20231215给AIO-3399J适配Rockchip的原始Andorid的挖掘机开发板01

20231215给AIO-3399J适配Rockchip的原始Andorid的挖掘机开发板01
2023/12/15 10:49

【请严重注意：】如果刷不适配的SDK，可能会引起您的开发板【硬件发生物理】损坏！
如果您按照本步骤刷机引起的一切后果，请自行承担责任！
本人【明示】不承担任何责任。

开发板：Firefly的AIO-3399J
SDK：
AF6554D06A7C09C677BD3DB44A85A4AA ?Rockchip_Android10.0_SDK_Release.tar.gz00
6670B93020F599C2E67E7954368B0A5D ?Rockchip_Android10.0_SDK_Release.tar.gz01?
8EA0D6462402C53554B1E225B3E387A3 ?Rockchip_Android10.0_SDK_Release.tar.gz02
3C67DC7007F9E70A85F69370D7931D5E ?Rockchip_Android10.0_SDK_Release.tar.gz03
C901FB21C1A4417FAB187BB4ACCB569D ?Rockchip_Android10.0_SDK_Release.tar.gz04
BE04E2A442636E6983B188C681A52F9F ?Rockchip_Android10.0_SDK_Release.tar.gz05
D972C7CB0BF6C527EA592F34FD3396A3 ?Rockchip_Android10.0_SDK_Release.tar.gz06
A6279BE1EBD29C67C83288C4C1E5302E ?Rockchip_Android10.0_SDK_Release.tar.gz07
D23FDBA115E14EC2F9E5D7D0821FE000 ?Rockchip_Android10.0_SDK_Release.tar.gz08
B883B9689636F3ED97EE1CCC5DFB634A ?Rockchip_Android10.0_SDK_Release.tar.gz09

cat Rockchip_Android10.0_SDK_Release.tar.gz0* > Rockchip_Android10.0_SDK_Release.tar.gz
tar zxvf Rockchip_Android10.0_SDK_Release.tar.gz
.repo/repo/repo sync -l

rootroot@rootroot-X99-Turbo:~/3TB/Rockchip_Android10.0_SDK_Release$?
rootroot@rootroot-X99-Turbo:~/3TB/Rockchip_Android10.0_SDK_Release$ source build/envsetup.sh?
rootroot@rootroot-X99-Turbo:~/3TB/Rockchip_Android10.0_SDK_Release$?
rootroot@rootroot-X99-Turbo:~/3TB/Rockchip_Android10.0_SDK_Release$ lunch
? ? ?22. rk3399_Android10-userdebug
Which would you like? [aosp_arm-eng] 22
rootroot@rootroot-X99-Turbo:~/3TB/Rockchip_Android10.0_SDK_Release$?
rootroot@rootroot-X99-Turbo:~/3TB/Rockchip_Android10.0_SDK_Release$ ./build.sh -UACKu

