计算机图形学头歌合集（题集附解）
2023-12-18 12:20:17
目录
CG1-v1.0-点和直线的绘制?
第1关：OpenGL点的绘制
一. 任务描述
根据下面要求，在右侧修改代码，绘制出预期输出的图片。平台会对你编写的代码进行测试。
1.本关任务
熟悉编程环境； 了解光栅图形显示器的特点； 了解计算机绘图的特点； 进行编程，以OpenGL为开发平台设计程序，以能够在屏幕上生成三个坐标、颜色和尺寸一定的点。
2.预期输出
3.具体要求
(1) 背景色为黑色，用 glClearColor()来完成；
(2) 渲染的点的直径设置为 3；
(3) 选用 GL_POINTS 作为图形类型；
(4) 三个点的颜色分别为（1.0f, 0.0f, 0.0f), (0.0f,1.0f,0.0f), (0.0f,0.0f,1.0f)；
(5) 三个点对应的顶点坐标分别为（-0.4f,-0.4f), (0.0f,0.0f), (0.4f,0.4f)。
// 提示：写完代码请保存之后再进行评测
#include <GL/freeglut.h>
#include<stdio.h>
// 评测代码所用头文件-开始
#include<opencv2/core/core.hpp>
#include<opencv2/highgui/highgui.hpp>
#include<opencv2/imgproc/imgproc.hpp>
// 评测代码所用头文件-结束
void myDisplay(void)
{
// 请在此添加你的代码
/********** Begin ********/
glClearColor(0.0,0.0,0.0,0.0);
glPointSize(3);
glBegin(GL_POINTS);
glColor3f(1.0,0.0,0.0);
glVertex2f(-0.4,-0.4);
glColor3f(0.0,1.0,0.0);
glVertex2f(0.0,0.0);
glColor3f(0.0,0.0,1.0);
glVertex2f(0.4,0.4);
glEnd();
/********** End **********/
glFlush();
}
int main(int argc, char *argv[])
{
glutInit(&argc, argv);
glutInitWindowPosition(100, 100);
glutInitWindowSize(400, 400);
glutCreateWindow("Hello Point!");
glutDisplayFunc(&myDisplay);
glutMainLoopEvent();
/*************以下为评测代码，与本次实验内容无关，请勿修改**************/
GLubyte* pPixelData = (GLubyte*)malloc(400 * 400 * 3);//分配内存
GLint viewport[4] = {0};
glReadBuffer(GL_FRONT);
glPixelStorei(GL_UNPACK_ALIGNMENT, 4);
glGetIntegerv(GL_VIEWPORT, viewport);
glReadPixels(viewport[0], viewport[1], viewport[2], viewport[3], GL_RGB, GL_UNSIGNED_BYTE, pPixelData);
cv::Mat img;
std::vector<cv::Mat> imgPlanes;
img.create(400, 400, CV_8UC3);
cv::split(img, imgPlanes);
for(int i = 0; i < 400; i ++) {
unsigned char* plane0Ptr = imgPlanes[0].ptr<unsigned char>(i);
unsigned char* plane1Ptr = imgPlanes[1].ptr<unsigned char>(i);
unsigned char* plane2Ptr = imgPlanes[2].ptr<unsigned char>(i);
for(int j = 0; j < 400; j ++) {
int k = 3 * (i * 400 + j);
plane2Ptr[j] = pPixelData[k];
plane1Ptr[j] = pPixelData[k+1];
plane0Ptr[j] = pPixelData[k+2];
}
}
cv::merge(imgPlanes, img);
cv::flip(img, img ,0);
cv::namedWindow("openglGrab");
cv::imshow("openglGrab", img);
//cv::waitKey();
cv::imwrite("../img_step1/test.jpg", img);
return 0;
}?第2关：OpenGL简单图形绘制
一.任务描述
根据下面要求，在右侧修改代码，绘制出预期输出的图片。平台会对你编写的代码进行测试。
1.本关任务
利用 OpenGL 作为开发平台设计程序，生成一个光栅图。
2.预期输出
3.具体要求
(1).使用黑色作为背景，采用 glClearColor 来实现；
(2).绘制一个矩形，颜色为(1.0f,1.0f,1.0f)，矩阵位置（-0.5f，-0.5f，0.5f，0.5f)；
(3).绘制一个三角形，三个顶点颜色分别为（1.0f, 0.0f, 0.0f), (0.0f,1.0f,0.0f)， (0.0f,0.0f,1.0f)，对应的顶点坐标分别为(0.0f,1.0f), (0.8f,-0.5f), (-0.8f,-0.5f)；
(4).绘制三个直径为3的点，颜色为（1.0f, 0.0f, 0.0f)， (0.0f,1.0f,0.0f)， (0.0f,0.0f,1.0f)，对应的顶点坐标分别为（-0.4f,-0.4f), (0.0f,0.0f)，(0.4f,0.4f)。
// 提示：写完代码请保存之后再进行评测
#include <GL/freeglut.h>
#include<stdio.h>
// 评测代码所用头文件-开始
#include<opencv2/core/core.hpp>
#include<opencv2/highgui/highgui.hpp>
#include<opencv2/imgproc/imgproc.hpp>
// 评测代码所用头文件-结束
void myDisplay(void)
{
// 请在此添加你的代码
/********** Begin ********/
glClearColor(0.0,0.0,0.0,0.0);
glColor3f(1.0,1.0,1.0);
glRectf(-0.5,-0.5,0.5,0.5);
glBegin(GL_TRIANGLES);
glColor3f(1.0,0.0,0.0);
glVertex2f(0.0,1.0);
glColor3f(0.0,1.0,0.0);
glVertex2f(0.8,-0.5);
glColor3f(0.0,0.0,1.0);
glVertex2f(-0.8,-0.5);
glEnd();
glPointSize(3);
glBegin(GL_POINTS);
glColor3f(1.0,0.0,0.0);
glVertex2f(-0.4,-0.4);
glColor3f(0.0,1.0,0.0);
glVertex2f(0.0,0.0);
glColor3f(0.0,0.0,1.0);
glVertex2f(0.4,0.4);
glEnd();
/********** End **********/
glFlush();
}
int main(int argc, char *argv[])
{
glutInit(&argc, argv);
glutInitWindowPosition(100, 100);
glutInitWindowSize(400, 400);
glutCreateWindow("Hello Point!");
glutDisplayFunc(&myDisplay);
glutMainLoopEvent();
/*************以下为评测代码，与本次实验内容无关，请勿修改**************/
GLubyte* pPixelData = (GLubyte*)malloc(400 * 400 * 3);//分配内存
GLint viewport[4] = {0};
glReadBuffer(GL_FRONT);
glPixelStorei(GL_UNPACK_ALIGNMENT, 4);
glGetIntegerv(GL_VIEWPORT, viewport);
glReadPixels(viewport[0], viewport[1], viewport[2], viewport[3], GL_RGB, GL_UNSIGNED_BYTE, pPixelData);
cv::Mat img;
std::vector<cv::Mat> imgPlanes;
img.create(400, 400, CV_8UC3);
cv::split(img, imgPlanes);
for(int i = 0; i < 400; i ++) {
unsigned char* plane0Ptr = imgPlanes[0].ptr<unsigned char>(i);
unsigned char* plane1Ptr = imgPlanes[1].ptr<unsigned char>(i);
unsigned char* plane2Ptr = imgPlanes[2].ptr<unsigned char>(i);
for(int j = 0; j < 400; j ++) {
int k = 3 * (i * 400 + j);
plane2Ptr[j] = pPixelData[k];
plane1Ptr[j] = pPixelData[k+1];
plane0Ptr[j] = pPixelData[k+2];
}
}
cv::merge(imgPlanes, img);
cv::flip(img, img ,0);
cv::namedWindow("openglGrab");
cv::imshow("openglGrab", img);
//cv::waitKey();
cv::imwrite("../img_step2/test.jpg", img);
return 0;
}?第3关：OpenGL直线绘制
一.任务描述
根据下面要求，在右侧修改代码，绘制出预期输出的图片。平台会对你编写的代码进行测试。
1.本关任务
理解基本图形元素光栅化的基本原理； 了解和使用OpenGL的生成直线的命令，来验证程序运行结果。
2.预期输出
3.具体要求
(1).背景色为黑色，用 glclearcolor 来完成；
(2).绘制一个矩形，颜色为(1.0f,0.0f,0.0f)，矩形位置（25.0，25.0，75.0，75.0)；
(3).绘制一个直径为10的点，颜色为（0.0f, 1.0f, 0.0f)，对应的点坐标为原点；
(4).利用GL_LINES的绘线方式绘制一条线，其中线段的两个顶点颜色分别为(0.0f, 1.0f, 0.0f),(0.0f, 1.0f, 0.0f)两个顶点的坐标分别为(100.0f, 0.0f),(180.0f, 240.0f);
5.调用向glutReshapeFunC注册的函数。
// 提示：写完代码请保存之后再进行评测
#include <GL/freeglut.h>
#include<stdio.h>
// 评测代码所用头文件-开始
#include<opencv2/core/core.hpp>
#include<opencv2/highgui/highgui.hpp>
#include<opencv2/imgproc/imgproc.hpp>
// 评测代码所用头文件-结束
void myDisplay(void)
{
// 请在此添加你的代码
/********** Begin ********/
glClearColor(0.0,0.0,0.0,0.0);
glColor3f(1.0,0.0f,0.0f);
glRectf(25.0,25.0,75.0,75.0);
glPointSize(10);
glBegin(GL_POINTS);
glColor3f(0.0f,1.0f,0.0f);
glVertex2f(0.0f,0.0f);
glEnd();
glBegin(GL_LINES);
glColor3f(0.0f,1.0f,0.0f);
glVertex2f(100.0f,0.0f);
glColor3f(0.0f,1.0f,0.0f);
glVertex2f(180.0f,240.0f);
glEnd();
/********** End **********/
glFlush();
}
void Init()
{
glClearColor(0.0, 0.0, 0.0, 0.0);
glShadeModel(GL_SMOOTH);
}
void myReshape(int w, int h)
{
glViewport(0, 0, (GLsizei)w, (GLsizei)h);
glMatrixMode(GL_PROJECTION);
glLoadIdentity();
gluOrtho2D(0.0, (GLdouble)w, 0.0, (GLdouble)h);
}
int main(int argc, char *argv[])
{
glutInit(&argc, argv);
glutInitWindowPosition(100, 100);
glutInitWindowSize(400, 400);
glutCreateWindow("Hello Point!");
Init();
glutDisplayFunc(myDisplay);
glutReshapeFunc(myReshape);
glutMainLoopEvent();
/*************以下为评测代码，与本次实验内容无关，请勿修改**************/
GLubyte* pPixelData = (GLubyte*)malloc(400 * 400 * 3);//分配内存
GLint viewport[4] = {0};
glReadBuffer(GL_FRONT);
glPixelStorei(GL_UNPACK_ALIGNMENT, 4);
glGetIntegerv(GL_VIEWPORT, viewport);
glReadPixels(viewport[0], viewport[1], viewport[2], viewport[3], GL_RGB, GL_UNSIGNED_BYTE, pPixelData);
cv::Mat img;
std::vector<cv::Mat> imgPlanes;
img.create(400, 400, CV_8UC3);
cv::split(img, imgPlanes);
for(int i = 0; i < 400; i ++) {
unsigned char* plane0Ptr = imgPlanes[0].ptr<unsigned char>(i);
unsigned char* plane1Ptr = imgPlanes[1].ptr<unsigned char>(i);
unsigned char* plane2Ptr = imgPlanes[2].ptr<unsigned char>(i);
for(int j = 0; j < 400; j ++) {
int k = 3 * (i * 400 + j);
plane2Ptr[j] = pPixelData[k];
plane1Ptr[j] = pPixelData[k+1];
plane0Ptr[j] = pPixelData[k+2];
}
}
cv::merge(imgPlanes, img);
cv::flip(img, img ,0);
cv::namedWindow("openglGrab");
cv::imshow("openglGrab", img);
//cv::waitKey();
cv::imwrite("../img_step3/test.jpg", img);
return 0;
}第4关：0<k<1直线绘制-DDA算法
一.任务描述
根据下面要求，在右侧修改代码，绘制出预期输出的图片。平台会对你编写的代码进行测试。
1.本关任务
掌握一种基本图形元素光栅化算法，利用OpenGL实现直线光栅化的DDA算法。
2.预期输出
3.具体要求
(1).背景色为黑色，用 glclearcolor 来完成；
(2).利用DDA算法生成一条直线，线粗为1，直线颜色为(1.0f,1.0f,0.0f),直线两端点坐标为（0，0，200，200）。
// 提示：写完代码请保存之后再进行评测
#include <GL/freeglut.h>
#include<stdio.h>
// 评测代码所用头文件-开始
#include<opencv2/core/core.hpp>
#include<opencv2/highgui/highgui.hpp>
#include<opencv2/imgproc/imgproc.hpp>
// 评测代码所用头文件-结束
void LineDDA(int x0, int y0, int x1, int y1)
{
// 请在此添加你的代码
/********** Begin ********/
int x;
int dy, dx;
int y;
float k;
dx = x1 - x0, dy = y1 - y0;
k = dy / dx;
y = y0;
glColor3f(1.0f, 1.0f, 0.0f);
glPointSize(1);
for (x = x0; x <= x1; x++)
{
glBegin(GL_POINTS);
glVertex2i(x, (int)(y + 0.5));
glEnd();
y += k;
}
/********** End **********/
glFlush();
}
void myDisplay(void)
{
// 请在此添加你的代码
/********** Begin ********/
glClearColor(0.0, 0.0, 0.0, 0.0);
LineDDA( 0, 0, 200, 200);
/********** End **********/
glFlush();
}
void Init()
{
glClearColor(0.0, 0.0, 0.0, 0.0);
glShadeModel(GL_SMOOTH);
}
void myReshape(int w, int h)
{
glViewport(0, 0, (GLsizei)w, (GLsizei)h);
glMatrixMode(GL_PROJECTION);
glLoadIdentity();
gluOrtho2D(0.0, (GLdouble)w, 0.0, (GLdouble)h);
}
int main(int argc, char *argv[])
{
glutInit(&argc, argv);
