Springcloud 微服务实战笔记 Feign
优点
基于Netflix Feign实现,整合了Spring cloud Ribbon 和 Spring cloud Hystrix
提供了声明式的WEB服务客户端定义方式
扩展了Spring MVC的注解支持
使用
1、pom导入包:
<dependency>
<groupId>org.springframework.cloud</groupId>
<artifactId>spring-cloud-starter-feign</artifactId>
<version>1.4.4.RELEASE</version>
</dependency>
2、接口增加注解:?@FeignClient
@FeignClient(name = "spring-cloud-study-demo")
public interface DemoRemoteClient {
@GetMapping("/demo/getData/{uid}")
public ApiReturnObject getData(@PathVariable(value="uid") String uid,@RequestParam(value="data") String data);
}
注解@FeignClient的name参数配置为服务名(服务提供方可以自己随便写一个)
?
3、Controller直接调用
@RestController
public class FeignController {
@Resource
DemoRemoteClient demoRemoteClient;
@GetMapping("/remote/demo/getData/{uid}")
public ApiReturnObject basePath(@PathVariable String uid ,String data){
return demoRemoteClient.getData(uid, data);
}
}
4、启动类增加注解 @EnableFeignClients
@EnableEurekaClient
@EnableFeignClients
@SpringBootApplication
public class SpringCloudStudyFeignApplication {
public static void main(String[] args) {
SpringApplication.run(SpringCloudStudyFeignApplication.class,args);
System.out.println("http://127.0.0.1:6666/feign/remote/demo/222");
}
}
?
Ribbon配置
全局配置
直接使用ribbon.key=value的方式设置即可,比如:
ribbon.ConnectTime=500
ribbon.ReadTimeout=5000
指定服务配置
使用@FeignClient注解中的name或则Value属性值来设置对应的Ribbon参数,比如:
SPRING-CLOUD-STUDY-DEMO.ribbon.ConnectTime=500
SPRING-CLOUD-STUDY-DEMO.ribbon.ReadTimeout=5000
SPRING-CLOUD-STUDY-DEMO.ribbon.OkToRetryOnAllOperations=true
重试机制
Spring Cloud Feign中默认实现了请求的重试机制(重试次数参数可配置)
需注意:Ribbon的超时与Hystrix的超时是两个概念。为了能让Ribbon超时重试生效,需要让Hystrix的超时时间设置大于Ribbon的超时时间,否则Hystrix超时后直接熔断了,也就没有重试了。
Hystrix配置
全局配置
Hystrix全局配置与Ribbon全局配置一样,直接使用默认前缀hystrix.xxx.xxx.xx即可配置,比如设置超时时间:
hystrix.command.default.execution.isolation.thread.timeoutInMilliseconds=5000
hystrix.command.default.execution.timeout.enabled=false ##来关闭熔断功能。
在 对 Hystrix 进 行 配 置 之 前 , 我 们 需 要 确 认feign.hystrix.enabled参数没有被设置为false,否则该参数设置会关闭Feign客户端的Hystrix支持。
禁用Hystrix
- 通过feign.hystrix.enabled参数配置,全局配置,默认为false。
- 针对某个服务关闭hystrix,需要通过使用@Scope("prototype")注解为指定的客户端配置Feign.Builder实例,详细实现步骤如下所示。
// 构建一个关闭Hystrix的配置类 @Configuration public class DisableHystrixConfiguration { @Bean @Scope("prototype") public Feign.Builder feignBuilder(){ return Feign.builder(); } } // 在HelloService的@FeignClient注解中,通过configuration参数引入上面实现的配置。 @FeignClient(name="SPRING-CLOUD-STUDY-DEMO",configuration=DisableHystrixConfiguration.class) public interface HelloService { ... }
指定命令配置
采用hystrix.command.(commadKey默认为方法名)为前缀来进行配置
服务降级配置
注解@FeignClient包含参数:org.springframework.cloud.openfeign.FeignClient#fallback
fallback参数为实现FeignClient接口实现类class
// FeignClient注解增加fallback参数,配置为当前接口实现类
@FeignClient(name = "SPRING-CLOUD-STUDY-DEMO", fallback = DemoFallback.class)
public interface DemoFeignClient {
@GetMapping("/demo/hello")
String hello();
}
// 实现FeignClient接口,重写降级方法
@Component
public class DemoFallback implements DemoFeignClient{
@Override
public String hello() {
return "fallbcak";
}
}
请求压缩
Spring Cloud Feign支持对请求与响应进行GZIP压缩,以减少通信过程中的性能损耗。我们只需通过下面两个参数设置,就能开启请求与响应的压缩功能:
feign.compression.request.enabled=true
feign.compression.response.enabled=true
指定压缩类型
feign.compression.request.mime.types=text/xml,application/xml,application/json(默认值)
设置请求压缩的大小下限,只有超过这个大小的请求才会对其进行压缩
feign.compression.request.min-request-size=2048(默认值)
工作原理
1、获取feign相关配置信息
我们使用 Feign 的话,会在 Application 的主启动类上,标记 EnableFeignClient 注解,在要调用的接口上标记 FeignClient 注解。 ?在 EnableFeignClients 注解内部,有一个 @Import(FeignClientsRegistrar.class) ,这个类实现了 ImportBeanDefinitionRegistrar 接口,这个的话是 Spring Context 项目下的,所以会在 Spring Boot 项目启动的时候,会调用 FeignClientsRegistrar.registerBeanDefinitions , 扫描 FeiginClient 注解,并设置相关信息,主要实现在org.springframework.cloud.openfeign.FeignClientsRegistrar#registerDefaultConfiguration:
