立体匹配算法(Stereo correspondence)SGM

2023-12-27 23:42:02

SGM(Semi-Global Matching)原理:

SGM的原理在wiki百科和matlab官网上有比较详细的解释:
wiki matlab
如果想完全了解原理还是建议看原论文 paper(我就不看了,懒癌犯了。)
优质论文解读和代码实现
一位大神自己用c++实现的SGM算法github
先介绍两个重要的参数:
注:这一部分参考的是matlab的解释,后面的部分是参考的opencv的实现,细节可能有些出入,大体上是一致的。
Disparity Levels and Number of Directions

Disparity Levels

Disparity Levels: Disparity levels is a parameter used to define the search space for matching. As shown in figure below, the algorithm searches for each pixel in the Left Image from among D pixels in the Right Image. The D values generated are D disparity levels for a pixel in Left Image. The first D columns of Left Image are unused because the corresponding pixels in Right Image are not available for comparison. In the figure, w represents the width of the image and h is the height of the image. For a given image resolution, increasing the disparity level reduces the minimum distance to detect depth. Increasing the disparity level also increases the computation load of the algorithm. At a given disparity level, increasing the image resolution increases the minimum distance to detect depth. Increasing the image resolution also increases the accuracy of depth estimation. The number of disparity levels are proportional to the input image resolution for detection of objects at the same depth. This example supports disparity levels from 8 to 128 (both values inclusive). The explanation of the algorithm refers to 64 disparity levels. The models provided in this example can accept input images of any resolution.——matlab

字太多,看不懂,让gpt解释了一下:

# gpt生成,仅供本人理解SSD原理
import numpy as np

def compute_disparity(left_img, right_img, block_size=5, num_disparities=64):
    # 图像尺寸
    height, width = left_img.shape

    # 初始化视差图
    disparity_map = np.zeros_like(left_img)

    # 遍历每个像素
    for y in range(height):
        for x in range(width):
            # 定义搜索范围
            min_x = max(0, x - num_disparities // 2)
            max_x = min(width, x + num_disparities // 2)

            # 提取左图像块
            left_block = left_img[y:y+block_size, x:x+block_size]

            # 初始化最小 SSD 和对应的视差
            min_ssd = float('inf')
            best_disparity = 0

            # 在搜索范围内寻找最佳视差
            for d in range(min_x, max_x):
                # 提取右图像块
                right_block = right_img[y:y+block_size, d:d+block_size]

                # 计算 SSD
                ssd = np.sum((left_block - right_block)**2)

                # 更新最小 SSD 和对应的视差
                if ssd < min_ssd:
                    min_ssd = ssd
                    best_disparity = abs(x - d)

            # 将最佳视差保存到视差图中
            disparity_map[y, x] = best_disparity

    return disparity_map

# 示例用法
left_img = np.random.randint(0, 255, size=(100, 100), dtype=np.uint8)
right_img = np.roll(left_img, shift=5, axis=1)  # 创建右图,右移了5个像素

disparity_map = compute_disparity(left_img, right_img, block_size=5, num_disparities=64)

# 可视化结果(这里简化为将视差图缩放以便可视化)
import matplotlib.pyplot as plt
plt.imshow(disparity_map, cmap='gray')
plt.title('Disparity Map')
plt.show()

这样就明白了,Disparity Levels就是计算视差的范围(视差搜索范围)。

Number of Directions

Number of Directions:

Number of Directions: In the SGBM algorithm, to optimize the cost function, the input image is considered from multiple directions. In general, accuracy of disparity result improves with increase in number of directions. This example analyzes five directions: left-to-right (A1), top-left-to-bottom-right (A2), top-to-bottom (A3), top-right-to-bottom-left (A4), and right-to-left (A5).
在这里插入图片描述

按照单一路径匹配像素不够稳健,按照图像进行二维最优的全局匹配时间复杂度太高(NP完全问题),所以SGM的作者使用一维路径聚合的方式来近似二维最优。
在这里插入图片描述
pic 参考

SAD和SSD

用SAD 或者 SSD计算图像相似度,来做匹配。
公式:
> 这里是引用
公式和代码虽然是gpt生成的,但是公式看起来没错,代码可以帮助理解,仅供参考。
代码里面的 num_disparities 就是 Disparity Levels

SGBM in opencv

本人用opencv较多,这里仅关注代码在opencv的实现。

opencv StereoSGBM_create示例:

# gpt生成,仅作为参考,具体请查看opencv官方文档https://docs.opencv.org/4.x/d2/d85/classcv_1_1StereoSGBM.html
import cv2
import numpy as np

# 读取左右视图
left_image = cv2.imread('left_image.png', cv2.IMREAD_GRAYSCALE)
right_image = cv2.imread('right_image.png', cv2.IMREAD_GRAYSCALE)

# 创建SGBM对象
sgbm = cv2.StereoSGBM_create(
    minDisparity=0,
    numDisparities=16,  # 视差范围,一般为16的整数倍
    blockSize=5,        # 匹配块的大小,一般为奇数
    P1=8 * 3 * 5 ** 2,   # SGBM算法参数
    P2=32 * 3 * 5 ** 2,  # SGBM算法参数
    disp12MaxDiff=1,    # 左右视差图的最大差异
    uniquenessRatio=10,  # 匹配唯一性百分比
    speckleWindowSize=100,  # 过滤小连通区域的窗口大小
    speckleRange=32      # 连通区域内的差异阈值
)

# 计算视差图
disparity_map = sgbm.compute(left_image, right_image)

# 将视差图进行归一化处理
disparity_map = cv2.normalize(disparity_map, None, 0, 255, cv2.NORM_MINMAX)

# 显示左图、右图和视差图
cv2.imshow('Left Image', left_image)
cv2.imshow('Right Image', right_image)
cv2.imshow('Disparity Map', disparity_map.astype(np.uint8))

cv2.waitKey(0)
cv2.destroyAllWindows()

Difference between SGBM and SGM

what is the difference between opencv sgbm and sgm
opencv官方的解释:
The class implements the modified H. Hirschmuller algorithm [82] that differs from the original one as follows:

  1. By default, the algorithm is single-pass, which means that you consider only 5 directions instead of 8. Set mode=StereoSGBM::MODE_HH in createStereoSGBM to run the full variant of the algorithm but beware that it may consume a lot of memory.
  2. The algorithm matches blocks, not individual pixels. Though, setting blockSize=1 reduces the blocks to single pixels.
  3. Mutual information cost function is not implemented. Instead, a simpler Birchfield-Tomasi sub-pixel metric from [15] is used. Though, the color images are supported as well.
    Some pre- and post- processing steps from K. Konolige algorithm StereoBM are included, for example: pre-filtering (StereoBM::PREFILTER_XSOBEL type) and post-filtering (uniqueness check, quadratic interpolation and speckle filtering).

文章来源:https://blog.csdn.net/onlyyoujojo/article/details/135244558
本文来自互联网用户投稿,该文观点仅代表作者本人,不代表本站立场。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。