glutInitWindowPosition(100, 100);
glutInitWindowSize(400, 400);
glutCreateWindow("Hello Point!");
Init();
glutDisplayFunc(myDisplay);
glutReshapeFunc(myReshape);
glutMainLoopEvent();
/*************以下为评测代码，与本次实验内容无关，请勿修改**************/
GLubyte* pPixelData = (GLubyte*)malloc(400 * 400 * 3);//分配内存
GLint viewport[4] = {0};
glReadBuffer(GL_FRONT);
glPixelStorei(GL_UNPACK_ALIGNMENT, 4);
glGetIntegerv(GL_VIEWPORT, viewport);
glReadPixels(viewport[0], viewport[1], viewport[2], viewport[3], GL_RGB, GL_UNSIGNED_BYTE, pPixelData);
cv::Mat img;
std::vector<cv::Mat> imgPlanes;
img.create(400, 400, CV_8UC3);
cv::split(img, imgPlanes);
for(int i = 0; i < 400; i ++) {
unsigned char* plane0Ptr = imgPlanes[0].ptr<unsigned char>(i);
unsigned char* plane1Ptr = imgPlanes[1].ptr<unsigned char>(i);
unsigned char* plane2Ptr = imgPlanes[2].ptr<unsigned char>(i);
for(int j = 0; j < 400; j ++) {
int k = 3 * (i * 400 + j);
plane2Ptr[j] = pPixelData[k];
plane1Ptr[j] = pPixelData[k+1];
plane0Ptr[j] = pPixelData[k+2];
}
}
cv::merge(imgPlanes, img);
cv::flip(img, img ,0);
cv::namedWindow("openglGrab");
cv::imshow("openglGrab", img);
//cv::waitKey();
cv::imwrite("../img_step4/test.jpg", img);
return 0;
}?第5关：0<k<1直线绘制-中点算法
一.任务描述
根据下面要求，在右侧修改代码，绘制出预期输出的图片。平台会对你编写的代码进行测试。
1.本关任务
掌握一种基本图形元素光栅化算法，利用OpenGL实现直线光栅化的中点画线算法。
2.预期输出
3.具体要求
(1).背景色为黑色，用 glclearcolor 来完成；
(2).利用中点画线算法生成一条直线，线粗为1，直线颜色为(0.0f,1.0f,0.0f),直线两端点坐标为（10，50，300，260）。
// 提示：写完代码请保存之后再进行评测
#include <GL/freeglut.h>
#include<stdio.h>
// 评测代码所用头文件-开始
#include<opencv2/core/core.hpp>
#include<opencv2/highgui/highgui.hpp>
#include<opencv2/imgproc/imgproc.hpp>
// 评测代码所用头文件-结束
void MidPLine(int x0, int y0, int x1, int y1)
{
// 请在此添加你的代码
/********** Begin ********/
int dx, dy, dt, db, d, x, y;
dx = x1- x0;
dy = y1 - y0;
d = dx - 2*dy;
dt = 2*dx - 2*dy;
db = -2*dy;
x = x0; y = y0;
glColor3f(0.0f, 1.0f, 0.0f);
glPointSize(1);
glBegin(GL_POINTS);
glVertex2i(x, y);
glEnd();
while (x < x1)
{
if (d < 0)
{
x++;
y++;
d += dt;
}
else
{
x++;
d += db;
}
glBegin(GL_POINTS);
glVertex2i(x, y);
glEnd();
}
/********** End **********/
glFlush();
}
void myDisplay(void)
{
// 请在此添加你的代码
/********** Begin ********/
glClear(GL_COLOR_BUFFER_BIT);
MidPLine(10,50,300,260);
/********** End **********/
glFlush();
}
void Init()
{
glClearColor(0.0, 0.0, 0.0, 0.0);
glShadeModel(GL_SMOOTH);
}
void myReshape(int w, int h)
{
glViewport(0, 0, (GLsizei)w, (GLsizei)h);
glMatrixMode(GL_PROJECTION);
glLoadIdentity();
gluOrtho2D(0.0, (GLdouble)w, 0.0, (GLdouble)h);
}
int main(int argc, char *argv[])
{
glutInit(&argc, argv);
glutInitWindowPosition(100, 100);
glutInitWindowSize(400, 400);
glutCreateWindow("Hello Point!");
Init();
glutDisplayFunc(myDisplay);
glutReshapeFunc(myReshape);
glutMainLoopEvent();
/*************以下为评测代码，与本次实验内容无关，请勿修改**************/
GLubyte* pPixelData = (GLubyte*)malloc(400 * 400 * 3);//分配内存
GLint viewport[4] = {0};
glReadBuffer(GL_FRONT);
glPixelStorei(GL_UNPACK_ALIGNMENT, 4);
glGetIntegerv(GL_VIEWPORT, viewport);
glReadPixels(viewport[0], viewport[1], viewport[2], viewport[3], GL_RGB, GL_UNSIGNED_BYTE, pPixelData);
cv::Mat img;
std::vector<cv::Mat> imgPlanes;
img.create(400, 400, CV_8UC3);
cv::split(img, imgPlanes);
for(int i = 0; i < 400; i ++) {
unsigned char* plane0Ptr = imgPlanes[0].ptr<unsigned char>(i);
unsigned char* plane1Ptr = imgPlanes[1].ptr<unsigned char>(i);
unsigned char* plane2Ptr = imgPlanes[2].ptr<unsigned char>(i);
for(int j = 0; j < 400; j ++) {
int k = 3 * (i * 400 + j);
plane2Ptr[j] = pPixelData[k];
plane1Ptr[j] = pPixelData[k+1];
plane0Ptr[j] = pPixelData[k+2];
}
}
cv::merge(imgPlanes, img);
cv::flip(img, img ,0);
cv::namedWindow("openglGrab");
cv::imshow("openglGrab", img);
//cv::waitKey();//
cv::imwrite("../img_step5/test.jpg", img);
return 0;
}?第6关：一般直线绘制
一.任务描述
1.本关任务
在前面关卡的基础上，根据下面具体要求，利用OpenGL画点函数来实现一般直线（所有斜率情况）的绘制算法。
2.预期输出
3.具体要求
根据下面要求，在右侧修改代码，绘制出预期输出的图片，并进行评测。
(1) 直线颜色为红色(1.0f,0.0f,0.0f), 线粗为1；
(2) 实现一般直线（所有斜率情况）的绘制算法，并将代码填写在函数void Line(int x0, int y0, int x1, int y1)中；
(3) 绘制一个五角星来测试上述直线绘制算法，并将代码填写在函数void myDisplay(void)中指定位置。五角星的顶点坐标分别为：(261, 215), (344, 275),(429, 213), (398, 319), (477, 384), (378, 385), (344, 491), (310, 384), (209, 382), (292, 319).?
// 提示：写完代码请保存之后再进行评测
#include <GL/freeglut.h>
#include <algorithm>
#include <stdio.h>
using namespace std;
// 评测代码所用头文件-开始
#include <opencv2/core/core.hpp>
#include <opencv2/highgui/highgui.hpp>
#include <opencv2/imgproc/imgproc.hpp>
// 评测代码所用头文件-结束
void Line(int x0, int y0, int x1, int y1)
{
// 请在此添加你的代码
/********** Begin ********/
glColor3f(1.0f, 0.0f, 0.0f);
glBegin(GL_POINTS);
glPointSize(1);
int dx = abs(x1 - x0);
int dy = abs(y1 - y0);
if (dx > dy) // x方向为步进方向
{
if (x0 > x1) //确保x0<x1，这样循环中x=x+1
{
swap(x0, x1);
swap(y0, y1);
}
int d = dx - 2 * dy;
int d1 = 2 * dx - 2 * dy;
int d2 = -2 * dy;
int x = x0;
int y = y0;
int yIncr = (y1 > y0) ? 1 : -1; // 比较两端点y值大小决定y的增量值
glVertex2i(x, y);
for (int x = x0 + 1; x <= x1; x++)
{
if (d < 0)
{
y = y + yIncr;
d = d + d1;
}
else
d = d + d2;
glVertex2i(x, y);
}
}
else
{
if (y0 > y1)
{
swap(x0, x1);
swap(y0, y1);
}
int d = dy - 2 * dx;
int d1 = 2 * dy - 2 * dx;
int d2 = -2 * dx;
int x = x0;
int y = y0;
int xIncr = (x1 > x0) ? 1 : -1;
glVertex2i(x, y);
for (int y = y0 + 1; y <= y1; y++)
{
if (d < 0)
{
x = x + xIncr;
d = d + d1;
}
else
d = d + d2;
glVertex2i(x, y);
}
}
glEnd();
/********** End **********/
}
void myDisplay(void)
{
glClear(GL_COLOR_BUFFER_BIT);
// 请在此添加你的代码用来测试直线绘制代码
/********** Begin ********/
Line(261, 215, 344, 275);
Line(344, 275, 429, 213);
Line(429, 213, 398, 319);
Line(398, 319, 477, 384);
Line(477, 384, 378, 385);
Line(378, 385, 344, 491);
Line(344, 491, 310, 384);
Line(310, 384, 209, 382);
Line(209, 382, 292, 319);
Line(292, 319, 261, 215);
/********** End **********/
glFlush();
}
void Init()
{
glClearColor(0.0, 0.0, 0.0, 0.0);
glShadeModel(GL_SMOOTH);
}
void myReshape(int w, int h)
{
glViewport(0, 0, (GLsizei)w, (GLsizei)h);
glMatrixMode(GL_PROJECTION);
glLoadIdentity();
gluOrtho2D(0.0, (GLdouble)w, 0.0, (GLdouble)h);
}
int main(int argc, char *argv[])
{
int width = 800;
int height = 600;
glutInit(&argc, argv);
glutInitWindowPosition(100, 100);
glutInitWindowSize(width, height);
glutCreateWindow("Hello Line!");
Init();
glutDisplayFunc(myDisplay);
glutReshapeFunc(myReshape);
glutMainLoopEvent();
/*************以下为评测代码，与本次实验内容无关，请勿修改**************/
GLubyte* pPixelData = (GLubyte*)malloc(width * height * 3);//分配内存
GLint viewport[4] = {0};
glReadBuffer(GL_FRONT);
glPixelStorei(GL_UNPACK_ALIGNMENT, 4);
glGetIntegerv(GL_VIEWPORT, viewport);
glReadPixels(viewport[0], viewport[1], viewport[2], viewport[3], GL_RGB, GL_UNSIGNED_BYTE, pPixelData);
cv::Mat img;
std::vector<cv::Mat> imgPlanes;
img.create(height, width, CV_8UC3);
cv::split(img, imgPlanes);
for(int i = 0; i < height; i ++) {
unsigned char* plane0Ptr = imgPlanes[0].ptr<unsigned char>(i);
unsigned char* plane1Ptr = imgPlanes[1].ptr<unsigned char>(i);
unsigned char* plane2Ptr = imgPlanes[2].ptr<unsigned char>(i);
for(int j = 0; j < width; j ++) {
int k = 3 * (i * width + j);
plane2Ptr[j] = pPixelData[k];
plane1Ptr[j] = pPixelData[k+1];
plane0Ptr[j] = pPixelData[k+2];
}
}
cv::merge(imgPlanes, img);
cv::flip(img, img ,0);
cv::namedWindow("openglGrab");
cv::imshow("openglGrab", img);
//cv::waitKey();//
cv::imwrite("../img_step6/test.jpg", img);
return 0;
}CG1-v2.0-直线绘制
第1关：直线光栅化-DDA画线算法
一.任务描述
1.本关任务
(1)根据直线DDA算法补全line函数，其中直线斜率0<k<1； (2)当直线方程恰好经过P(x,y)和T(x,y+1)的中点M时，统一选取直线上方的T点为显示的像素点。
2.输入
(1)直线两端点坐标:(13, 20)和(180,140); (2)直线颜色为白色。
3.输出
程序运行结果为一条直线，具体结果如下图所示：
二.相关知识
1.绘制点函数
image.set(x, y, color)函数是绘制点的函数,参数包括x、y和color。参数x为绘制点的x坐标，参数y为绘制点的y坐标，参数color为绘制点的颜色。
2.DDA算法
DDA算法相关知识点，请参考教材与课件或有关资料。
三.操作说明
(1)按要求补全line函数；
(2)点击窗口右下角"测评"按钮，等待测评结果，如果通过后可进行下一关任务。
#include "tgaimage.h"
const TGAColor white = TGAColor(255, 255, 255, 255);
const TGAColor red = TGAColor(255, 0, 0, 255);
void line(int x0, int y0, int x1, int y1, TGAImage &image, TGAColor color)
{
// Please add the code here
/********** Begin ********/
int x;
float y, k;
k = (float)(y1 - y0) / (float)(x1 - x0);
y = y0;
for (x = x0;x <= x1;x++)
{
image.set(x, int(y + 0.5f),color);
y = y + k;
}
/********** End *********/
}
int main(int argc, char** argv)
{
TGAImage image(640,480, TGAImage::RGB);
line(13, 20, 180, 140, image, white);
image.flip_vertically(); // i want to have the origin at the left bottom corner of the image
image.write_tga_file("../img_step1/test.tga");
return 0;
}第2关：直线光栅化-中点画线算法?
