用keepalived做mysql高可用
2023-12-13 03:50:55
两台机器(centos7系统)安装mysql
[root@mysql-keep-master ~]# wget https://dev.mysql.com/get/mysql80-community-release-el7-3.noarch.rpm
[root@mysql-keep-master ~]# rpm -ivh mysql80-community-release-el7-3.noarch.rpm
[root@mysql-keep-master ~]# yum -y install yum-utils #安装yum工具包
[root@mysql-keep-master ~]# vim /etc/yum.repos.d/mysql-community.repo
安装mysql
[root@mysql-keep-master ~]# yum install -y mysql-community-server
[root@mysql-keep-master ~]# systemctl start mysqld
[root@mysql-keep-master ~]# systemctl enable mysqld
修改密码
[root@mysql-keep-master ~]# grep pass /var/log/mysqld.log
2020-02-18T13:54:25.706635Z 1 [Note] A temporary password is generated for root@localhost: %baWi=4!NsT)
[root@mysql-keep-master ~]# mysqladmin -uroot -p'%baWi=4!NsT)' password 'Admin@123!'
制作互为主从:
[root@mysql-keep-master ~]# vim /etc/my.cnf #编辑配置文件开启gtid
log-bin=m1.log
server-id=1
gtid_mode = ON #开启gtid
enforce_gtid_consistency=1 #强制gtid移植性
[root@mysql-keep-master ~]# systemctl restart mysqld
[root@mysql-keep-master ~]# mysql -uroot -p'Admin@123!' #登录数据库
mysql> GRANT ALL ON *.* TO 'root'@'%' IDENTIFIED BY 'Admin@123'; #创建远程登录用户
mysql> flush privileges;
mysql> grant replication slave,reload,super on *.* to 'slave'@'%' identified by 'Admin@123'; ---创建主从授权用户
mysql> flush privileges; #刷新授权
mysql> \e #指定主服务器信息
CHANGE MASTER TO
MASTER_HOST='192.168.58.136', #指定主服务器的ip或者主机名
MASTER_USER='slave', #授权用户
MASTER_PASSWORD='QianFeng@123', #授权用户密码
master_auto_position=1
-> ;
启动slave
mysql> start slave;
修改配置文件
[root@mysql-keep-backup ~]# vim /etc/my.cnf
log-bin=m2.log
server-id=2
gtid_mode = ON
enforce_gtid_consistency=1
[root@mysql-keep-backup ~]# systemctl restart mysqld
[root@mysql-keep-backup ~]# mysql -uroot -p'QianFeng@123!'
mysql> GRANT ALL ON *.* TO 'root'@'%' IDENTIFIED BY 'QianFeng@123';
mysql> flush privileges;
mysql> grant replication slave,reload,super on *.* to 'slave'@'%' identified by 'QianFeng@123';
mysql> flush privileges;
指定主服务器信息
mysql> \e
CHANGE MASTER TO
MASTER_HOST='192.168.58.135',
MASTER_USER='slave',
MASTER_PASSWORD='QianFeng@123',
master_auto_position=1
-> ;
启动slave
mysql> start slave;
两台机器验证是否为yes
mysql> show slave status\G
两台机器安装keepalived
[root@mysql-keep-master ~]# yum -y install keepalived
[root@mysql-keep-master ~]# cp /etc/keepalived/keepalived.conf /etc/keepalived/keepalived.conf.bak
[root@mysql-keep-master ~]# vim /etc/keepalived/keepalived.conf
! Configuration File for keepalived
global_defs {
router_id master1
}
vrrp_instance VI_1 {
state MASTER
interface ens33
virtual_router_id 80
priority 100
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.58.16/24
}
}
将配置文件拷贝到backu机器
[root@mysql-keep-backup ~]# mv /etc/keepalived/keepalived.conf /etc/keepalived/keepalived.conf.bak
[root@mysql-keep-master ~]# scp /etc/keepalived/keepalived.conf 192.168.58.136:/etc/keepalived/
[root@mysql-keep-backup ~]# vim /etc/keepalived/keepalived.conf #修改如下
! Configuration File for keepalived
global_defs {
router_id backup1
}
vrrp_instance VI_1 {
state BACKUP
interface ens33
virtual_router_id 80
priority 50
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.58.16/24
}
}
两台机器启动keepalived
[root@mysql-keep-master ~]# systemctl start keepalived
[root@mysql-keep-backup ~]# systemctl start keepalived
[root@mysql-keep-master ~]# ip a #vip在master上面
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:92:0a:64 brd ff:ff:ff:ff:ff:ff
inet 192.168.58.135/24 brd 192.168.58.255 scope global dynamic ens33
valid_lft 1729sec preferred_lft 1729sec
inet 192.168.58.16/24 scope global secondary ens33
valid_lft forever preferred_lft forever
inet6 fe80::86f4:1d74:ad05:c61c/64 scope link
valid_lft forever preferred_lft forever
测试:
[root@mysql-keep-master ~]# mysql -uroot -p'Admin@123' -h 192.168.58.16 #登录vip
mysql> create database test1;
Query OK, 1 row affected (0.07 sec)
mysql> show databases;
+--------------------+
| Database |
+--------------------+
| information_schema |
| mysql |
| performance_schema |
| sys |
| test1 |
+--------------------+
5 rows in set (0.08 sec)
验证
[root@mysql-keep-backup ~]# mysql -uroot -p'Admin@123!'
mysql> show databases;
+--------------------+
| Database |
+--------------------+
| information_schema |
| mysql |
| performance_schema |
| sys |
| test1 |
+--------------------+
5 rows in set (0.12 sec)
[root@mysql-keep-master ~]# systemctl stop keepalived #关闭master
[root@mysql-keep-backup ~]# ip a #vip切换backup机器
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:a2:0f:5c brd ff:ff:ff:ff:ff:ff
inet 192.168.58.136/24 brd 192.168.58.255 scope global dynamic ens33
valid_lft 1547sec preferred_lft 1547sec
inet 192.168.58.16/24 scope global secondary ens33
valid_lft forever preferred_lft forever
inet6 fe80::af6e:2eff:e2d1:99cb/64 scope link
valid_lft forever preferred_lft forever
测试登录
[root@mysql-keep-master ~]# mysql -uroot -p'Admin@123' -h 192.168.58.16
文章来源:https://blog.csdn.net/xubaodong_1/article/details/134869482
本文来自互联网用户投稿,该文观点仅代表作者本人,不代表本站立场。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。 如若内容造成侵权/违法违规/事实不符,请联系我的编程经验分享网邮箱:veading@qq.com进行投诉反馈,一经查实,立即删除!
本文来自互联网用户投稿,该文观点仅代表作者本人,不代表本站立场。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。 如若内容造成侵权/违法违规/事实不符,请联系我的编程经验分享网邮箱:veading@qq.com进行投诉反馈,一经查实,立即删除!