linux驱动(一):led

2023-12-31 23:27:43

? ? ? ? 本文主要探讨210的led驱动相关知识。?

驱动
????????操作系统驱动硬件的代码,驱动上层是系统调用API,下层是硬件
????????宏内核:内核整体上为一个过程实现,运行在同一地址空间,相互调用简单高效
????????微内核:功能为独立过程,过程间通过IPC通信
????????linux本质上是宏内核兼具微内核模块化特性
????????静态模块化编译时可裁剪但需重新编译,动态模块化模块自动安装和卸载
????????字符设备软件是以字节为单位进行操作的,块设备,块设备是以块(多字节)为单位操作,网络设备为网卡驱动

驱动模块命令
????????lsmod打印内核已经安装模块列表
????????insmod安装模块
????????modinfo打印模块信息
????????rmmod卸载已经安装模块
????????modprobe加载或卸载模块及依赖模块
????????加载:modprobe xxx
????????卸载:modprobe -r xxx
????????depmod载入模块依赖到modules.dep

常用宏(modinfo查看)

????????MODULE_LICENSE("GPL")?模块许可包括:GPL、GPL V2、GPL and additional rights、Dial BSD/GPL、Dual ????????MPL/GPL、Proprietary通常为为GPL v2
????????MODULE_AUTHOR("xxx")添加模块作者信息
????????MODULE_DESCRIPTION("xxx")添加模块描述信息
????????MODULE_ALIAS("xxxx")添加模块别名
????????module_init(moudle_test_init);
????????module_exit(moudle_test_exit);
????????module_init宏声明驱动初始化函数,初始化函数和insmod命令绑定
????????module_exit宏声明驱动卸载函数,卸载函数和rmsmod命令绑定

函数及修饰符

include/linux/init.h
#define __init?? ??? ?__section(.init.text) __cold notrace
#define __exit ? ? ? ?__section(.exit.text) __exitused __cold

????????__init是宏定义,__init将修饰函数放入.init.text段,内核启动时加载.init.text段模块函数初始化
????????__exit是宏定义,__exit将修饰函数放入.exit.text段,内核结束时加载.init.text段模块函数释放内存

?????????printk为内核中包含打印级别的功能的函数,/proc/sys/kernel/printk可查看当前系统的打印级别,高于打印级别未打印出的信息用dmesg查看

include/linux/kernel.h
#define?? ?KERN_EMERG?? ?"<0>"?? ?/* system is unusable?? ??? ??? ?*/
#define?? ?KERN_ALERT?? ?"<1>"?? ?/* action must be taken immediately?? ?*/
#define?? ?KERN_CRIT?? ?"<2>"?? ?/* critical conditions?? ??? ??? ?*/
#define?? ?KERN_ERR?? ?"<3>"?? ?/* error conditions?? ??? ??? ?*/
#define?? ?KERN_WARNING?? ?"<4>"?? ?/* warning conditions?? ??? ??? ?*/
#define?? ?KERN_NOTICE?? ?"<5>"?? ?/* normal but significant condition?? ?*/
#define?? ?KERN_INFO?? ?"<6>"?? ?/* informational?? ??? ??? ?*/
#define?? ?KERN_DEBUG?? ?"<7>"?? ?/* debug-level messages?? ??? ??? ?*/

????????file_operations结构体的元素主要是函数指针,设备驱动都有该结构体类型变量,设备驱动向内核注册时提供该结构体类型的变量(file_operations的详细介绍可看本博客:树莓派(四):内核驱动框架