一.任务描述
1.本关任务
(1)根据直线中点画线算法补全line函数，其中直线斜率0<k<1，并将main函数中的line函数参数补充完整; (2)当直线方程恰好经过P(x,y)和T(x,y+1)的中点M时，统一选取直线上方的T点为显示的像素点。
2.输入
(1)直线两端点坐标:(100, 100)和(520,300); (2)直线颜色为红色。
3.输出
程序运行结果为一条直线，具体结果如下图所示：
二.相关知识
1.绘制点函数
image.set(x, y, color)函数是绘制点的函数,参数包括x、y和color。参数x为绘制点的x坐标，参数y为绘制点的y坐标，参数color为绘制点的颜色。
2.中点画线算法
中点画线算法相关知识点，请参考教材与课件或有关资料。
三.操作说明
(1)按要求补全line函数；
(2)点击窗口右下角"测评"按钮，等待测评结果，如果通过后可进行下一关任务。
#include "tgaimage.h"
const TGAColor white = TGAColor(255, 255, 255, 255);
const TGAColor red = TGAColor(255, 0, 0, 255);
void line(int x0, int y0, int x1, int y1, TGAImage &image, TGAColor color)
{
// Please add the code here
/********** Begin ********/
int dx,dy,dt,db,d,x,y;
dx = x1 - x0;
dy = y1 - y0;
d = dx - 2*dy;
dt = 2*dx - 2*dy;
db = -2*dy;
x = x0;
y = y0;
image.set(x,y,color);
while (x < x1)
{
if (d <= 0)
{ x++;
y++;
d += dt;
}
else
{
x++;
d += db;
}
image.set(x,y,color);
}
/********** End *********/
}
int main(int argc, char** argv)
{
TGAImage image(640,480, TGAImage::RGB);
// Please add the code here
/********** Begin ********/
line( 100, 100 , 520 , 300 , image, red );
/********** End *********/
image.flip_vertically(); // i want to have the origin at the left bottom corner of the image
image.write_tga_file("../img_step4/test.tga");
return 0;
}第3关：直线光栅化-Bresenham画线算法
一.任务描述
1.本关任务
(1)根据直线Bresenham算法补全line函数，其中直线斜率0<k<1，并将main函数中的line函数参数补充完整; (2)当直线方程恰好经过P(x,y)和T(x,y+1)的中点M时，统一选取直线上方的T点为显示的像素点。
2.输入
(1)直线两端点坐标:(20, 20)和(180,140); (2)直线颜色为白色。
3.输出
程序运行结果为一条直线，具体结果如下图所示：
二.相关知识
1.绘制点函数
image.set(x, y, color)函数是绘制点的函数,参数包括x、y和color。参数x为绘制点的x坐标，参数y为绘制点的y坐标，参数color为绘制点的颜色。
2.Bresenham算法
Bresenham算法相关知识点，请参考教材与课件或有关资料。
三.操作说明
(1)按要求补全line函数；
(2)点击窗口右下角"测评"按钮，等待测评结果，如果通过后可进行下一关任务。
#include "tgaimage.h"
const TGAColor white = TGAColor(255, 255, 255, 255);
const TGAColor red = TGAColor(255, 0, 0, 255);
void line(int x0, int y0, int x1, int y1, TGAImage &image, TGAColor color)
{
// Please add the code here
/********** Begin ********/
int Dx=x1-x0,Dy=y1-y0,y=y0,D=-Dx;
for(int x = x0;x <=x1;x++)
{
image.set(x,y,color);
D = D + 2*Dy;
if(D >= 0)
{
y++;
D = D - 2*Dx;
}
}
/********** End *********/
}
int main(int argc, char** argv)
{
TGAImage image(640,480, TGAImage::RGB);
// Please add the code here
/********** Begin ********/
line( 20, 20 , 180 , 140 , image, white);
/********** End *********/
image.flip_vertically(); // i want to have the origin at the left bottom corner of the image
image.write_tga_file("../img_step2/test.tga");
return 0;
}第4关：直线光栅化-任意斜率的Bresenham画线算法
一.任务描述
1.本关任务
(1)根据直线Bresenham算法补全line函数以绘制白色直线，其中直线斜率为任意情况。 (2)当直线方程恰好经过P(x,y)和T(x,y+1)的中点M时，统一选取直线上方的T点为显示的像素点。
2.输入
代码将自动输入一个OBJ三维人头模型，具体模型如下图：
3.输出
若编写的任意斜率的Bresenham画线算法代码正确，则程序会将模型转换为线条图片，具体结果如下图所示：
二.相关知识
1.绘制点函数
image.set(x, y, color)函数是绘制点的函数,参数包括x、y和color。参数x为绘制点的x坐标，参数y为绘制点的y坐标，参数color为绘制点的颜色。
2.Bresenham算法
Bresenham算法相关知识点，请参考教材与课件或有关资料。
三.操作说明
(1)按要求补全line函数；
(2)点击窗口右下角"测评"按钮，等待测评结果，如果通过后可进行下一关任务。
CG2-v2.0-三角形填充
第1关：扫描线填充法
一. 任务描述
1. 本关任务
了解和掌握扫描线填充法，实现对三角形区域进行填充，具体要求如下： (1) 补全triangle函数; (2) 将main函数中的三角形顶点坐标和triangle函数参数补充完整。
2. 输入
(1) 三角形的三个顶点的坐标:
t0 = {125,50}， t1 = {300,200}， t2 ={200,350};
(2) 三角形区域为蓝色。3. 输出
程序运行结果为一个蓝色三角形区域，如下图所示：
#include "pngimage.h"
#include<stdio.h>
#include <iostream>
struct Vec2i
{
int x, y;
};
void triangle(Vec2i t0, Vec2i t1, Vec2i t2, PNGImage& image, PNGColor color) {
// Please add your code here
/********** Begin ********/
if (t0.y>t1.y) std::swap(t0, t1);
if (t0.y>t2.y) std::swap(t0, t2);
if (t1.y>t2.y) std::swap(t1, t2);
int total_height = t2.y-t0.y;
for (int y=t0.y; y<=t1.y; y++) {
int segment_height = t1.y-t0.y+1; //be careful with divisions by zero
float alpha = (float)(y-t0.y)/total_height,beta = (float)(y-t0.y)/segment_height;
Vec2i A,B;
A.y=B.y=y;
A.x = t0.x + (t2.x-t0.x)*alpha;
B.x = t0.x + (t1.x-t0.x)*beta;
if (A.x>B.x) std::swap(A.x, B.x);
for (int x=A.x; x<=B.x; x++) {
image.set(x, y, color);
}
}
for (int y = t1.y; y <= t2.y; y++)
{
int segment_height = t2.y-t1.y+1;
float alpha2=(float)(y-t0.y)/total_height,beta2 =(float)(y-t1.y)/segment_height;
Vec2i A2,B2;
A2.y=B2.y=y;
A2.x = t0.x + (t2.x-t0.x)*alpha2;
B2.x = t1.x - (t1.x-t2.x)*beta2;
if (A2.x>B2.x) std::swap(A2.x, B2.x);
for (int x=A2.x; x<=B2.x; x++) {
image.set(x, y, color);
}
}
}
/********** End **********/
int main(int argc, char** argv) {
PNGColor white = PNGColor(255, 255, 255, 255);
PNGColor black = PNGColor(0, 0, 0, 255);
PNGColor red = PNGColor(255, 0, 0, 255);
PNGColor blue = PNGColor(0, 255, 255, 255);
int width = 400;
int height = 400;
PNGImage image(width, height, PNGImage::RGBA); //Error when RGB because lodepng_get_raw_size_lct(w, h, colortype, bitdepth) > in.size() in encode
image.init(black);
// Please add your code here
/********** Begin ********/
Vec2i t0 = {125 ,50 }, t1 = {300 , 200}, t2 = {200 ,350 };
triangle( t0,t1 ,t2, image,PNGColor(0, 255, 255, 255) );
/********** End **********/
image.flip_vertically(); // i want to have the origin at the left bottom corner of the image
image.write_png_file("../img_step3/test.png");
return 0;
}?第2关：重心坐标填充法
一. 任务描述
1. 本关任务
了解和掌握重心坐标法，以便能够对三角形区域进行填充，具体要求如下： (1) 补全Triangle和Barycenter函数; (2) 将main函数中的三角形顶点坐标和Triangle函数参数补充完整。
2. 输入
(1) 三角形的三个顶点的坐标:
t0 = {50,50}， t1 = {300,200}， t2 ={200,350};
(2) 三角形颜色区域为绿色。3. 输出
程序运行结果为一个绿色三角形区域，如下图所示：
#include "pngimage.h"
#include<stdio.h>
#include <iostream>
#include <cmath>
#include <algorithm>
#include <stdlib.h>
struct Vec2i
{
int x, y;
};
struct Vec3f
{
float x, y, z;
};
//cross Product
Vec3f cross(const Vec3f& v1, const Vec3f& v2)
{
Vec3f v3;
v3.x = v1.y * v2.z - v1.z * v2.y;
v3.y = v1.z * v2.x - v1.x * v2.z;
v3.z = v1.x * v2.y - v1.y * v2.x;
return v3;
}
//Determine the point p coordinates are in the triangle abc
Vec3f Barycentre(Vec2i p, Vec2i a, Vec2i b, Vec2i c)
{
// Please add your code here
/********** Begin ********/
Vec3f s[2];
s[0].x = c.x-a.x;
s[0].y = b.x-a.x;
s[0].z = a.x-p.x;
s[1].x = c.y-a.y;
s[1].y = b.y-a.y;
s[1].z = a.y-p.y;
Vec3f u = cross(s[0], s[1]);
Vec3f v;
if (abs(u.z) > 1e-2)
{
v.x = 1.0-(u.x+u.y)/u.z;
v.y = u.y/u.z;
v.z = u.x/u.z;
}
else
{
v.x = -1;
v.y = 1;
v.z = 1;
}
return v;
/********** End ********/
}
// Please draw point to make a triangle in bounding box
void Triangle(Vec2i t0, Vec2i t1, Vec2i t2, PNGImage& image, PNGColor color)
{
// Please add your code here
/********** Begin ********/
int xmax,ymax,x,y;
xmax=400,ymax=400;
Vec2i A;
Vec3f v;
for(x=0;x<=xmax;x++)
{
for(y=0;y<=ymax;y++)
{
A.x=x;
A.y=y;
v=Barycentre(A, t0, t1, t2);
if(v.x>=0&&v.y>=0&&v.z>=0)
{
image.set(x,y,color);
}
}
}
}
/********** End **********/
int main(int argc, char** argv) {
PNGColor white = PNGColor(255, 255, 255, 255);
PNGColor black = PNGColor(0, 0, 0, 255);
PNGColor red = PNGColor(255, 0, 0, 255);
PNGColor green = PNGColor(0, 255, 0, 255);
PNGColor blue = PNGColor(0, 255, 255, 255);
int width = 400;
int height = 400;
PNGImage image(width, height, PNGImage::RGBA); //Error when RGB because lodepng_get_raw_size_lct(w, h, colortype, bitdepth) > in.size() in encode
image.init(black);
// Please add your code here
/********** Begin ********/
Vec2i t0={50,50},t1={300,200 },t2={200,350};
Triangle(t0,t1,t2,image, PNGColor(0,255,0,255));
/********** End **********/
image.flip_vertically(); // i want to have the origin at the left bottom corner of the image
image.write_png_file("../img_step2/test.png");
return 0;
}
?第3关：同侧判断填充法
一. 任务描述
1. 本关任务
了解和掌握同侧判断算法，以便能够对三角形区域进行填充，具体要求如下： (1) 并补全Triangle、SameSide和PointInTriangle函数; (2) 将main函数中的三角形顶点坐标和Triangle函数参数补充完整。
2. 输入
(1) 三角形的三个顶点的坐标:
t0 = {50,50}， t1 = {300,200}， t2 ={200,350};
(2) 三角形区域为红色。3. 输出
程序运行结果为一个红色三角形区域，如下图所示：
#include "pngimage.h"
#include<stdio.h>
#include <iostream>
#include <algorithm>
using namespace std;
struct Vec2i
{
int x, y;
};
//Cross product
float CrossProduct(Vec2i a,Vec2i b)
{
return a.x * b.y - b.x * a.y;
}
//DotProduct
float DotProduct(float cp1,float cp2)
{
return cp1*cp2;
}
//Determine if P1 and P2 are on the same side
bool SameSide( Vec2i p,Vec2i a, Vec2i b, Vec2i c )
{
// Please add your code here
/********** Begin ********/
Vec2i AB = {b.x - a.x, b.y - a.y};
Vec2i AC = {c.x - a.x, c.y - a.y};
Vec2i AP = {p.x - a.x, p.y - a.y};
float v1 = CrossProduct(AB, AC);
float v2 = CrossProduct(AB, AP);
if (DotProduct(v1, v2) >= 0)
return 1;
else return 0;
/********** End **********/
}
//Determine the point coordinates are in the triangle
float PointInTriangle(Vec2i p,Vec2i a, Vec2i b, Vec2i c)
{
// Please add your code here
/********** Begin ********/
return SameSide(a, b, c, p) && SameSide(b, c, a, p) && SameSide(c, a, b, p);
/********** End **********/
}
// Please draw point in bounding box
void Triangle(Vec2i t0, Vec2i t1, Vec2i t2, PNGImage& image, PNGColor color)
{
// Please add your code here
/********** Begin ********/
int xmax,ymax,x,y;
Vec2i A;
xmax=300,ymax=350;
for(x=0;x<=xmax;x++)
{
for(y=0;y<=ymax;y++)
{
A.x=x;
A.y=y;
if(PointInTriangle(A,t0,t1 ,t2 ))
image.set(x,y,color);
}
}
/********** End **********/
}
int main(int argc, char** argv) {
PNGColor white = PNGColor(255, 255, 255, 255);
PNGColor black = PNGColor(0, 0, 0, 255);
PNGColor red = PNGColor(255, 0, 0, 255);
PNGColor green = PNGColor(0, 255, 0, 255);
PNGColor blue = PNGColor(0, 255, 255, 255);
int width = 400;
int height = 400;
PNGImage image(width, height, PNGImage::RGBA); //Error when RGB because lodepng_get_raw_size_lct(w, h, colortype, bitdepth) > in.size() in encode