刷机之后的LOG：

[BEGIN] 2023/12/15 10:31:31
DDR Version 1.24 20191016
In
channel 0
CS = 0
MR0=0x18
MR4=0x2
MR5=0x1
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x2
MR5=0x1
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 416MHz 0,1
Channel 0: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Channel 1: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
256B stride
channel 0
CS = 0
MR0=0x18
MR4=0x2
MR5=0x1
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x2
MR5=0x1
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 856MHz 1,0
ch 0 ddrconfig = 0x101, ddrsize = 0x20
ch 1 ddrconfig = 0x101, ddrsize = 0x20
pmugrf_os_reg[2] = 0x3281F281, stride = 0x9
OUT
Boot1 Release Time: Apr 23 2020 18:22:10, version: 1.25
CPUId = 0x0
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=29844MB
FwPartOffset=2000 , 100000
UsbBoot ...73611
powerOn 85830
DDR Version 1.24 20191016
In
soft reset
SRX
channel 0
CS = 0
MR0=0x18
MR4=0x2
MR5=0x1
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x2
MR5=0x1
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 416MHz 0,1
Channel 0: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Channel 1: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
256B stride
channel 0
CS = 0
MR0=0x18
MR4=0x2
MR5=0x1
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x2
MR5=0x1
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
channel 0, cs 0, advanced training done
channel 1, cs 0, advanced training done
change freq to 856MHz 1,0
ch 0 ddrconfig = 0x101, ddrsize = 0x20
ch 1 ddrconfig = 0x101, ddrsize = 0x20
pmugrf_os_reg[2] = 0x3281F281, stride = 0x9
ddr_set_rate to 328MHZ
ddr_set_rate to 666MHZ
ddr_set_rate to 416MHZ, ctl_index 0
ddr_set_rate to 856MHZ, ctl_index 1
support 416 856 328 666 MHz, current 856MHz
OUT
Boot1 Release Time: Apr 23 2020 18:20:09, version: 1.25
CPUId = 0x0
ChipType = 0x10, 428
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=29844MB
FwPartOffset=2000 , 100000
SdmmcInit=0 ffffffff
StorageInit ok = 55312
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT part: ?0, name: ? ? ? ? ? ?uboot, start:0x4000, size:0x2000
GPT part: ?1, name: ? ? ? ? ? ?trust, start:0x6000, size:0x2000
GPT part: ?2, name: ? ? ? ? ? ? misc, start:0x8000, size:0x2000
GPT part: ?3, name: ? ? ? ? ? ? ?dtb, start:0xa000, size:0x2000
GPT part: ?4, name: ? ? ? ? ? ? dtbo, start:0xc000, size:0x2000
GPT part: ?5, name: ? ? ? ? ? vbmeta, start:0xe000, size:0x800
GPT part: ?6, name: ? ? ? ? ? ? boot, start:0xe800, size:0x10000
GPT part: ?7, name: ? ? ? ? recovery, start:0x1e800, size:0x30000
GPT part: ?8, name: ? ? ? ? ? backup, start:0x4e800, size:0x38000
GPT part: ?9, name: ? ? ? ? security, start:0x86800, size:0x2000
GPT part: 10, name: ? ? ? ? ? ?cache, start:0x88800, size:0xc0000
GPT part: 11, name: ? ? ? ? metadata, start:0x148800, size:0x8000
GPT part: 12, name: ? ? ? ? ? ? ?frp, start:0x150800, size:0x400
GPT part: 13, name: ? ? ? ? ? ?super, start:0x150c00, size:0x614000
GPT part: 14, name: ? ? ? ? userdata, start:0x764c00, size:0x32e53df
find part:uboot OK. first_lba:0x4000.
find part:trust OK. first_lba:0x6000.
LoadTrust Addr:0x6000
No find bl30.bin
Load uboot, ReadLba = 4000
Load OK, addr=0x200000, size=0xf5b68
RunBL31 0x40000 @ 102396 us
NOTICE: ?BL31: v1.3(release):51fa197
NOTICE: ?BL31: Built : 14:53:31, Mar 13 2020
NOTICE: ?BL31: Rockchip release version: v1.1
INFO: ? ?GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO: ? ?Using opteed sec cpu_context!
INFO: ? ?boot cpu mask: 0
INFO: ? ?plat_rockchip_pmu_init(1191): pd status 3e
INFO: ? ?BL31: Initializing runtime services
INFO: ? ?BL31: Initializing BL32
INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-256-gebb61ff5 #4 Wed Apr 22 01:34:02 UTC 2020 aarch64)

INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.2

INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
INFO: ? ?BL31: Preparing for EL3 exit to normal world
INFO: ? ?Entry point address = 0x200000
INFO: ? ?SPSR = 0x3c9

U-Boot 2017.09 #rootroot (Dec 15 2023 - 08:56:04 +0800)

Model: Rockchip RK3399 Evaluation Board
PreSerial: 2
DRAM: ?2 GiB
Sysmem: init
Relocation Offset: 7dbce000, fdt: 7bdc2358
Using default environment

dwmmc@fe320000: 1, sdhci@fe330000: 0
Bootdev(atags): mmc 0
MMC0: HS400, 150Mhz
PartType: EFI
Android 10.0, Build 2020.5
boot mode: recovery (misc)
Found DTB in recovery part
DTB: rk-kernel.dtb
HASH(c): OK
ANDROID: fdt overlay OK
I2c0 speed: 400000Hz
PMIC: ?RK808?
vdd_center 900000 uV
vdd_cpu_l 900000 uV
vdd_log 0 uV

[END] 2023/12/15 10:33:06
?