struct file_operations {
?? ?struct module *owner;
?? ?loff_t (*llseek) (struct file *, loff_t, int);
?? ?ssize_t (*read) (struct file *, char __user *, size_t, loff_t *);
?? ?ssize_t (*write) (struct file *, const char __user *, size_t, loff_t *);
?? ?ssize_t (*aio_read) (struct kiocb *, const struct iovec *, unsigned long, loff_t);
?? ?ssize_t (*aio_write) (struct kiocb *, const struct iovec *, unsigned long, loff_t);
?? ?int (*readdir) (struct file *, void *, filldir_t);
?? ?unsigned int (*poll) (struct file *, struct poll_table_struct *);
?? ?int (*ioctl) (struct inode *, struct file *, unsigned int, unsigned long);
?? ?long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long);
?? ?long (*compat_ioctl) (struct file *, unsigned int, unsigned long);
?? ?int (*mmap) (struct file *, struct vm_area_struct *);
?? ?int (*open) (struct inode *, struct file *);
?? ?int (*flush) (struct file *, fl_owner_t id);
?? ?int (*release) (struct inode *, struct file *);
?? ?int (*fsync) (struct file *, int datasync);
?? ?int (*aio_fsync) (struct kiocb *, int datasync);
?? ?int (*fasync) (int, struct file *, int);
?? ?int (*lock) (struct file *, int, struct file_lock *);
?? ?ssize_t (*sendpage) (struct file *, struct page *, int, size_t, loff_t *, int);
?? ?unsigned long (*get_unmapped_area)(struct file *, unsigned long, unsigned long, unsigned long, unsigned long);
?? ?int (*check_flags)(int);
?? ?int (*flock) (struct file *, int, struct file_lock *);
?? ?ssize_t (*splice_write)(struct pipe_inode_info *, struct file *, loff_t *, size_t, unsigned int);
?? ?ssize_t (*splice_read)(struct file *, loff_t *, struct pipe_inode_info *, size_t, unsigned int);
?? ?int (*setlease)(struct file *, long, struct file_lock **);
};
static inline int register_chrdev(unsigned int major, const char *name,
?? ??? ??? ??? ? ?const struct file_operations *fops)
{
?? ?return __register_chrdev(major, 0, 256, name, fops);
}


????????register_chrdev(linux/fs.h)驱动向内核注册自己的file_operations
????????major为设备驱动编号,为0则为自动分配,其他为静态注册(/proc/devices可查看驱动编号)
????????name为驱动名称,fops为驱动申请的file_opearatios

copy_to_user(void __user *to, const void *from, unsigned long n)

????????将数据从用户空间复制到内核空间

copy_from_user(void __user *to, const void *from, usigned long count);

????????将数据从内核空间复制到用户空间

虚拟地址映射
????????驱动操控硬件,操控硬件物理地址在内核中的虚拟地址
????????静态虚拟地址映射:内核启动时建立静态映射表(硬编码),岁内核销毁
????????动态虚拟地址映射:动态建立映射、使用、销毁映射,映射是临时的

????????led驱动静态映射(s5pv210)

arch/arm/mach-s5pv210/include/mach/gpio-bank.h
#define S5PV210_GPJ0CON?? ??? ??? ?(S5PV210_GPJ0_BASE + 0x00)
#define S5PV210_GPJ0DAT?? ??? ??? ?(S5PV210_GPJ0_BASE + 0x04)
#define S5PV210_GPJ0PUD?? ??? ??? ?(S5PV210_GPJ0_BASE + 0x08)
#define S5PV210_GPJ0DRV?? ??? ??? ?(S5PV210_GPJ0_BASE + 0x0c)
#define S5PV210_GPJ0CONPDN?? ??? ?(S5PV210_GPJ0_BASE + 0x10)
#define S5PV210_GPJ0PUDPDN?? ??? ?(S5PV210_GPJ0_BASE + 0x14)
arch/arm/mach-s5pv210/include/mach/regs-gpio.h
define S5PV210_GPJ0_BASE?? ??? ?(S5P_VA_GPIO + 0x240)
#define S5P_VA_GPIO?? ??? ?S3C_ADDR(0x00500000)
#define S3C_ADDR(x)?? ?(S3C_ADDR_BASE + (x))
#define S3C_ADDR_BASE?? ?(0xFD000000)?? ??? ?//静态映射表基地址
arch/arm/plat-s5p/include/plat/map-s5p.h

????????led驱动态映射

#define request_mem_region(start,n,name) __request_region(&iomem_resource, (start), (n), (name), 0)

????????向内核申请映射内存资源,start:物理地址,n大小,name名字

#define ioremap(cookie,size)?? ??? ?__arch_ioremap((cookie), (size), MT_DEVICE)

????????返回映射的虚拟地址,cookie:物理地址,szie大小

#define iounmap(cookie)?? ??? ??? ?__iounmap(cookie)

????????解除映射虚拟地址,cookie:物理地址

#define release_mem_region(start,n)?? ?__release_region(&iomem_resource, (start), (n))

????????释放申请,start:物理地址,n大小,name名字

demo:?