image.init(black);
// Please add your code here
/********** Begin ********/
Vec2i t0 = { 50 , 50 }, t1 = {300 ,200 }, t2 = {200 ,350 };
Triangle(t0 ,t1 , t2 , image, PNGColor(255, 0, 0, 255));
/********** End **********/
image.flip_vertically(); // i want to have the origin at the left bottom corner of the image
image.write_png_file("../img_step1/test.png");
return 0;
}?直线裁剪v1.0
第1关：Cohen-Sutherland编码裁剪算法
一. 任务描述
根据下面要求，在右侧修改代码，绘制出预期输出的图片。平台会对你编写的代码进行测试。
1.本关任务
（1）理解直线裁剪的原理（Cohen-Surtherland算法、中点分割算法、梁友栋算法）； （2）利用VC+OpenGL实现直线的编码裁剪算法，在屏幕上用一个封闭矩形裁剪任意一条直线； （3）调试、编译、修改程序；
2.运行前
3.输出
4.具体要求
（1）对CompCode(Point node, MyRect rect)函数进行补全； （2）对LineClipCohenSurtherland(MyRect rect, Point& node1, Point& node2)函数进行补全，最终实现裁剪后的图片。
// 评测代码所用头文件-开始
#include<opencv2/core/core.hpp>
#include<opencv2/highgui/highgui.hpp>
#include<opencv2/imgproc/imgproc.hpp>
// 评测代码所用头文件-结束
// 提示：写完代码请保存之后再进行评测
#include <GL/freeglut.h>
#include <stdio.h>
#define LEFT 1
#define RIGHT 2
#define BOTTOM 4
#define TOP 8
struct MyRect
{
int xmin, xmax, ymin, ymax;
MyRect() : xmin(), xmax(), ymin(), ymax(){};
MyRect(int a, int b, int c, int d) : xmin(a), xmax(b), ymin(c), ymax(d){};
};
struct Point
{
int x, y;
Point() : x(), y() {};
Point(int a, int b) :x(a), y(b) {};
};
MyRect rect;
Point vPoint[6];
void LineGL(Point node1, Point node2)
{
glBegin(GL_LINES);
glColor3f(0.0f, 1.0f, 0.0f);
glVertex2f(node1.x, node1.y);
glVertex2f(node2.x, node2.y);
glEnd();
}
int CompCode(Point node, MyRect rect)
{
// 请在此添加你的代码
/********** Begin ********/
int code = 0;
if (node.x < rect.xmin)
code |= LEFT;
else if (node.x > rect.xmax)
code |= RIGHT;
if (node.y < rect.ymin)
code |= BOTTOM;
else if (node.y > rect.ymax)
code |= TOP;
return code;
/********** End **********/
}
void LineClipCohenSurtherland(MyRect rect, Point& node1, Point& node2)
{
bool accept = false;
// 请在此添加你的代码
/********** Begin ********/
int code1 = CompCode(node1, rect);
int code2 = CompCode(node2, rect);
while (true)
{
if ((code1 | code2) == 0)
{
accept = true;
break;
}
else if (code1 & code2)
{
break;
}
else
{
int code = (code1 != 0) ? code1 : code2;
Point node;
if (code & LEFT)
{
node.x = rect.xmin;
node.y = node1.y + (node2.y - node1.y) * (rect.xmin - node1.x) / (node2.x - node1.x);
}
else if (code & RIGHT)
{
node.x = rect.xmax;
node.y = node1.y + (node2.y - node1.y) * (rect.xmax - node1.x) / (node2.x - node1.x);
}
else if (code & BOTTOM)
{
node.y = rect.ymin;
node.x = node1.x + (node2.x - node1.x) * (rect.ymin - node1.y) / (node2.y - node1.y);
}
else if (code & TOP)
{
node.y = rect.ymax;
node.x = node1.x + (node2.x - node1.x) * (rect.ymax - node1.y) / (node2.y - node1.y);
}
if (code == code1)
{
node1 = node;
code1 = CompCode(node1, rect);
}
else
{
node2 = node;
code2 = CompCode(node2, rect);
}
}
}
/********** End **********/
if (accept)
LineGL(node1, node2);
}
void MyDisplay()
{
glClear(GL_COLOR_BUFFER_BIT);
glColor3f(1.0f, 1.0f, 1.0f);
glRectf(rect.xmin, rect.ymin, rect.xmax, rect.ymax);
for (int i = 0; i < 5; i+=2)
LineClipCohenSurtherland(rect, vPoint[i], vPoint[i+1]);
glFlush();
}
void Init()
{
glClearColor(0.0, 0.0, 0.0, 0.0);
glShadeModel(GL_FLAT);
rect = MyRect(100, 300, 100, 300);
vPoint[0] = Point(200, 50); vPoint[1] = Point(350, 250);
vPoint[2] = Point(125, 205); vPoint[3] = Point(250, 255);
vPoint[4] = Point(40, 150); vPoint[5] = Point(150, 40);
}
void MyReshape(int w, int h)
{
glViewport(0, 0, (GLsizei)w, (GLsizei)h);
glMatrixMode(GL_PROJECTION);
glLoadIdentity();
gluOrtho2D(0.0, (GLdouble)w, 0.0, (GLdouble)h);
}
int main(int argc, char* argv[])
{
glutInit(&argc, argv);
glutInitDisplayMode(GLUT_RGB | GLUT_SINGLE);
glutInitWindowPosition(100, 100);
glutInitWindowSize(400, 400);
glutCreateWindow("Hello World!");
Init();
glutDisplayFunc(MyDisplay);
glutReshapeFunc(MyReshape);
glutMainLoopEvent();
/*************以下为评测代码，与本次实验内容无关，请勿修改**************/
GLubyte* pPixelData = (GLubyte*)malloc(400 * 400 * 3);//分配内存
GLint viewport[4] = {0};
glReadBuffer(GL_FRONT);
glPixelStorei(GL_UNPACK_ALIGNMENT, 4);
glGetIntegerv(GL_VIEWPORT, viewport);
glReadPixels(viewport[0], viewport[1], viewport[2], viewport[3], GL_RGB, GL_UNSIGNED_BYTE, pPixelData);
cv::Mat img;
std::vector<cv::Mat> imgPlanes;
img.create(400, 400, CV_8UC3);
cv::split(img, imgPlanes);
for(int i = 0; i < 400; i ++) {
unsigned char* plane0Ptr = imgPlanes[0].ptr<unsigned char>(i);
unsigned char* plane1Ptr = imgPlanes[1].ptr<unsigned char>(i);
unsigned char* plane2Ptr = imgPlanes[2].ptr<unsigned char>(i);
for(int j = 0; j < 400; j ++) {
int k = 3 * (i * 400 + j);
plane2Ptr[j] = pPixelData[k];
plane1Ptr[j] = pPixelData[k+1];
plane0Ptr[j] = pPixelData[k+2];
}
}
cv::merge(imgPlanes, img);
cv::flip(img, img ,0);
cv::namedWindow("openglGrab");
cv::imshow("openglGrab", img);
cv::imwrite("../img_step1/test.jpg", img);
return 0;
}?第2关：中点分割裁剪算法
一. 任务描述
根据下面要求，在右侧修改代码，绘制出预期输出的图片。平台会对你编写的代码进行测试。
1.本关任务
（1）理解直线裁剪的原理（Cohen-Surtherland算法、中点分割算法、梁友栋算法）； （2）利用VC+OpenGL实现直线的编码裁剪算法，在屏幕上用一个封闭矩形裁剪任意一条直线； （3）调试、编译、修改程序；
2.运行前
3.输出
// 评测代码所用头文件-开始 #include<opencv2/core/core.hpp> #include<opencv2/highgui/highgui.hpp> #include<opencv2/imgproc/imgproc.hpp> // 评测代码所用头文件-结束 // 提示：写完代码请保存之后再进行评测 #include <GL/freeglut.h> #include <stdio.h> #define LEFT 1 #define RIGHT 2 #define BOTTOM 4 #define TOP 8 struct MyRect { int xmin, xmax, ymin, ymax; MyRect() : xmin(), xmax(), ymin(), ymax(){}; MyRect(int a, int b, int c, int d) : xmin(a), xmax(b), ymin(c), ymax(d){}; }; struct Point { int x, y; Point() : x(), y() {}; Point(int a, int b) :x(a), y(b) {}; }; MyRect rect; Point vPoint[6]; void LineGL(Point node1, Point node2) { glBegin(GL_LINES); glColor3f(0.0f, 1.0f, 0.0f); glVertex2f(node1.x, node1.y); glVertex2f(node2.x, node2.y); glEnd(); } int CompCode(Point node, MyRect rect) { int code = 0x00; if (node.y < rect.ymin) code = code | BOTTOM; if (node.y > rect.ymax) code = code | TOP; if (node.x > rect.xmax) code = code | RIGHT; if (node.x < rect.xmin) code = code | LEFT; return code; } void LineClipMidPoint(MyRect rect, Point& node1, Point& node2) { bool accept = true; Point start, end, mid;//分别代表起点，终点和中点 int code1, code2, codemid; code1 = CompCode(node1, rect); code2 = CompCode(node2, rect); if(code1 == 0 && code2 == 0) accept = true; else if(code1 & code2) accept = false; else { if(code2!=0){ start = node1; end = node2; mid = Point((float)(start.x + end.x)/(float)2 + 0.5, (float)(start.y + end.y)/(float)2 + 0.5); while(abs(start.x - mid.x)>1 || abs(start.y - mid.y)>1){ codemid = CompCode(mid, rect); if(codemid==0){ start = mid; } else{ end = mid; } mid = Point((float)(start.x + end.x)/(float)2 + 0.5, (float)(start.y + end.y)/(float)2 + 0.5); } node2 = mid; } if(code1!=0){ start = node1; end = node2; mid = Point((float)(start.x + end.x)/(float)2 + 0.5, (float)(start.y + end.y)/(float)2 + 0.5); while(abs(start.x - mid.x)>1 || abs(start.y - mid.y)>1){ codemid = CompCode(mid, rect); if(codemid==0){ end = mid; } else{ start = mid; } mid = Point((float)(start.x + end.x)/(float)2 + 0.5, (float)(start.y + end.y)/(float)2 + 0.5); } node1 = mid; } } if (accept) LineGL(node1, node2); } void MyDisplay() { glClear(GL_COLOR_BUFFER_BIT); glColor3f(1.0f, 1.0f, 1.0f); glRectf(rect.xmin, rect.ymin, rect.xmax, rect.ymax); for (int i = 0; i < 5; i+=2) LineClipMidPoint(rect, vPoint[i], vPoint[i+1]); glFlush(); } void Init() { glClearColor(0.0, 0.0, 0.0, 0.0); glShadeModel(GL_FLAT); rect = MyRect(100, 300, 100, 300); vPoint[0] = Point(200, 50); vPoint[1] = Point(350, 250); vPoint[2] = Point(125, 205); vPoint[3] = Point(250, 255); vPoint[4] = Point(40, 150); vPoint[5] = Point(150, 40); } void MyReshape(int w, int h) { glViewport(0, 0, (GLsizei)w, (GLsizei)h); glMatrixMode(GL_PROJECTION); glLoadIdentity(); gluOrtho2D(0.0, (GLdouble)w, 0.0, (GLdouble)h); } int main(int argc, char* argv[]) { glutInit(&argc, argv); glutInitDisplayMode(GLUT_RGB | GLUT_SINGLE); glutInitWindowPosition(100, 100); glutInitWindowSize(400, 400); glutCreateWindow("Hello World!"); Init(); glutDisplayFunc(MyDisplay); glutReshapeFunc(MyReshape); glutMainLoopEvent(); /*************以下为评测代码，与本次实验内容无关，请勿修改**************/ GLubyte* pPixelData = (GLubyte*)malloc(400 * 400 * 3);//分配内存 GLint viewport[4] = {0}; glReadBuffer(GL_FRONT); glPixelStorei(GL_UNPACK_ALIGNMENT, 4); glGetIntegerv(GL_VIEWPORT, viewport); glReadPixels(viewport[0], viewport[1], viewport[2], viewport[3], GL_RGB, GL_UNSIGNED_BYTE, pPixelData); cv::Mat img; std::vector<cv::Mat> imgPlanes; img.create(400, 400, CV_8UC3); cv::split(img, imgPlanes); for(int i = 0; i < 400; i ++) { unsigned char* plane0Ptr = imgPlanes[0].ptr<unsigned char>(i); unsigned char* plane1Ptr = imgPlanes[1].ptr<unsigned char>(i); unsigned char* plane2Ptr = imgPlanes[2].ptr<unsigned char>(i); for(int j = 0; j < 400; j ++) { int k = 3 * (i * 400 + j); plane2Ptr[j] = pPixelData[k]; plane1Ptr[j] = pPixelData[k+1]; plane0Ptr[j] = pPixelData[k+2]; } } cv::merge(imgPlanes, img); cv::flip(img, img ,0); cv::namedWindow("openglGrab"); cv::imshow("openglGrab", img); cv::imwrite("../img_step3/test.jpg", img); return 0; }4.具体要求
对LineClipMidPoint(MyRect rect, Point& node1, Point& node2)函数进行补全，最终实现裁剪后的图片。
?第3关：Liang-Barsky参数化裁剪算法
一. 任务描述
根据下面要求，在右侧修改代码，绘制出预期输出的图片。平台会对你编写的代码进行测试。
1.本关任务
（1）理解直线裁剪的原理（Cohen-Surtherland算法、中点分割算法、梁友栋算法）； （2）利用VC+OpenGL实现直线的编码裁剪算法，在屏幕上用一个封闭矩形裁剪任意一条直线； （3）调试、编译、修改程序；