private void registerDefaultConfiguration(AnnotationMetadata metadata,
BeanDefinitionRegistry registry) {
Map<String, Object> defaultAttrs = metadata
.getAnnotationAttributes(EnableFeignClients.class.getName(), true);
if (defaultAttrs != null && defaultAttrs.containsKey("defaultConfiguration")) {
String name;
if (metadata.hasEnclosingClass()) {
name = "default." + metadata.getEnclosingClassName();
}
else {
name = "default." + metadata.getClassName();
}
registerClientConfiguration(registry, name,
defaultAttrs.get("defaultConfiguration"));
}
}
2、扫描FeignClient注解接口
主要实现org.springframework.cloud.openfeign.FeignClientsRegistrar#registerFeignClients:
public void registerFeignClients(AnnotationMetadata metadata,
BeanDefinitionRegistry registry) {
ClassPathScanningCandidateComponentProvider scanner = getScanner();
scanner.setResourceLoader(this.resourceLoader);
Set<String> basePackages;
Map<String, Object> attrs = metadata
.getAnnotationAttributes(EnableFeignClients.class.getName());
AnnotationTypeFilter annotationTypeFilter = new AnnotationTypeFilter(
FeignClient.class);
final Class<?>[] clients = attrs == null ? null
: (Class<?>[]) attrs.get("clients");
if (clients == null || clients.length == 0) {
scanner.addIncludeFilter(annotationTypeFilter);
basePackages = getBasePackages(metadata);
}
else {
final Set<String> clientClasses = new HashSet<>();
basePackages = new HashSet<>();
for (Class<?> clazz : clients) {
basePackages.add(ClassUtils.getPackageName(clazz));
clientClasses.add(clazz.getCanonicalName());
}
AbstractClassTestingTypeFilter filter = new AbstractClassTestingTypeFilter() {
@Override
protected boolean match(ClassMetadata metadata) {
String cleaned = metadata.getClassName().replaceAll("\\$", ".");
return clientClasses.contains(cleaned);
}
};
scanner.addIncludeFilter(
new AllTypeFilter(Arrays.asList(filter, annotationTypeFilter)));
}
for (String basePackage : basePackages) {
Set<BeanDefinition> candidateComponents = scanner
.findCandidateComponents(basePackage);
for (BeanDefinition candidateComponent : candidateComponents) {
if (candidateComponent instanceof AnnotatedBeanDefinition) {
// verify annotated class is an interface
AnnotatedBeanDefinition beanDefinition = (AnnotatedBeanDefinition) candidateComponent;
AnnotationMetadata annotationMetadata = beanDefinition.getMetadata();
Assert.isTrue(annotationMetadata.isInterface(),
"@FeignClient can only be specified on an interface");
Map<String, Object> attributes = annotationMetadata
.getAnnotationAttributes(
FeignClient.class.getCanonicalName());
String name = getClientName(attributes);
registerClientConfiguration(registry, name,
attributes.get("configuration"));
registerFeignClient(registry, annotationMetadata, attributes);
}
}
}
}
最终会调用org.springframework.cloud.openfeign.FeignClientsRegistrar#registerFeignClient方法,主要实现:
private void registerFeignClient(BeanDefinitionRegistry registry,
AnnotationMetadata annotationMetadata, Map<String, Object> attributes) {
String className = annotationMetadata.getClassName();
BeanDefinitionBuilder definition = BeanDefinitionBuilder
.genericBeanDefinition(FeignClientFactoryBean.class);
validate(attributes);
definition.addPropertyValue("url", getUrl(attributes));
definition.addPropertyValue("path", getPath(attributes));
String name = getName(attributes);
definition.addPropertyValue("name", name);
String contextId = getContextId(attributes);
definition.addPropertyValue("contextId", contextId);
definition.addPropertyValue("type", className);
