aps审核-模电英文稿

2024-01-03 06:06:51

模拟电子线路
Analog circuit

需要熟悉课程名,一句话简单概括课程内容,准备一些重点内容介绍。

  1. This course mainly introduces the properties(n.性质) of semiconductors(半导体) and transistors, and then analyzes and masters amplification circuits.

  2. Semiconductors (e.g. Si, Ge) are materials whose conductivity is between an insulator(n.绝缘体) (e.g. dry wood) and a conductor (e.g. iron, water).
    When impurities(n.杂质) are added, the conductivity(n.导电能力) of semiconductors changes. Semiconductors can be classified two types:
    N-type semiconductors: It mainly uses electrons to conduct electricity.
    P-type semiconductors: It mainly uses holes to conduct electricity.
    Majority carriers(多数载流子)
    Minority carriers(少数载流子)

  3. When these 2 types semiconductors contact, holes and electrons will recombine, and then will form an intermediate region called PN junction.
    在这里插入图片描述
    When diffusion motion and charge region reach balance, the width of PN junction will not change.
    If an electric field is added, this balance is disrupted(v.破坏).
    If we add Forward bias(正向偏置) electric field, diffusion motion will become strong, and then form forward current. PN junction will become shorter.
    When the voltage is large enough, PN junction conduct.
    在这里插入图片描述
    If we add Reverse bias(反向偏置) electric field, the space charge region will become wide, diffusion motion become difficult and only minority carriers can move. PN junction will become wider.
    When the voltage is large enough, the current barely passes, called cut-off state.

  4. When PN junction add a shell(n.外壳), a diode is formed.
    Voltage-current characteristics of a diode is like this:
    在这里插入图片描述
    在这里插入图片描述
    Different materials have different conduct voltage: Silicon: 0.7V; Germanium(锗): 0.3V.
    Two classic applications: half-wave rectification, Zener diode(齐纳二极管).
    Half-wave rectification:
    在这里插入图片描述
    This circuit can change the alternating current(AC.交流电) to the direct current(DC. 直流电).
    在这里插入图片描述
    The half wave can pass, another half wave can’t pass.
    Zener diode works on reverse breakdown(反向击穿), on a certain current range, the voltage almost doesn’t change.
    在这里插入图片描述
    在这里插入图片描述
    Anode: 阳极; cathode: 阴极.

  5. If we use two PN junction, we can form triode transistor (BJT).
    It’s an important element for amplify circuit and it can amplify current.
    Depending on the applied voltage, it has 3 work regions:

  1. Cut-off region: the emitter junction voltage weaker than cut-in voltage and collector junction reverse bias.
  2. Amplifier region: the emitter junction forward bias and collector junction reverse bias.
  3. Saturation region: the emitter junction and collector junction forward bias.
    在这里插入图片描述
  1. Basic amplifying circuits:
    Basic common-emitter amplify circuit is like this:
    在这里插入图片描述
  1. When Ui=0, the amplifying circuit is in static state.
    The VBB makes the Ube> Uon, the VCC makes the collector junction reverse bias, so the triode transistor will work on amplify state.
    IC=βIB, for RC, the Uc= IC* RC, so Uce=Vcc- IC* RC.
  2. When Ui≠0, it will produce dynamic current ib, ic.
  1. Operational amplifying circuits(运算放大电路)
    It’s used to the operation of many analog signal, such as summation(求和), integral(积分), differencing(差分).
    在这里插入图片描述

文章来源:https://blog.csdn.net/y1456505611/article/details/135350671
本文来自互联网用户投稿,该文观点仅代表作者本人,不代表本站立场。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。