2.运行前
3.输出
4.具体要求
（1）对ClipTest(float p, float q, float* u1, float* u2)函数进行补全； （2）对LineClipLiangBarsky(MyRect rect, Point& node1, Point& node2)函数进行补全，最终实现裁剪后的图片。
// 评测代码所用头文件-开始
#include<opencv2/core/core.hpp>
#include<opencv2/highgui/highgui.hpp>
#include<opencv2/imgproc/imgproc.hpp>
// 评测代码所用头文件-结束
// 提示：写完代码请保存之后再进行评测
#include <GL/freeglut.h>
#include <stdio.h>
struct MyRect
{
int xmin, xmax, ymin, ymax;
MyRect() : xmin(), xmax(), ymin(), ymax(){};
MyRect(int a, int b, int c, int d) : xmin(a), xmax(b), ymin(c), ymax(d){};
};
struct Point
{
int x, y;
Point() : x(), y() {};
Point(int a, int b) :x(a), y(b) {};
};
MyRect rect;
Point vPoint[6];
void LineGL(Point node1, Point node2)
{
glBegin(GL_LINES);
glColor3f(0.0f, 1.0f, 0.0f);
glVertex2f(node1.x, node1.y);
glVertex2f(node2.x, node2.y);
glEnd();
}
int ClipTest(float p, float q, float* u1, float* u2)
{
if (p < 0.0)
{
float r = q / p;
if (r > *u2)
{
return 0;
}
else if (r > *u1)
{
*u1 = r;
}
}
else if (p > 0.0)
{
float r = q / p;
if (r < *u1)
{
return 0;
}
else if (r < *u2)
{
*u2 = r;
}
}
else if (q < 0.0)
{
return 0;
}
return 1;
}
bool LineClipLiangBarsky(MyRect rect, Point& node1, Point& node2)
{
float u1 = 0.0, u2 = 1.0;
int dx = node2.x - node1.x;
int dy = node2.y - node1.y;
if (ClipTest(-dx, node1.x - rect.xmin, &u1, &u2))
{
if (ClipTest(dx, rect.xmax - node1.x, &u1, &u2))
{
if (ClipTest(-dy, node1.y - rect.ymin, &u1, &u2))
{
if (ClipTest(dy, rect.ymax - node1.y, &u1, &u2))
{
if (u2 < 1.0)
{
node2.x = node1.x + u2*dx;
node2.y = node1.y + u2*dy;
}
if (u1 > 0.0)
{
node1.x = node1.x + u1*dx;
node1.y = node1.y + u1*dy;
}
return true;
}
}
}
}
return false;
}
void MyDisplay()
{
glClear(GL_COLOR_BUFFER_BIT);
glColor3f(1.0f, 1.0f, 1.0f);
glRectf(rect.xmin, rect.ymin, rect.xmax, rect.ymax);
for(int i = 0; i < 5; i+=2){
bool bAccept = LineClipLiangBarsky(rect, vPoint[i], vPoint[i+1]);
if(bAccept)
LineGL(vPoint[i], vPoint[i+1]);
}
glFlush();
}
void Init()
{
glClearColor(0.0, 0.0, 0.0, 0.0);
glShadeModel(GL_FLAT);
rect = MyRect(100, 300, 100, 300);
vPoint[0] = Point(200, 50); vPoint[1] = Point(350, 250);
vPoint[2] = Point(125, 205); vPoint[3] = Point(250, 255);
vPoint[4] = Point(40, 150); vPoint[5] = Point(150, 40);
}
void MyReshape(int w, int h)
{
glViewport(0, 0, (GLsizei)w, (GLsizei)h);
glMatrixMode(GL_PROJECTION);
glLoadIdentity();
gluOrtho2D(0.0, (GLdouble)w, 0.0, (GLdouble)h);
}
int main(int argc, char* argv[])
{
glutInit(&argc, argv);
glutInitDisplayMode(GLUT_RGB | GLUT_SINGLE);
glutInitWindowPosition(100, 100);
glutInitWindowSize(400, 400);
glutCreateWindow("Hello World!");
Init();
glutDisplayFunc(MyDisplay);
glutReshapeFunc(MyReshape);
glutMainLoopEvent();
/*************以下为评测代码，与本次实验内容无关，请勿修改**************/
GLubyte* pPixelData = (GLubyte*)malloc(400 * 400 * 3);//分配内存
GLint viewport[4] = {0};
glReadBuffer(GL_FRONT);
glPixelStorei(GL_UNPACK_ALIGNMENT, 4);
glGetIntegerv(GL_VIEWPORT, viewport);
glReadPixels(viewport[0], viewport[1], viewport[2], viewport[3], GL_RGB, GL_UNSIGNED_BYTE, pPixelData);
cv::Mat img;
std::vector<cv::Mat> imgPlanes;
img.create(400, 400, CV_8UC3);
cv::split(img, imgPlanes);
for(int i = 0; i < 400; i ++) {
unsigned char* plane0Ptr = imgPlanes[0].ptr<unsigned char>(i);
unsigned char* plane1Ptr = imgPlanes[1].ptr<unsigned char>(i);
unsigned char* plane2Ptr = imgPlanes[2].ptr<unsigned char>(i);
for(int j = 0; j < 400; j ++) {
int k = 3 * (i * 400 + j);
plane2Ptr[j] = pPixelData[k];
plane1Ptr[j] = pPixelData[k+1];
plane0Ptr[j] = pPixelData[k+2];
}
}
cv::merge(imgPlanes, img);
cv::flip(img, img ,0);
cv::namedWindow("openglGrab");
cv::imshow("openglGrab", img);
cv::imwrite("../img_step2/test.jpg", img);
return 0;
}CG2-v1.0-二维几何变换
第1关：正方形的平移与缩放
一.任务描述
根据提示，在右侧修改代码，并自己绘制出图形。平台会对你编写的代码进行测试。
1.本关任务
理解并掌握OpenGL二维平移、旋转、缩放变换的方法； 阅读实验原理，掌握OpenGL程序平移、旋转、缩放变换的方法。
2.预期输出
3.具体要求
(1).背景色为黑色，用 glClearColor（） 来完成； (2).以中心为绘制原点，设计一个边长为2的正方形将正方形设置为红色glColor3f(1.0, 0.0, 0.0)； (3).将原正方形保留下来并以正方形为基础，然后进行二维几何变换。将正方形向上平移2.0，同时将正方形沿X方向放大3倍，沿Y方向缩小成原来的0.5倍。新生成的矩形颜色为白色glColor3f (1.0, 1.0, 1.0)。
4.本关提示
(1).用glRectf(）函数来绘制正方形； (2).每进行一个矩阵操作时，需要先保存这个矩阵，调用glPushMatrix()函数，把当前矩阵压入堆栈。当需要恢复最近一次的保存时，调用glPopMatrix()函数，它相当于从堆栈栈顶弹出一个矩阵为当前矩阵（后边的三关都会用到）。
// 提示：写完代码请保存之后再进行评测
#include <GL/freeglut.h>
#include<stdio.h>
// 评测代码所用头文件-开始
#include<opencv2/core/core.hpp>
#include<opencv2/highgui/highgui.hpp>
#include<opencv2/imgproc/imgproc.hpp>
// 评测代码所用头文件-结束
void init(void)
{
glClearColor(0.0, 0.0, 0.0, 0.0); //设置背景颜色
glMatrixMode(GL_PROJECTION);
gluOrtho2D(-5.0, 5.0, -5.0, 5.0); //设置显示的范围是X:-5.0~5.0, Y:-5.0~5.0
glMatrixMode(GL_MODELVIEW);
}
void myDraw(void) //二维几何变换
{
// 请在此添加你的代码
/********** Begin ********/
glPushMatrix();
glColor3f(1.0, 0.0, 0.0);
glRectf(-1.0f, - 1.0f,1.0f,1.0f);
glPopMatrix();
glPushMatrix();
glTranslatef(0.0f,2.0f,0.0f);
glPushMatrix();
glScalef(3.0,0.5,1.0);
glColor3f (1.0, 1.0, 1.0);
glRectf(-1.0f, - 1.0f,1.0f,1.0f);
glFlush();
/********** End **********/
glFlush();
}
int main(int argc, char *argv[])
{
glutInit(&argc, argv);
glutInitWindowPosition(100, 100);
glutInitWindowSize(400, 400);
glutCreateWindow("几何变换示例");
init();
glutDisplayFunc(&myDraw);
glutMainLoopEvent();
/*************以下为评测代码，与本次实验内容无关，请勿修改**************/
GLubyte* pPixelData = (GLubyte*)malloc(400 * 400 * 3);//分配内存
GLint viewport[4] = {0};
glReadBuffer(GL_FRONT);
glPixelStorei(GL_UNPACK_ALIGNMENT, 4);
glGetIntegerv(GL_VIEWPORT, viewport);
glReadPixels(viewport[0], viewport[1], viewport[2], viewport[3], GL_RGB, GL_UNSIGNED_BYTE, pPixelData);
cv::Mat img;
std::vector<cv::Mat> imgPlanes;
img.create(400, 400, CV_8UC3);
cv::split(img, imgPlanes);
for(int i = 0; i < 400; i ++) {
unsigned char* plane0Ptr = imgPlanes[0].ptr<unsigned char>(i);
unsigned char* plane1Ptr = imgPlanes[1].ptr<unsigned char>(i);
unsigned char* plane2Ptr = imgPlanes[2].ptr<unsigned char>(i);
for(int j = 0; j < 400; j ++) {
int k = 3 * (i * 400 + j);
plane2Ptr[j] = pPixelData[k];
plane1Ptr[j] = pPixelData[k+1];
plane0Ptr[j] = pPixelData[k+2];
}
}
cv::merge(imgPlanes, img);
cv::flip(img, img ,0);
cv::namedWindow("openglGrab");
cv::imshow("openglGrab", img);
//cv::waitKey();
cv::imwrite("../img_step1/test.jpg", img);
return 0;
}?第2关：正方形的平移和旋转
一.任务描述
根据提示，在右侧修改代码，并自己绘制出图形。平台会对你编写的代码进行测试。
1.本关任务
理解并掌握OpenGL二维平移、旋转、缩放变换的方法； 阅读实验原理，掌握OpenGL程序平移、旋转、缩放变换的方法。
2.预期输出
3.具体要求
(1).背景色为黑色，用 glclearcolor 来完成； (2).以中心为绘制原点，设计一个边长为2的正方形将正方形设置为红色glColor3f(1.0, 0.0, 0.0)； (3).将原正方形保留下来并以正方形为基础，然后进行二维几何变换。将正方形向左平移3.0，同时将正方形沿X轴逆时针旋转45度，生成新的图形颜色为glColor3f (0.0, 1.0, 0.0); (4).再进行二维几何变换，将原正方形向右平移3.0，同时将正方形沿X轴逆时针旋转45度，生成新的图形颜色为glColor3f (0.0, 0.7, 0.0);
4.本关提示
(1).用glRectf(）函数来绘制正方形； (2).每进行一个矩阵操作时，需要先保存这个矩阵，调用glPushMatrix()函数，把当前矩阵压入堆栈。当需要恢复最近一次的保存时，调用glPopMatrix()函数，它相当于从堆栈栈顶弹出一个矩阵为当前矩阵。
// 提示：写完代码请保存之后再进行评测
#include <GL/freeglut.h>
#include<stdio.h>
// 评测代码所用头文件-开始
#include<opencv2/core/core.hpp>
#include<opencv2/highgui/highgui.hpp>
#include<opencv2/imgproc/imgproc.hpp>
// 评测代码所用头文件-结束
void init(void)
{
glClearColor(0.0, 0.0, 0.0, 0.0); //设置背景颜色
glMatrixMode(GL_PROJECTION);
gluOrtho2D(-5.0, 5.0, -5.0, 5.0); //设置显示的范围是X:-5.0~5.0, Y:-5.0~5.0
glMatrixMode(GL_MODELVIEW);
}
void myDraw(void) //二维几何变换
{
// 请在此添加你的代码
glPushMatrix();
glColor3f(1.0, 0.0, 0.0);
glRectf(-1.0f, - 1.0f,1.0f,1.0f);
glPopMatrix();
//glPushMatrix();
glTranslatef(-3.0f,0.0f,0.0f);
glPushMatrix();
glRotatef(45.0,0.0,0.0,1.0);
glColor3f (0.0, 1.0, 0.0);
glRectf(-1.0f, - 1.0f,1.0f,1.0f);
glPopMatrix();
glTranslatef(6.0f,0.0f,0.0f);
glPushMatrix();
glRotatef(45.0,0.0,0.0,1.0);
glColor3f (0.0, 0.7, 0.0);
glRectf(-1.0f, - 1.0f,1.0f,1.0f);
glPopMatrix();
glFlush();
/********** End **********/
glFlush();
}
int main(int argc, char *argv[])
{
glutInit(&argc, argv);
glutInitWindowPosition(100, 100);
glutInitWindowSize(400, 400);
glutCreateWindow("几何变换示例");
init();
glutDisplayFunc(&myDraw);
glutMainLoopEvent();
/*************以下为评测代码，与本次实验内容无关，请勿修改**************/
GLubyte* pPixelData = (GLubyte*)malloc(400 * 400 * 3);//分配内存
GLint viewport[4] = {0};
glReadBuffer(GL_FRONT);
glPixelStorei(GL_UNPACK_ALIGNMENT, 4);
glGetIntegerv(GL_VIEWPORT, viewport);
glReadPixels(viewport[0], viewport[1], viewport[2], viewport[3], GL_RGB, GL_UNSIGNED_BYTE, pPixelData);
cv::Mat img;
std::vector<cv::Mat> imgPlanes;
img.create(400, 400, CV_8UC3);
cv::split(img, imgPlanes);
for(int i = 0; i < 400; i ++) {
unsigned char* plane0Ptr = imgPlanes[0].ptr<unsigned char>(i);
unsigned char* plane1Ptr = imgPlanes[1].ptr<unsigned char>(i);
unsigned char* plane2Ptr = imgPlanes[2].ptr<unsigned char>(i);
for(int j = 0; j < 400; j ++) {
int k = 3 * (i * 400 + j);
plane2Ptr[j] = pPixelData[k];
plane1Ptr[j] = pPixelData[k+1];
plane0Ptr[j] = pPixelData[k+2];
}
}
cv::merge(imgPlanes, img);
cv::flip(img, img ,0);
cv::namedWindow("openglGrab");
cv::imshow("openglGrab", img);
//cv::waitKey();
cv::imwrite("../img_step2/test.jpg", img);
return 0;
}?第3关：正方形的变换组合
一.任务描述
根据提示，在右侧修改代码，并自己绘制出图形。平台会对你编写的代码进行测试。
1.本关任务
理解并掌握OpenGL二维平移、旋转、缩放变换的方法； 阅读实验原理，掌握OpenGL程序平移、旋转、缩放变换的方法。
2.预期输出
3.具体要求
(1).背景色为黑色，用 glclearcolor 来完成； (2).以中心为绘制原点，设计一个边长为2的正方形将正方形设置为红色glColor3f(1.0, 0.0, 0.0)； (3).完成前两关的内容； (4).将原正方形进行二维几何变换。将正方形向下平移3.0，同时将正方形沿X方向放大4倍，沿Y方向扩大成原来的1.5倍。新生成的矩形颜色为蓝色glColor3f (0.0, 0.0, 1.0)。
4.本关提示
(1).用glRectf(）函数来绘制正方形； (2).每进行一个矩阵操作时，需要先保存这个矩阵，调用glPushMatrix()函数，把当前矩阵压入堆栈。当需要恢复最近一次的保存时，调用glPopMatrix()函数，它相当于从堆栈栈顶弹出一个矩阵为当前矩阵。
// 提示：写完代码请保存之后再进行评测