? ? ? ? 210已移植uboot(ntfs,tftp),kernel,busynox

? ? ? ? ubuntu安装ntfs,tftp

? ? ? ? led驱动(静态虚拟地址映射)

led.c

#include <stdio.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <string.h>
#include <unistd.h>

#define FILE    "/dev/led"

char buf[16];
char led_cmd[3][4];

void div_cmd(char *str)
{
        unsigned int m = 0;
        unsigned int n = 0;
        memset(led_cmd,'\0',sizeof(led_cmd));
 
        while(*str != '\0')
        {
                if(*str != ' ')
                {
                        led_cmd[m][n] = *str;
                        n++;
                }
                else
                {
                        led_cmd[m][n] = '\0';
                        n = 0;
                        m++;
                }
                str++;
        }
}

void write_buf()
{
        int i;

        memset(buf,'\0',sizeof(buf));
        if(!strcmp(led_cmd[1],"on"))
                buf[0] = '0';
        if(!strcmp(led_cmd[1],"off"))
                buf[0] = '1';
        buf[1] = *(led_cmd[2]);
} 

int main()
{
        int fd = -1;
        char cmd[16];
        fd = open(FILE, O_RDWR);
        if (fd < 0)
        {
                printf("open %s error.\n", FILE);
                return -1;
        }

        printf("input led cmd :led on|off 1|2|3\n");
        while(1)
        {
                memset(cmd,'\0',sizeof(cmd));
                printf(">>>>");
                fgets(cmd,16,stdin);
                if(cmd[0] == '.' && cmd[1] == 'q')
                {
                        break;
                }
                div_cmd(cmd);
                write_buf();
                write(fd,buf,strlen(buf));
        }
        close(fd);

        return 0;
}

led_static_module.c?

cat: cat: 没有那个文件或目录
#include <linux/module.h>               // module_init  module_exit
#include <linux/init.h>                 // __init   __exit
#include <linux/fs.h>
#include <linux/string.h>
#include <asm/uaccess.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-bank.h>
#include <linux/io.h>
#include <linux/ioport.h>

#define NAME "led"

int major;
char kbuf[16];

#define GPJ0CON         S5PV210_GPJ0CON
#define GPJ0DAT         S5PV210_GPJ0DAT

#define rGPJ0CON        *((volatile unsigned int *)GPJ0CON)
#define rGPJ0DAT        *((volatile unsigned int *)GPJ0DAT)

static int led_open(struct inode *inode, struct file *file)
{
        printk(KERN_INFO "led_dev_open\n");
        return 0;
}


static int led_close(struct inode *inode, struct file *file)
{
        rGPJ0DAT = ((1<<3) | (1<<4) | (1<<5));
        printk(KERN_INFO "led_dev_close\n");
        return 0;
}

static ssize_t led_write(struct file *file, const char __user *ubuf,size_t count, loff_t *ppos)
{
        int ret = -1;
        int led;

        memset(kbuf, 0, sizeof(kbuf));
        ret = copy_from_user(kbuf, ubuf, count);
        if (ret)
        {
                printk(KERN_ERR "copy_from_user error\n");
                return ret;
        }

        led = kbuf[1] - '0' + 2;

        if (kbuf[0] == '0')
        {
                rGPJ0DAT &= ~(1<<led);
        }
        else if (kbuf[0] == '1')
        {
                rGPJ0DAT |= (1<<led);
        }

        printk(KERN_INFO "copy_from_user ok  %d\n",led);

        return 0;
}

ssize_t led_read(struct file *file, char __user *buf, size_t size, loff_t *ppos)
{
        int ret = -1;

        ret = copy_to_user(buf, kbuf, size);
        if (ret)
        {
                printk(KERN_ERR "copy_to_user error\n");
                return ret;
        }
        printk(KERN_INFO "copy_to_user ok\n");

        return 0;
}


static const struct file_operations led_fops = {
        .owner          = THIS_MODULE,
        .open           = led_open,
        .release        = led_close,
        .write          = led_write,
        .read           = led_read,
};



static int __init led_dev_init()
{
        rGPJ0CON = 0x11111111;
        major = register_chrdev(0, NAME, &led_fops);
        printk(KERN_INFO "register success,major:%d\n",major);

        return 0;
}

static int __exit led_dev_exit()
{
        rGPJ0DAT = ((1<<3) | (1<<4) | (1<<5));
        unregister_chrdev(major, NAME);
        printk(KERN_INFO "Cancel register\n");
        return 0;
}


module_init(led_dev_init);
module_exit(led_dev_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("cxb");
MODULE_DESCRIPTION("led static module");
MODULE_ALIAS("led");

Makefile?