definition.addPropertyValue("decode404", attributes.get("decode404"));
definition.addPropertyValue("fallback", attributes.get("fallback"));
definition.addPropertyValue("fallbackFactory", attributes.get("fallbackFactory"));
definition.setAutowireMode(AbstractBeanDefinition.AUTOWIRE_BY_TYPE);
String alias = contextId + "FeignClient";
AbstractBeanDefinition beanDefinition = definition.getBeanDefinition();
beanDefinition.setAttribute(FactoryBean.OBJECT_TYPE_ATTRIBUTE, className);
// has a default, won't be null
boolean primary = (Boolean) attributes.get("primary");
beanDefinition.setPrimary(primary);
String qualifier = getQualifier(attributes);
if (StringUtils.hasText(qualifier)) {
alias = qualifier;
}
BeanDefinitionHolder holder = new BeanDefinitionHolder(beanDefinition, className,
new String[] { alias });
BeanDefinitionReaderUtils.registerBeanDefinition(holder, registry);
}
registerFeignClient中通过BeanDefinitionBuilder构建FeignClientFactoryBean(构建Feign的核心),将通过@FeginClient 注解获取到的信息,都设置到这个 definition 中,如图:
3、FeignClientFactoryBean.getObject()方法 动态代理的实现入口
<T> T getTarget() {
FeignContext context = applicationContext.getBean(FeignContext.class);
Feign.Builder builder = feign(context);
if (!StringUtils.hasText(url)) {
if (!name.startsWith("http")) {
url = "http://" + name;
}
else {
url = name;
}
url += cleanPath();
return (T) loadBalance(builder, context,
new HardCodedTarget<>(type, name, url));
}
if (StringUtils.hasText(url) && !url.startsWith("http")) {
url = "http://" + url;
}
String url = this.url + cleanPath();
Client client = getOptional(context, Client.class);
if (client != null) {
if (client instanceof LoadBalancerFeignClient) {
// not load balancing because we have a url,
// but ribbon is on the classpath, so unwrap
client = ((LoadBalancerFeignClient) client).getDelegate();
}
if (client instanceof FeignBlockingLoadBalancerClient) {
// not load balancing because we have a url,
// but Spring Cloud LoadBalancer is on the classpath, so unwrap
client = ((FeignBlockingLoadBalancerClient) client).getDelegate();
}
builder.client(client);
}
Targeter targeter = get(context, Targeter.class);
return (T) targeter.target(this, builder, context,
new HardCodedTarget<>(type, name, url));
}
方法这一系列执行后,生成动态代理对象,动态代理对象为每个方法都初始化了SynchronousMethodHandler负责处理方法的请求,然后将动态代理对象放入到Spring容器中,当执行Controller执行时候,其实执行的是InvacationHandler的invoke()方法。
在创建SynchronousMethodHandler.Factory时候,发现是与LoadBalancerFeignClient结合
调用动态代理invoke方法时候,根据构造的Map<Method, MethodHandler>找到对应的handler对象,最终调用com.netflix.client.AbstractLoadBalancerAwareClient#executeWithLoadBalancer(S, com.netflix.client.config.IClientConfig)方法(Ribbon的实现):
public T executeWithLoadBalancer(final S request, final IClientConfig requestConfig) throws ClientException {
LoadBalancerCommand<T> command = buildLoadBalancerCommand(request, requestConfig);
try {
return command.submit(
new ServerOperation<T>() {
@Override
public Observable<T> call(Server server) {
URI finalUri = reconstructURIWithServer(server, request.getUri());
S requestForServer = (S) request.replaceUri(finalUri);
try {
return Observable.just(AbstractLoadBalancerAwareClient.this.execute(requestForServer, requestConfig));
}
catch (Exception e) {
return Observable.error(e);
}
}
})
.toBlocking()
.single();
} catch (Exception e) {
Throwable t = e.getCause();
if (t instanceof ClientException) {
throw (ClientException) t;
} else {
throw new ClientException(e);
}
}
}
到这里其实就是Ribbon的实现了。
参考资料:
《Spring Cloud微服务实战》
本文来自互联网用户投稿,该文观点仅代表作者本人,不代表本站立场。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。 如若内容造成侵权/违法违规/事实不符,请联系我的编程经验分享网邮箱:veading@qq.com进行投诉反馈,一经查实,立即删除!