#include <GL/freeglut.h>
#include<stdio.h>
// 评测代码所用头文件-开始
#include<opencv2/core/core.hpp>
#include<opencv2/highgui/highgui.hpp>
#include<opencv2/imgproc/imgproc.hpp>
// 评测代码所用头文件-结束
void init(void)
{
glClearColor(0.0, 0.0, 0.0, 0.0); //设置背景颜色
glMatrixMode(GL_PROJECTION);
gluOrtho2D(-5.0, 5.0, -5.0, 5.0); //设置显示的范围是X:-5.0~5.0, Y:-5.0~5.0
glMatrixMode(GL_MODELVIEW);
}
void myDraw(void) //二维几何变换
{
// 请在此添加你的代码
/********** Begin ********/
glClear (GL_COLOR_BUFFER_BIT); //清空
glLoadIdentity(); //将当前矩阵设为单位矩阵
glPushMatrix();
glTranslatef(0.0f,2.0f,0.0f);
glScalef(3.0,0.5,1.0);
glColor3f (1.0, 1.0, 1.0);
glRectf(-1.0f, -1.0f, 1.0f, 1.0f); //上面白色矩形
glPopMatrix();
glPushMatrix();
glTranslatef(-3.0,0.0,0.0);
glPushMatrix();
glRotatef(45.0,0.0,0.0,1.0);
glColor3f (0.0, 1.0, 0.0);
glRectf(-1.0f, -1.0f, 1.0f, 1.0f); //中间左菱形
glPopMatrix();
glTranslatef(3.0,0.0,0.0);
glPushMatrix();
glColor3f (1.0, 0.0, 0.0);
glRectf(-1.0f, -1.0f, 1.0f, 1.0f); //中间中菱形
glPopMatrix();
glTranslatef(3.0,0.0,0.0);
glPushMatrix();
glRotatef(45.0,0.0,0.0,1.0);
glColor3f (0.0, 0.7, 0.0);
glRectf(-1.0f, -1.0f, 1.0f, 1.0f); //中间右菱形
glPopMatrix();
glPopMatrix();
glTranslatef(0.0,-3.0,0.0);
glScalef(4.0,1.5,1.0);
glColor3f (0.0, 0.0, 1.0);
glRectf(-1.0f, -1.0f, 1.0f, 1.0f); //下面蓝色矩形
glFlush ( );
/********** End **********/
glFlush();
}
int main(int argc, char *argv[])
{
glutInit(&argc, argv);
glutInitWindowPosition(100, 100);
glutInitWindowSize(400, 400);
glutCreateWindow("几何变换示例");
init();
glutDisplayFunc(&myDraw);
glutMainLoopEvent();
/*************以下为评测代码，与本次实验内容无关，请勿修改**************/
GLubyte* pPixelData = (GLubyte*)malloc(400 * 400 * 3);//分配内存
GLint viewport[4] = {0};
glReadBuffer(GL_FRONT);
glPixelStorei(GL_UNPACK_ALIGNMENT, 4);
glGetIntegerv(GL_VIEWPORT, viewport);
glReadPixels(viewport[0], viewport[1], viewport[2], viewport[3], GL_RGB, GL_UNSIGNED_BYTE, pPixelData);
cv::Mat img;
std::vector<cv::Mat> imgPlanes;
img.create(400, 400, CV_8UC3);
cv::split(img, imgPlanes);
for(int i = 0; i < 400; i ++) {
unsigned char* plane0Ptr = imgPlanes[0].ptr<unsigned char>(i);
unsigned char* plane1Ptr = imgPlanes[1].ptr<unsigned char>(i);
unsigned char* plane2Ptr = imgPlanes[2].ptr<unsigned char>(i);
for(int j = 0; j < 400; j ++) {
int k = 3 * (i * 400 + j);
plane2Ptr[j] = pPixelData[k];
plane1Ptr[j] = pPixelData[k+1];
plane0Ptr[j] = pPixelData[k+2];
}
}
cv::merge(imgPlanes, img);
cv::flip(img, img ,0);
cv::namedWindow("openglGrab");
cv::imshow("openglGrab", img);
//cv::waitKey();
cv::imwrite("../img_step3/test.jpg", img);
return 0;
}?第4关：三菱形状
一.任务描述
根据提示，在右侧修改代码，并自己绘制出图形。平台会对你编写的代码进行测试。
1.本关任务
理解并掌握OpenGL二维平移、旋转、缩放变换的方法； 阅读实验原理，掌握OpenGL程序平移、旋转、缩放变换的方法； 利用虚拟机进行编程，以OpenGL为开发平台设计程序，设计二维几何变换图形。
2.预期输出
设计如图所示二维图形
3.具体要求
(1).背景色为黑色，用 glclearcolor 来完成； (2).三个菱形图形通过二维平移和旋转完成。颜色分别为红色(1.0, 0.0, 0.0)、蓝色(0.0, 0.0, 1.0)和绿色(0.0, 1.0, 0.0)； (3).三个菱形的长对角线长度为4.0，短对角线长度为2.0，三个菱形的交点为原点（0.0，0.0）； (4).红色菱形的长对角线与Y轴重合，每个菱形的长对角线夹角为120度。
4.本关提示
(1).可将绘制原始的图形设置成一个单独的函数便于调用，这样可以省去反复绘制原始图形的步骤； (2).画一个凸多边形可以调用glBegin(GL_POLYGON)，后边用glVertex2f( , )指定顶点坐标，需要注意凸多边形的顶点指定需要按逆时针方向； (3).保留原始图形可以看做调用平移函数并且平移的距离为(0.0，0.0，0.0)； (4).每进行一个矩阵操作时，需要先保存这个矩阵，调用glPushMatrix()函数，把当前矩阵压入堆栈。当需要恢复最近一次的保存时，调用glPopMatrix()函数，它相当于从堆栈栈顶弹出一个矩阵为当前矩阵。
// 提示：写完代码请保存之后再进行评测
#include <GL/freeglut.h>
#include<stdio.h>
// 评测代码所用头文件-开始
#include<opencv2/core/core.hpp>
#include<opencv2/highgui/highgui.hpp>
#include<opencv2/imgproc/imgproc.hpp>
// 评测代码所用头文件-结束
void init(void)
{
glClearColor(0.0, 0.0, 0.0, 0.0); //设置背景颜色
glMatrixMode(GL_PROJECTION);
gluOrtho2D(-5.0, 5.0, -5.0, 5.0); //设置显示的范围是X:-5.0~5.0, Y:-5.0~5.0
glMatrixMode(GL_MODELVIEW);
}
void drawDiamond(void) //绘制一个菱形
{
// 请在此添加你的代码
/********** Begin ********/
glBegin (GL_POLYGON); //顶点指定需要按逆时针方向
glVertex2f (0.0f,-1.0f);//下点
glVertex2f (2.0f,0.0f);//右点
glVertex2f (0.0f, 1.0f);//上点
glVertex2f (-2.0f,0.0f);//左点
glEnd ( );
/********** End **********/
}
void myDraw(void) //二维几何变换
{
// 请在此添加你的代码
/********** Begin ********/
glClear(GL_COLOR_BUFFER_BIT); //清空
glLoadIdentity(); //将当前矩阵设为单位矩阵
glPushMatrix();
glRotatef(30.0, 0.0, 0.0, 1.0);
glTranslatef(-2.0, 0.0, 0.0);
glColor3f(0.0, 1.0, 0.0);
drawDiamond();
glPopMatrix();
glPushMatrix();
glRotatef(150.0, 0.0, 0.0, 1.0);
glTranslatef(-2.0, 0.0, 0.0);
glColor3f(0.0, 0.0, 1.0);
drawDiamond();
glPopMatrix();
glPushMatrix();
glRotatef(270.0, 0.0, 0.0, 1.0);
glTranslatef(-2.0, 0.0, 0.0);
glColor3f(1.0, 0.0, 0.0);
drawDiamond();
/********** End **********/
glFlush();
}
int main(int argc, char *argv[])
{
glutInit(&argc, argv);
glutInitWindowPosition(100, 100);
glutInitWindowSize(400, 400);
glutCreateWindow("几何变换示例");
init();
glutDisplayFunc(&myDraw);
glutMainLoopEvent();
/*************以下为评测代码，与本次实验内容无关，请勿修改**************/
GLubyte* pPixelData = (GLubyte*)malloc(400 * 400 * 3);//分配内存
GLint viewport[4] = {0};
glReadBuffer(GL_FRONT);
glPixelStorei(GL_UNPACK_ALIGNMENT, 4);
glGetIntegerv(GL_VIEWPORT, viewport);
glReadPixels(viewport[0], viewport[1], viewport[2], viewport[3], GL_RGB, GL_UNSIGNED_BYTE, pPixelData);
cv::Mat img;
std::vector<cv::Mat> imgPlanes;
img.create(400, 400, CV_8UC3);
cv::split(img, imgPlanes);
for(int i = 0; i < 400; i ++) {
unsigned char* plane0Ptr = imgPlanes[0].ptr<unsigned char>(i);
unsigned char* plane1Ptr = imgPlanes[1].ptr<unsigned char>(i);
unsigned char* plane2Ptr = imgPlanes[2].ptr<unsigned char>(i);
for(int j = 0; j < 400; j ++) {
int k = 3 * (i * 400 + j);
plane2Ptr[j] = pPixelData[k];
plane1Ptr[j] = pPixelData[k+1];
plane0Ptr[j] = pPixelData[k+2];
}
}
cv::merge(imgPlanes, img);
cv::flip(img, img ,0);
cv::namedWindow("openglGrab");
cv::imshow("openglGrab", img);
//cv::waitKey();
cv::imwrite("../img_step4/test.jpg", img);
return 0;
}CG3-v2.0-图形几何变换
第1关：平移、缩放、旋转正方体
一. 任务描述
1. 本关任务
(1) 理解几何变换基本原理, 掌握平移、旋转、缩放变换的方法; (2) 根据平移算法原理补全translation、scale、rotation_x、rotation_y和rotation_z函数; (3) 根据几何变换基本原理,将main函数中的translation、scale、rotation_z参数补充完整。
2. 输入
(1) 代码将自动输入一个边长为2的obj正方体模型，具体模型如下图：
(2) 代码自动将模型投影到二维平面上生成一个边长为1的白色正方形，并且代码会生成红色x轴，绿色y轴，具体图片如下所示：
(3) 将立方体的顶点坐标分别向x,y,z轴正方向平移0.5个单位距离，然后绘制一个红色正方形； (4) 将立方体的顶点坐标分别沿x,y,z轴方向缩放0.5倍，然后绘制一个绿色正方形； (5) 将立方体的顶点坐标沿z轴逆时针方向旋转45度，然后绘制一个黄色正方形。
3. 输出
具体结果如下图所示：
#include <vector>
#include <cmath>
#include <algorithm>
#include <iostream>
#include "model.h"
#include "geometry.h"
#include "pngimage.h"
using namespace std;
const double PI = acos(-1.0);
void line(Vec3i p0, Vec3i p1, PNGImage &image, PNGColor color)
{
bool steep = false;
if (std::abs(p0.x - p1.x) < std::abs(p0.y - p1.y))
{
std::swap(p0.x, p0.y);
std::swap(p1.x, p1.y);
steep = true;
}
if (p0.x > p1.x)
{
std::swap(p0.x, p1.x);
std::swap(p0.y, p1.y);
}
int dx = p1.x - p0.x;
int dy = std::abs(p1.y - p0.y);
int y = p0.y;
int d = -dx;
for (int x = p0.x; x <= p1.x; x++)
{
if (steep)
image.set(y, x, color);
else
image.set(x, y, color);
d = d + 2 * dy;
if (d > 0)
{
y += (p1.y > p0.y ? 1 : -1);
d = d - 2 * dx;
}
}
}
Matrix viewport(int x, int y, int w, int h, int depth) {
Matrix m = Matrix::identity(4);
m[0][3] = x + w / 2.f;
m[1][3] = y + h / 2.f;
m[2][3] = depth / 2.f;
m[0][0] = w / 2.f;
m[1][1] = h / 2.f;
m[2][2] = depth / 2.f;
return m;
}
Matrix translation(Vec3f v) {
Matrix Tr = Matrix::identity(4);
// Please add the code here
/********** Begin ********/
Tr[0][3] = v.x;
Tr[1][3] = v.y;
Tr[2][3] = v.z;
/********** End *********/
return Tr;
}
Matrix scale(float factorX, float factorY, float factorZ)
{
Matrix Z = Matrix::identity(4);
/********** Begin ********/
Z[0][0] = factorX;
Z[1][1] = factorY;
Z[2][2] = factorZ;
/********** End *********/
return Z;
}
Matrix rotation_x(float angle)
{
angle = angle * PI / 180;
float sinangle = sin(angle);
float cosangle = cos(angle);
Matrix R = Matrix::identity(4);
/********** Begin ********/
R[1][1] = R[2][2] = cosangle;
R[1][2] = -sinangle;
R[2][1] = sinangle;
/********** End *********/
return R;
}
Matrix rotation_y(float angle)
{
angle = angle * PI / 180;
float sinangle = sin(angle);
float cosangle = cos(angle);
Matrix R = Matrix::identity(4);
/********** Begin ********/
R[0][0] = R[2][2] = cosangle;
R[0][2] = sinangle;
R[2][0] = -sinangle;
/********** End *********/
return R;
}
Matrix rotation_z(float angle) {
angle = angle * PI / 180;
float sinangle = sin(angle);
float cosangle = cos(angle);
Matrix R = Matrix::identity(4);
/********** Begin ********/
R[0][0] = R[1][1] = cosangle;
R[0][1] = -sinangle;
R[1][0] = sinangle;
/********** End *********/
return R;
}
int main(int argc, char** argv)
{
const PNGColor white = PNGColor(255, 255, 255, 255);
const PNGColor black = PNGColor(0, 0, 0, 255);
const PNGColor red = PNGColor(255, 0, 0, 255);
const PNGColor green = PNGColor(0, 255, 0, 255);
const PNGColor blue = PNGColor(0, 0, 255, 255);
const PNGColor yellow = PNGColor(255, 255, 0, 255);
Model *model = NULL;
const int width = 500;
const int height = 500;
const int depth = 255;
//generate some image
PNGImage image(width, height, PNGImage::RGBA); //Error when RGB because lodepng_get_raw_size_lct(w, h, colortype, bitdepth) > in.size() in encode
image.init(black);
model = new Model("../step3/cube.obj");
Matrix VP = viewport(width / 4, width / 4, width / 2, height / 2, depth);
{ // draw the axes
Vec3f x(1.f, 0.f, 0.f), y(0.f, 1.f, 0.f), o(0.f, 0.f, 0.f);
o = VP*o;
x = VP*x;
y = VP*y;
line(o, x, image, red);
line(o, y, image, green);
}
for (int i = 0; i < model->nfaces(); i++) {
std::vector<int> face = model->face(i);