KERN_DIR = /root/kernel

obj-m   += led_static_module.o

all:
        make -C $(KERN_DIR) M=`pwd` modules 
        arm-linux-gcc led.c -o led

cp:
        cp *.ko /root/rootfs/driver
        cp led /root/rootfs/driver


.PHONY: clean
clean:
        make -C $(KERN_DIR) M=`pwd` modules clean
        rm -rf ./led

结果显示:?

?????????led驱动(动态虚拟地址映射)

led.c(同上)

led_dynamic_module.c

#include <linux/module.h>               // module_init  module_exit
#include <linux/init.h>                 // __init   __exit
#include <linux/fs.h>
#include <linux/string.h>
#include <asm/uaccess.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-bank.h>
#include <linux/io.h>
#include <linux/ioport.h>

#define NAME "led"

int major;
char kbuf[16];

#define GPJ0CON_PA      0xe0200240
#define GPJ0DAT_PA      0xe0200244

unsigned int *rGPJ0CON;
unsigned int *rGPJ0DAT;

static int led_open(struct inode *inode, struct file *file)
{
        printk(KERN_INFO "led_dev_open\n");
        return 0;
}


static int led_close(struct inode *inode, struct file *file)
{
        *rGPJ0DAT = ((1<<3) | (1<<4) | (1<<5));
        printk(KERN_INFO "led_dev_close\n");
        return 0;
}

static ssize_t led_write(struct file *file, const char __user *ubuf,size_t count, loff_t *ppos)
{
        int ret = -1;
        int led;

        memset(kbuf, 0, sizeof(kbuf));
        ret = copy_from_user(kbuf, ubuf, count);
        if (ret)
        {
                printk(KERN_ERR "copy_from_user error\n");
                return ret;
        }

        led = kbuf[1] - '0' + 2;

        if (kbuf[0] == '0')
        {
                *rGPJ0DAT &= ~(1<<led);
        }
        else if (kbuf[0] == '1')
        {
                *rGPJ0DAT |= (1<<led);
        }

        printk(KERN_INFO "copy_from_user ok  %d\n",led);

        return 0;
}

ssize_t led_read(struct file *file, char __user *buf, size_t size, loff_t *ppos)
{
        int ret = -1;

        ret = copy_to_user(buf, kbuf, size);
        if (ret)
        {
                printk(KERN_ERR "copy_to_user error\n");
                return ret;
        }
        printk(KERN_INFO "copy_to_user ok\n");

        return 0;
}


static const struct file_operations led_fops = {
        .owner          = THIS_MODULE,
        .open           = led_open,
        .release        = led_close,
        .write          = led_write,
        .read           = led_read,
};



static int __init led_dev_init()
{
        major = register_chrdev(0, NAME, &led_fops);
        printk(KERN_INFO "register success,major:%d\n",major);

        if (!request_mem_region(GPJ0CON_PA, 4, "GPJ0CON"))
                return -EINVAL;
        if (!request_mem_region(GPJ0DAT_PA, 4, "GPJ0CON"))
                return -EINVAL;
        rGPJ0CON = ioremap(GPJ0CON_PA, 4);
        rGPJ0DAT = ioremap(GPJ0DAT_PA, 4);
        *rGPJ0CON = 0x11111111;

        return 0;
}

static int __exit led_dev_exit()
{
        rGPJ0DAT = ((1<<3) | (1<<4) | (1<<5));
        iounmap(rGPJ0CON);
        iounmap(rGPJ0DAT);
        release_mem_region(GPJ0CON_PA, 4);
        release_mem_region(GPJ0DAT_PA, 4);
        unregister_chrdev(major, NAME);
        printk(KERN_INFO "Cancel register\n");
        return 0;
}


module_init(led_dev_init);
module_exit(led_dev_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("cxb");
MODULE_DESCRIPTION("led static module");
MODULE_ALIAS("led");

Makefile?

KERN_DIR = /root/kernel

obj-m   += led_dynamic_module.o

all:
        make -C $(KERN_DIR) M=`pwd` modules 
        arm-linux-gcc led.c -o led

cp:
        cp *.ko /root/rootfs/driver
        cp led /root/rootfs/driver


.PHONY: clean
clean:
        make -C $(KERN_DIR) M=`pwd` modules clean
        rm -rf ./led

结果显示:?

文章来源:https://blog.csdn.net/tyro_wzp/article/details/135319589
本文来自互联网用户投稿,该文观点仅代表作者本人,不代表本站立场。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。