根据在firefly的AIO-3568J开发板的经验，直接整体替换掉u-boot部分：还是启动不了！

刷机之后的LOG：

DDR Version 1.24 20191016
In
channel 0
CS = 0
MR0=0x18
MR4=0x2
MR5=0x1
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x2
MR5=0x1
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 416MHz 0,1
Channel 0: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Channel 1: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
256B stride
channel 0
CS = 0
MR0=0x18
MR4=0x2
MR5=0x1
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x2
MR5=0x1
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 856MHz 1,0
ch 0 ddrconfig = 0x101, ddrsize = 0x20
ch 1 ddrconfig = 0x101, ddrsize = 0x20
pmugrf_os_reg[2] = 0x3281F281, stride = 0x9
OUT
Boot1 Release Time: Apr 23 2020 18:22:10, version: 1.25
CPUId = 0x0
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=29844MB
FwPartOffset=2000 , 100000
UsbBoot ...98337
powerOn 110554
DDR Version 1.24 20191016
In
soft reset
SRX
channel 0
CS = 0
MR0=0x18
MR4=0x2
MR5=0x1
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x2
MR5=0x1
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 416MHz 0,1
Channel 0: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Channel 1: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
256B stride
channel 0
CS = 0
MR0=0x18
MR4=0x2
MR5=0x1
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x2
MR5=0x1
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
channel 0, cs 0, advanced training done
channel 1, cs 0, advanced training done
change freq to 856MHz 1,0
ch 0 ddrconfig = 0x101, ddrsize = 0x20
ch 1 ddrconfig = 0x101, ddrsize = 0x20
pmugrf_os_reg[2] = 0x3281F281, stride = 0x9
ddr_set_rate to 328MHZ
ddr_set_rate to 666MHZ
ddr_set_rate to 416MHZ, ctl_index 0
ddr_set_rate to 856MHZ, ctl_index 1
support 416 856 328 666 MHz, current 856MHz
OUT
Boot1 Release Time: Apr 23 2020 18:20:09, version: 1.25
CPUId = 0x0
ChipType = 0x10, 427
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=29844MB
FwPartOffset=2000 , 100000
SdmmcInit=0 ffffffff
StorageInit ok = 55663
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT part: ?0, name: ? ? ? ? ? ?uboot, start:0x4000, size:0x2000
GPT part: ?1, name: ? ? ? ? ? ?trust, start:0x6000, size:0x2000
GPT part: ?2, name: ? ? ? ? ? ? misc, start:0x8000, size:0x2000
GPT part: ?3, name: ? ? ? ? ? ? ?dtb, start:0xa000, size:0x2000
GPT part: ?4, name: ? ? ? ? ? ? dtbo, start:0xc000, size:0x2000
GPT part: ?5, name: ? ? ? ? ? vbmeta, start:0xe000, size:0x800
GPT part: ?6, name: ? ? ? ? ? ? boot, start:0xe800, size:0x10000
GPT part: ?7, name: ? ? ? ? recovery, start:0x1e800, size:0x30000
GPT part: ?8, name: ? ? ? ? ? backup, start:0x4e800, size:0x38000
GPT part: ?9, name: ? ? ? ? security, start:0x86800, size:0x2000
GPT part: 10, name: ? ? ? ? ? ?cache, start:0x88800, size:0xc0000
GPT part: 11, name: ? ? ? ? metadata, start:0x148800, size:0x8000
GPT part: 12, name: ? ? ? ? ? ? ?frp, start:0x150800, size:0x400
GPT part: 13, name: ? ? ? ? ? ?super, start:0x150c00, size:0x614000
GPT part: 14, name: ? ? ? ? userdata, start:0x764c00, size:0x32e53df
find part:uboot OK. first_lba:0x4000.
find part:trust OK. first_lba:0x6000.
LoadTrust Addr:0x6000
LoadTrust Addr:0x6400
LoadTrust Addr:0x6800
LoadTrust Addr:0x6c00
LoadTrust Addr:0x7000
LoadTrust Addr:0x7400
LoadTrust Addr:0x7800
LoadTrust Addr:0x7c00
Addr:0x6000 No find trust.img!
LoadTrustBL error:-3
DDR Version 1.24 20191016
In
soft reset
SRX
channel 0
CS = 0
MR0=0x18
MR4=0x2
MR5=0x1
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x2
MR5=0x1