for (int j = 0; j < (int)face.size(); j++) {
Vec3f wp0 = model->vert(face[j]);
Vec3f wp1 = model->vert(face[(j + 1) % face.size()]);
// draw the original model
Vec3f op0 = VP*wp0;
Vec3f op1 = VP*wp1;
line(op0, op1, image, white);
// draw the translated model
// Please add the code here
/********** Begin ********/
Matrix T = translation(Vec3f(0.5, 0.5, 0.5));
/********** End *********/
Vec3f tp0 = VP*T*wp0;
Vec3f tp1 = VP*T*wp1;
line(tp0, tp1, image, red);
// draw the scaled model
// Please add the code here
/********** Begin ********/
Matrix S = scale(0.5, 0.5, 0.5);
/********** End *********/
Vec3f sp0 = VP*S*wp0;
Vec3f sp1 = VP*S*wp1;
line(sp0, sp1, image, green);
// draw the rotated model
// Please add the code here
/********** Begin ********/
Matrix R = rotation_z(45);
/********** End *********/
Vec3f rp0 = VP*R*wp0;
Vec3f rp1 = VP*R*wp1;
line(rp0, rp1, image, yellow);
}
}
image.flip_vertically(); // i want to have the origin at the left bottom corner of the image
image.write_png_file("../img_step3/test.png");
delete model;
return 0;
}?第2关：图形的平移与缩放
一. 任务描述
1. 本关任务
(1) 理解几何变换基本原理, 掌握平移和缩放变换的方法; (2) 根据几何变换基本原理,将main函数中的空白部分补充完整。
2. 输入
(1) 代码将自动输入一个边长为2的obj正方体模型，具体模型如下图：
(2) 将立方体的顶点坐标分别沿x,y,z轴方向缩放0.5倍，然后绘制一个白色正方形； (3) 将立方体的顶点坐标分别沿x,y,z轴方向缩放0.5倍，再分别向x,y,z轴正方向平移0.5个单位距离，然后绘制一个红色正方形； (4) 将立方体的顶点坐标分别向x,y,z轴正方向平移0.5个单位距离，再分别沿x,y,z轴方向缩放0.5倍，然后绘制一个绿色正方形。
3. 输出
具体结果如下图所示：
#include <vector>
#include <cmath>
#include <algorithm>
#include <iostream>
#include "model.h"
#include "geometry.h"
#include "pngimage.h"
using namespace std;
const double PI = acos(-1.0);
void line(Vec3i p0, Vec3i p1, PNGImage &image, PNGColor color)
{
bool steep = false;
if (std::abs(p0.x - p1.x) < std::abs(p0.y - p1.y))
{
std::swap(p0.x, p0.y);
std::swap(p1.x, p1.y);
steep = true;
}
if (p0.x > p1.x)
{
std::swap(p0.x, p1.x);
std::swap(p0.y, p1.y);
}
int dx = p1.x - p0.x;
int dy = std::abs(p1.y - p0.y);
int y = p0.y;
int d = -dx;
for (int x = p0.x; x <= p1.x; x++)
{
if (steep)
image.set(y, x, color);
else
image.set(x, y, color);
d = d + 2 * dy;
if (d > 0)
{
y += (p1.y > p0.y ? 1 : -1);
d = d - 2 * dx;
}
}
}
Matrix viewport(int x, int y, int w, int h, int depth) {
Matrix m = Matrix::identity(4);
m[0][3] = x + w / 2.f;
m[1][3] = y + h / 2.f;
m[2][3] = depth / 2.f;
m[0][0] = w / 2.f;
m[1][1] = h / 2.f;
m[2][2] = depth / 2.f;
return m;
}
Matrix translation(Vec3f v) {
Matrix Tr = Matrix::identity(4);
Tr[0][3] = v.x;
Tr[1][3] = v.y;
Tr[2][3] = v.z;
return Tr;
}
Matrix scale(float factorX, float factorY, float factorZ)
{
Matrix Z = Matrix::identity(4);
Z[0][0] = factorX;
Z[1][1] = factorY;
Z[2][2] = factorZ;
return Z;
}
Matrix rotation_x(float angle)
{
angle = angle * PI / 180;
float sinangle = sin(angle);
float cosangle = cos(angle);
Matrix R = Matrix::identity(4);
R[1][1] = R[2][2] = cosangle;
R[1][2] = -sinangle;
R[2][1] = sinangle;
return R;
}
Matrix rotation_y(float angle)
{
angle = angle * PI / 180;
float sinangle = sin(angle);
float cosangle = cos(angle);
Matrix R = Matrix::identity(4);
R[0][0] = R[2][2] = cosangle;
R[0][2] = sinangle;
R[2][0] = -sinangle;
return R;
}
Matrix rotation_z(float angle) {
angle = angle * PI / 180;
float sinangle = sin(angle);
float cosangle = cos(angle);
Matrix R = Matrix::identity(4);
R[0][0] = R[1][1] = cosangle;
R[0][1] = -sinangle;
R[1][0] = sinangle;
return R;
}
int main(int argc, char** argv)
{
const PNGColor white = PNGColor(255, 255, 255, 255);
const PNGColor black = PNGColor(0, 0, 0, 255);
const PNGColor red = PNGColor(255, 0, 0, 255);
const PNGColor green = PNGColor(0, 255, 0, 255);
const PNGColor blue = PNGColor(0, 0, 255, 255);
const PNGColor yellow = PNGColor(255, 255, 0, 255);
Model *model = NULL;
const int width = 500;
const int height = 500;
const int depth = 255;
//generate some image
PNGImage image(width, height, PNGImage::RGBA); //Error when RGB because lodepng_get_raw_size_lct(w, h, colortype, bitdepth) > in.size() in encode
image.init(black);
model = new Model("cube.obj");
Matrix VP = viewport(width / 4, width / 4, width / 2, height / 2, depth);
for (int i = 0; i < model->nfaces(); i++)
{
std::vector<int> face = model->face(i);
for (int j = 0; j < (int)face.size(); j++)
{
Vec3f wp0 = model->vert(face[j]);
Vec3f wp1 = model->vert(face[(j + 1) % face.size()]);
// Please add the code here
/********** Begin ********/
Matrix S0 = scale(0.5, 0.5, 0.5);
Vec3f swp0 = S0 * wp0;
Vec3f swp1 = S0 * wp1;
// draw the model after scaled
Vec3f op0 = VP * swp0;
Vec3f op1 = VP * swp1;
line(op0, op1, image, white);
Matrix T = translation(Vec3f(0.5, 0.5, 0.5));
Matrix S = scale(0.5, 0.5, 0.5);
// scaled then translated
Vec3f tsp0 = VP*T*S*swp0;
Vec3f tsp1 = VP*T*S*swp1;
line(tsp0, tsp1, image, red);
// translated then scaled
Vec3f stp0 = VP*S*T*swp0;
Vec3f stp1 = VP*S*T*swp1;
line(stp0, stp1, image, green);
/********** End *********/
}
}
image.flip_vertically(); // i want to have the origin at the left bottom corner of the image
image.write_png_file("../img_step2/test.png");
delete model;
return 0;
}第3关：图形的平移与旋转
一. 任务描述
1. 本关任务
(1) 理解几何变换基本原理, 掌握平移和旋转变换的方法; (2) 根据几何变换基本原理,将main函数中的空白部分补充完整。
2. 输入
(1) 代码将自动输入一个边长为2的obj正方体模型，具体模型如下图：
(2) 将立方体的顶点坐标分别沿x,y,z轴方向缩放0.5倍，然后绘制一个白色正方形； (3) 将立方体的顶点坐标分别向x,y,z轴正方向平移0.5个单位距离，再沿z轴逆时针方向旋转45度，然后绘制一个绿色正方形 (4) 将立方体的顶点坐标分别沿z轴逆时针方向旋转45度，再分别向x,y,z轴正方向平移0.5个单位距离，然后绘制一个红色正方形；
3. 输出
具体结果如下图所示：
#include <vector>
#include <cmath>
#include <algorithm>
#include <iostream>
#include "model.h"
#include "geometry.h"
#include "pngimage.h"
using namespace std;
const double PI = acos(-1.0);
void line(Vec3i p0, Vec3i p1, PNGImage &image, PNGColor color)
{
bool steep = false;
if (std::abs(p0.x - p1.x) < std::abs(p0.y - p1.y))
{
std::swap(p0.x, p0.y);
std::swap(p1.x, p1.y);
steep = true;
}
if (p0.x > p1.x)
{
std::swap(p0.x, p1.x);
std::swap(p0.y, p1.y);
}
int dx = p1.x - p0.x;
int dy = std::abs(p1.y - p0.y);
int y = p0.y;
int d = -dx;
for (int x = p0.x; x <= p1.x; x++)
{
if (steep)
image.set(y, x, color);
else
image.set(x, y, color);
d = d + 2 * dy;
if (d > 0)
{
y += (p1.y > p0.y ? 1 : -1);
d = d - 2 * dx;
}
}
}
Matrix viewport(int x, int y, int w, int h, int depth) {
Matrix m = Matrix::identity(4);
m[0][3] = x + w / 2.f;
m[1][3] = y + h / 2.f;
m[2][3] = depth / 2.f;
m[0][0] = w / 2.f;
m[1][1] = h / 2.f;
m[2][2] = depth / 2.f;
return m;
}
Matrix translation(Vec3f v) {
Matrix Tr = Matrix::identity(4);
Tr[0][3] = v.x;
Tr[1][3] = v.y;
Tr[2][3] = v.z;
return Tr;
}
Matrix scale(float factorX, float factorY, float factorZ)
{
Matrix Z = Matrix::identity(4);
Z[0][0] = factorX;
Z[1][1] = factorY;
Z[2][2] = factorZ;
return Z;
}
Matrix rotation_x(float angle)
{
angle = angle * PI / 180;
float sinangle = sin(angle);
float cosangle = cos(angle);
Matrix R = Matrix::identity(4);
R[1][1] = R[2][2] = cosangle;
R[1][2] = -sinangle;
R[2][1] = sinangle;
return R;
}
Matrix rotation_y(float angle)
{
angle = angle * PI / 180;
float sinangle = sin(angle);
float cosangle = cos(angle);
Matrix R = Matrix::identity(4);
R[0][0] = R[2][2] = cosangle;
R[0][2] = sinangle;
R[2][0] = -sinangle;
return R;
}
Matrix rotation_z(float angle) {
angle = angle * PI / 180;
float sinangle = sin(angle);
float cosangle = cos(angle);
Matrix R = Matrix::identity(4);
R[0][0] = R[1][1] = cosangle;
R[0][1] = -sinangle;
R[1][0] = sinangle;
return R;
}
int main(int argc, char** argv)
{
const PNGColor white = PNGColor(255, 255, 255, 255);
const PNGColor black = PNGColor(0, 0, 0, 255);
const PNGColor red = PNGColor(255, 0, 0, 255);
const PNGColor green = PNGColor(0, 255, 0, 255);
const PNGColor blue = PNGColor(0, 0, 255, 255);
const PNGColor yellow = PNGColor(255, 255, 0, 255);
Model *model = NULL;
const int width = 500;
const int height = 500;
const int depth = 255;
//generate some image
PNGImage image(width, height, PNGImage::RGBA); //Error when RGB because lodepng_get_raw_size_lct(w, h, colortype, bitdepth) > in.size() in encode
image.init(black);
model = new Model("cube.obj");
Matrix VP = viewport(width / 4, width / 4, width / 2, height / 2, depth);
for (int i = 0; i < model->nfaces(); i++)
{
std::vector<int> face = model->face(i);
for (int j = 0; j < (int)face.size(); j++)
{
Vec3f wp0 = model->vert(face[j]);
Vec3f wp1 = model->vert(face[(j + 1) % face.size()]);
// Please add the code here
/********** Begin ********/
Matrix S = scale(0.5,0.5,0.5);
Vec3f sp0 = VP*S*wp0;
Vec3f sp1 = VP*S*wp1;
line(sp0,sp1,image,white);
Matrix P = rotation_z(45)*translation(Vec3f(0.5,0.5,0.5))*S;
Vec3f pp0 = VP*P*wp0;
Vec3f pp1 = VP*P*wp1;
line(pp0,pp1,image,green);
Matrix Q = translation(Vec3f(0.5,0.5,0.5))*rotation_z(45)*S;
Vec3f qp0 = VP*Q*wp0;
Vec3f qp1 = VP*Q*wp1;
line(qp0,qp1,image,red);
/********** End *********/
}
}
image.flip_vertically(); // i want to have the origin at the left bottom corner of the image
image.write_png_file("../img_step1/test.png");
delete model;
return 0;
}?第4关：图形的旋转与缩放
一. 任务描述
1. 本关任务
(1) 理解几何变换基本原理, 掌握旋转和缩放变换的方法; (2) 根据几何变换基本原理,将main函数中的空白部分补充完整。
2. 输入
(1) 代码将自动输入一个边长为2的obj正方体模型，具体模型如下图：
(2) 将立方体的顶点坐标分别沿x,y,z轴方向缩放0.5倍，然后绘制一个白色正方形； (3) 将立方体的顶点坐标分别向y,z轴缩放0.5倍，x轴保持不变，再沿z轴逆时针方向旋转45度，然后绘制一个绿色矩形； (4) 将立方体的顶点坐标分别沿z轴逆时针方向旋转45度，再分别向y,z轴缩放0.5倍，x轴保持不变，然后绘制一个红菱形。
3. 输出
具体结果如下图所示：
#include <vector>
#include <cmath>
#include <algorithm>
#include <iostream>
#include "model.h"
#include "geometry.h"
#include "pngimage.h"
using namespace std;
const double PI = acos(-1.0);