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 416MHz 0,1
Channel 0: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Channel 1: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
256B stride
channel 0
CS = 0
MR0=0x18
MR4=0x2
MR5=0x1
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x2
MR5=0x1
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 856MHz 1,0
ch 0 ddrconfig = 0x101, ddrsize = 0x20
ch 1 ddrconfig = 0x101, ddrsize = 0x20
pmugrf_os_reg[2] = 0x3281F281, stride = 0x9
OUT
Boot1 Release Time: Apr 23 2020 18:22:10, version: 1.25
CPUId = 0x0
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=29844MB
FwPartOffset=2000 , 100000
UsbBoot ...74504
powerOn 86769
DDR Version 1.24 20191016
In
soft reset
SRX
channel 0
CS = 0
MR0=0x18
MR4=0x2
MR5=0x1
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x2
MR5=0x1
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 416MHz 0,1
Channel 0: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Channel 1: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
256B stride
channel 0
CS = 0
MR0=0x18
MR4=0x2
MR5=0x1
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x2
MR5=0x1
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
channel 0, cs 0, advanced training done
channel 1, cs 0, advanced training done
change freq to 856MHz 1,0
ch 0 ddrconfig = 0x101, ddrsize = 0x20
ch 1 ddrconfig = 0x101, ddrsize = 0x20
pmugrf_os_reg[2] = 0x3281F281, stride = 0x9
ddr_set_rate to 328MHZ
ddr_set_rate to 666MHZ
ddr_set_rate to 416MHZ, ctl_index 0
ddr_set_rate to 856MHZ, ctl_index 1
support 416 856 328 666 MHz, current 856MHz
OUT
Boot1 Release Time: Apr 23 2020 18:20:09, version: 1.25
CPUId = 0x0
ChipType = 0x10, 427
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=29844MB
FwPartOffset=2000 , 100000
SdmmcInit=0 ffffffff
StorageInit ok = 55204
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT part: ?0, name: ? ? ? ? ? ?uboot, start:0x4000, size:0x2000
GPT part: ?1, name: ? ? ? ? ? ?trust, start:0x6000, size:0x2000
GPT part: ?2, name: ? ? ? ? ? ? misc, start:0x8000, size:0x2000
GPT part: ?3, name: ? ? ? ? ? ? ?dtb, start:0xa000, size:0x2000
GPT part: ?4, name: ? ? ? ? ? ? dtbo, start:0xc000, size:0x2000
GPT part: ?5, name: ? ? ? ? ? vbmeta, start:0xe000, size:0x800
GPT part: ?6, name: ? ? ? ? ? ? boot, start:0xe800, size:0x10000
GPT part: ?7, name: ? ? ? ? recovery, start:0x1e800, size:0x30000
GPT part: ?8, name: ? ? ? ? ? backup, start:0x4e800, size:0x38000
GPT part: ?9, name: ? ? ? ? security, start:0x86800, size:0x2000
GPT part: 10, name: ? ? ? ? ? ?cache, start:0x88800, size:0xc0000
GPT part: 11, name: ? ? ? ? metadata, start:0x148800, size:0x8000
GPT part: 12, name: ? ? ? ? ? ? ?frp, start:0x150800, size:0x400
GPT part: 13, name: ? ? ? ? ? ?super, start:0x150c00, size:0x614000
GPT part: 14, name: ? ? ? ? userdata, start:0x764c00, size:0x32e53df
find part:uboot OK. first_lba:0x4000.
find part:trust OK. first_lba:0x6000.
LoadTrust Addr:0x6000
No find bl30.bin
Load uboot, ReadLba = 4000
Load OK, addr=0x200000, size=0x101868
RunBL31 0x40000 @ 102987 us
NOTICE: ?BL31: v1.3(release):51fa197
NOTICE: ?BL31: Built : 14:53:31, Mar 13 2020
NOTICE: ?BL31: Rockchip release version: v1.1
INFO: ? ?GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO: ? ?Using opteed sec cpu_context!
INFO: ? ?boot cpu mask: 0
INFO: ? ?plat_rockchip_pmu_init(1191): pd status 3e
INFO: ? ?BL31: Initializing runtime services
INFO: ? ?BL31: Initializing BL32
INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-256-gebb61ff5 #4 Wed Apr 22 01:34:02 UTC 2020 aarch64)

INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.2

INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
INFO: ? ?BL31: Preparing for EL3 exit to normal world
INFO: ? ?Entry point address = 0x200000
INFO: ? ?SPSR = 0x3c9

U-Boot 2017.09 (Dec 15 2023 - 10:35:06 +0800)

Model: Rockchip RK3399 Evaluation Board
PreSerial: 2, raw, 0xff1a0000
DRAM: ?2 GiB
Sysmem: init
Relocation Offset: 7db7a000
Relocation fdt: 7bd6e2d0 - 7bd70ceb
CR: M/C/I
Using default environment

dwmmc@fe320000: 1, sdhci@fe330000: 0
Bootdev(atags): mmc 0
MMC0: HS400, 150Mhz
PartType: EFI
boot mode: recovery (misc)
Android 10.0, Build 2020.5, v2
Found DTB in recovery part
DTB: rk-kernel.dtb
HASH(c): OK
ANDROID: fdt overlay OK
I2c0 speed: 400000Hz
PMIC: ?RK808?
vdd_center 900000 uV
vdd_cpu_l 900000 uV
vdd_log 1100000 uV
Could not find baseparameter partition
Model: Rockchip RK3399 Excavator Board edp avb (Android)
no key node
Rockchip UBOOT DRM driver version: v1.0.1
Using display timing dts
Detailed mode clock 200000 kHz, flags[a]
? ? H: 1536 1548 1564 1612
? ? V: 2048 2056 2060 2068
bus_format: 100e
AUX CH command reply failed!
AUX CH error happens: 2
AUX CH command reply failed!
AUX CH error happens: 2
AUX CH command reply failed!
AUX CH error happens: 2
failed to get Rx Max Link Rate
failed to init training
unable to do link train
CLK: (uboot. arml: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
CLK: (uboot. armb: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
? aplll 816000 KHz
? apllb 816000 KHz
? dpll 856000 KHz
? cpll 200000 KHz
? gpll 800000 KHz
? npll 600000 KHz
? vpll 24000 KHz
? aclk_perihp 133333 KHz
? hclk_perihp 66666 KHz
? pclk_perihp 33333 KHz
? aclk_perilp0 266666 KHz
? hclk_perilp0 88888 KHz
? pclk_perilp0 44444 KHz
? hclk_perilp1 100000 KHz
? pclk_perilp1 50000 KHz
Net: ? eth0: ethernet@fe300000
Hit key to stop autoboot('CTRL+C'): ?0?
emmc boot?
No FDT memory address configured. Default at 0x08300000
libfdt fdt_getprop(): FDT_ERR_NOTFOUND
lzf debug,store_value=Rockchip RK3399 Excavator Board edp avb (Android)
ANDROID: reboot reason: "recovery"
optee check api revision fail: 1.0
optee api revision is too low
### ERROR ### Please RESET the board ###

[END] 2023/12/15 10:53:00
?