void line(Vec3i p0, Vec3i p1, PNGImage &image, PNGColor color)
{
bool steep = false;
if (std::abs(p0.x - p1.x) < std::abs(p0.y - p1.y))
{
std::swap(p0.x, p0.y);
std::swap(p1.x, p1.y);
steep = true;
}
if (p0.x > p1.x)
{
std::swap(p0.x, p1.x);
std::swap(p0.y, p1.y);
}
int dx = p1.x - p0.x;
int dy = std::abs(p1.y - p0.y);
int y = p0.y;
int d = -dx;
for (int x = p0.x; x <= p1.x; x++)
{
if (steep)
image.set(y, x, color);
else
image.set(x, y, color);
d = d + 2 * dy;
if (d > 0)
{
y += (p1.y > p0.y ? 1 : -1);
d = d - 2 * dx;
}
}
}
Matrix viewport(int x, int y, int w, int h, int depth) {
Matrix m = Matrix::identity(4);
m[0][3] = x + w / 2.f;
m[1][3] = y + h / 2.f;
m[2][3] = depth / 2.f;
m[0][0] = w / 2.f;
m[1][1] = h / 2.f;
m[2][2] = depth / 2.f;
return m;
}
Matrix translation(Vec3f v) {
Matrix Tr = Matrix::identity(4);
Tr[0][3] = v.x;
Tr[1][3] = v.y;
Tr[2][3] = v.z;
return Tr;
}
Matrix scale(float factorX, float factorY, float factorZ)
{
Matrix Z = Matrix::identity(4);
Z[0][0] = factorX;
Z[1][1] = factorY;
Z[2][2] = factorZ;
return Z;
}
Matrix rotation_x(float angle)
{
angle = angle * PI / 180;
float sinangle = sin(angle);
float cosangle = cos(angle);
Matrix R = Matrix::identity(4);
R[1][1] = R[2][2] = cosangle;
R[1][2] = -sinangle;
R[2][1] = sinangle;
return R;
}
Matrix rotation_y(float angle)
{
angle = angle * PI / 180;
float sinangle = sin(angle);
float cosangle = cos(angle);
Matrix R = Matrix::identity(4);
R[0][0] = R[2][2] = cosangle;
R[0][2] = sinangle;
R[2][0] = -sinangle;
return R;
}
Matrix rotation_z(float angle) {
angle = angle * PI / 180;
float sinangle = sin(angle);
float cosangle = cos(angle);
Matrix R = Matrix::identity(4);
R[0][0] = R[1][1] = cosangle;
R[0][1] = -sinangle;
R[1][0] = sinangle;
return R;
}
int main(int argc, char** argv)
{
const PNGColor white = PNGColor(255, 255, 255, 255);
const PNGColor black = PNGColor(0, 0, 0, 255);
const PNGColor red = PNGColor(255, 0, 0, 255);
const PNGColor green = PNGColor(0, 255, 0, 255);
const PNGColor blue = PNGColor(0, 0, 255, 255);
const PNGColor yellow = PNGColor(255, 255, 0, 255);
Model *model = NULL;
const int width = 500;
const int height = 500;
const int depth = 255;
//generate some image
PNGImage image(width, height, PNGImage::RGBA); //Error when RGB because lodepng_get_raw_size_lct(w, h, colortype, bitdepth) > in.size() in encode
image.init(black);
model = new Model("cube.obj");
Matrix VP = viewport(width / 4, width / 4, width / 2, height / 2, depth);
for (int i = 0; i < model->nfaces(); i++)
{
std::vector<int> face = model->face(i);
for (int j = 0; j < (int)face.size(); j++)
{
Vec3f wp0 = model->vert(face[j]);
Vec3f wp1 = model->vert(face[(j + 1) % face.size()]);
// Please add the code here
/********** Begin ********/
Matrix S = scale(0.5,0.5,0.5);
Vec3f sp0 = VP*S*wp0;
Vec3f sp1 = VP*S*wp1;
line(sp0,sp1,image,white);
Matrix P = rotation_z(45)*scale(1,0.5,0.5)*S;
Vec3f pp0 = VP*P*wp0;
Vec3f pp1 = VP*P*wp1;
line(pp0,pp1,image,green);
Matrix Q = scale(1,0.5,0.5)*rotation_z(45)*S;
Vec3f qp0 = VP*Q*wp0;
Vec3f qp1 = VP*Q*wp1;
line(qp0,qp1,image,red);
/********** End *********/
}
}
image.flip_vertically(); // i want to have the origin at the left bottom corner of the image
image.write_png_file("../img_step4/test.png");
delete model;
return 0;
}
?第5关：绘制三菱形状
一. 任务描述
1. 本关任务
(1) 理解几何变换基本原理, 掌握平移、旋转和缩放变换的方法; (2) 根据几何变换基本原理,将main函数中的空白部分补充完整来绘制三菱形状。
2. 输入
(1) 代码将自动输入一个边长为2的obj正方体模型，具体模型如下图：
(2) 将立方体的顶点坐标分别沿x,y,z轴方向缩放0.5倍； (3) 将立方体的顶点坐标分别沿z轴逆时针方向旋转45度，再分别向y,z轴缩放0.5倍，x轴保持不变，然后绘制一个红菱形； (4) 将红色菱形沿着x轴正方向平移
22??个单位距离，然后将红菱形沿Z轴逆时针旋转90度； (5)绿色和黄色菱形与红色菱形的夹角均为120度。3. 输出
具体结果如下图所示：
#include <vector>
#include <cmath>
#include <algorithm>
#include <iostream>
#include "model.h"
#include "geometry.h"
#include "pngimage.h"
using namespace std;
const double PI = acos(-1.0);
void line(Vec3i p0, Vec3i p1, PNGImage &image, PNGColor color)
{
bool steep = false;
if (std::abs(p0.x - p1.x) < std::abs(p0.y - p1.y))
{
std::swap(p0.x, p0.y);
std::swap(p1.x, p1.y);
steep = true;
}
if (p0.x > p1.x)
{
std::swap(p0.x, p1.x);
std::swap(p0.y, p1.y);
}
int dx = p1.x - p0.x;
int dy = std::abs(p1.y - p0.y);
int y = p0.y;
int d = -dx;
for (int x = p0.x; x <= p1.x; x++)
{
if (steep)
image.set(y, x, color);
else
image.set(x, y, color);
d = d + 2 * dy;
if (d > 0)
{
y += (p1.y > p0.y ? 1 : -1);
d = d - 2 * dx;
}
}
}
Matrix viewport(int x, int y, int w, int h, int depth) {
Matrix m = Matrix::identity(4);
m[0][3] = x + w / 2.f;
m[1][3] = y + h / 2.f;
m[2][3] = depth / 2.f;
m[0][0] = w / 2.f;
m[1][1] = h / 2.f;
m[2][2] = depth / 2.f;
return m;
}
Matrix translation(Vec3f v) {
Matrix Tr = Matrix::identity(4);
Tr[0][3] = v.x;
Tr[1][3] = v.y;
Tr[2][3] = v.z;
return Tr;
}
Matrix scale(float factorX, float factorY, float factorZ)
{
Matrix Z = Matrix::identity(4);
Z[0][0] = factorX;
Z[1][1] = factorY;
Z[2][2] = factorZ;
return Z;
}
Matrix rotation_x(float angle)
{
angle = angle * PI / 180;
float sinangle = sin(angle);
float cosangle = cos(angle);
Matrix R = Matrix::identity(4);
R[1][1] = R[2][2] = cosangle;
R[1][2] = -sinangle;
R[2][1] = sinangle;
return R;
}
Matrix rotation_y(float angle)
{
angle = angle * PI / 180;
float sinangle = sin(angle);
float cosangle = cos(angle);
Matrix R = Matrix::identity(4);
R[0][0] = R[2][2] = cosangle;
R[0][2] = sinangle;
R[2][0] = -sinangle;
return R;
}
Matrix rotation_z(float angle) {
angle = angle * PI / 180;
float sinangle = sin(angle);
float cosangle = cos(angle);
Matrix R = Matrix::identity(4);
R[0][0] = R[1][1] = cosangle;
R[0][1] = -sinangle;
R[1][0] = sinangle;
return R;
}
int main(int argc, char** argv)
{
const PNGColor white = PNGColor(255, 255, 255, 255);
const PNGColor black = PNGColor(0, 0, 0, 255);
const PNGColor red = PNGColor(255, 0, 0, 255);
const PNGColor green = PNGColor(0, 255, 0, 255);
const PNGColor blue = PNGColor(0, 0, 255, 255);
const PNGColor yellow = PNGColor(255, 255, 0, 255);
Model *model = NULL;
const int width = 800;
const int height = 800;
const int depth = 255;
//generate some image
PNGImage image(width, height, PNGImage::RGBA); //Error when RGB because lodepng_get_raw_size_lct(w, h, colortype, bitdepth) > in.size() in encode
image.init(black);
model = new Model("cube.obj");
Matrix VP = viewport(width / 4, width / 4, width / 2, height / 2, depth);
for (int i = 0; i < model->nfaces(); i++)
{
std::vector<int> face = model->face(i);
for (int j = 0; j < (int)face.size(); j++)
{
Vec3f wp0 = model->vert(face[j]);
Vec3f wp1 = model->vert(face[(j + 1) % face.size()]);
Matrix T = translation(Vec3f(sqrt(2)/2, 0, 0));
// Please add the code here
/********** Begin ********/
Matrix S = scale(0.5f,0.5f ,0.5f );
Matrix S1 = scale(1.f,0.5f ,0.5f );
Matrix R = rotation_z(45.f);
Matrix R3 = rotation_z(90.f);
Matrix R2 = rotation_z(120.f);
Matrix R1 = rotation_z(-120.f);
Vec3f sp0 = VP*R3*T*S1*R*S*wp0;
Vec3f sp1 = VP*R3*T*S1*R*S*wp1;
line(sp0, sp1, image, red);
Vec3f op0 = VP*R2*R3*T*S1*R*S*wp0;
Vec3f op1 = VP*R2*R3*T*S1*R*S*wp1;
line(op0, op1, image,green );
Vec3f Sp0 = VP*R1*R3*T*S1*R*S*wp0;
Vec3f Sp1 = VP*R1*R3*T*S1*R*S*wp1;
line(Sp0, Sp1, image,yellow );
/********** End *********/
}
}
image.flip_vertically(); // i want to have the origin at the left bottom corner of the image
image.write_png_file("../img_step5/test.png");
delete model;
return 0;
}模型、观察及视口变换v1.0
第1关：立方体模型变换
一.任务描述
根据提示，在右侧修改代码，并自己绘制出图形。平台会对你编写的代码进行测试。
1.本关任务
学习了解三维图形几何变换原理。 理解掌握OpenGL三维图形几何变换的方法。 理解掌握OpenGL程序的模型视图变换。 掌握OpenGL三维图形显示与观察的原理与实现。
2.预期输出
3.具体要求
(1).背景色为黑色，用 glclearcolor 来完成；
(2).运用glPushMatrix()函数和glPopMatrix()函数进行矩阵操作，以中心为绘制原点，设置前景色为红色glColor3f(1.0, 0.0, 0.0)，绘制单位立方体线框，用glutWireCube(1.0)完成;
(3).运用glPushMatrix()函数和glPopMatrix()函数进行矩阵操作，设置前景色为黑色glColor3f(0.0, 1.0, 0.0)，设置线宽为2.0用glLineWidth(2.0)完成，将原单位立方体线框沿X轴正方向平移2.0；
(4).运用glPushMatrix()函数和glPopMatrix()函数进行矩阵操作，沿X轴负方向平移2.0，设置前景色为蓝色glColor3f(0.0, 0.0, 1.0)，绘制单位立方体实体用glutSolidCube(1.0)完成；
// 提示：在合适的地方修改或添加代码
#include <GL/freeglut.h>
#include<stdio.h>
// 评测代码所用头文件-开始
#include<opencv2/core/core.hpp>
#include<opencv2/highgui/highgui.hpp>
#include<opencv2/imgproc/imgproc.hpp>
// 评测代码所用头文件-结束
GLint winWidth = 400, winHeight =400 ; //设置初始化窗口大小
/*观察坐标系参数设置*/
GLfloat x0 = 0.0, yy = 0.0, z0 = 5.0; //设置观察坐标系原点
GLfloat xref = 0.0, yref = 0.0, zref = 0.0; //设置观察坐标系参考点（视点）
GLfloat Vx = 0.0, Vy = 1.0, Vz = 0.0; //设置观察坐标系向上向量（y轴）
/*观察体参数设置 */
GLfloat xwMin = -1.0, ywMin = -1.0, xwMax = 1.0, ywMax = 1.0;//设置裁剪窗口坐标范围
GLfloat dnear = 1.5, dfar = 20.0; //设置远、近裁剪面深度范围
void init(void)
{
glClearColor(0.0, 0.0, 0.0, 0.0);
}
void display(void)
{
glClear(GL_COLOR_BUFFER_BIT);
glLoadIdentity();
/*观察变换*/
gluLookAt(x0, yy, z0, xref, yref, zref, Vx, Vy, Vz); //指定三维观察参数
// 请在此添加你的代码
/********** Begin ********/
//
glColor3f(1.0, 0.0, 0.0);
glPushMatrix();
glutWireCube(1.0);
glPopMatrix();
//
glColor3f(0.0, 1.0, 0.0);
glLineWidth(2.0);
glPushMatrix();
glTranslatef(2.0f,0.0f,0.0f);
glutWireCube(1.0);
glPopMatrix();
//
glColor3f(0.0, 0.0, 1.0);
glPushMatrix();
glTranslatef(-2.0f,0.0f,0.0f);
glutSolidCube(1.0);
glPopMatrix();
/********** End **********/
glFlush();
}
void reshape(GLint newWidth, GLint newHeight)
{
/*视口变换*/
glViewport(0, 0, newWidth, newHeight); //定义视口大小
/*投影变换*/
glMatrixMode(GL_PROJECTION);
glLoadIdentity();
/*透视投影，设置透视观察体*/
glFrustum(xwMin, xwMax, ywMin, ywMax, dnear, dfar);
/*模型变换*/
glMatrixMode(GL_MODELVIEW);
winWidth = newWidth;
winHeight = newHeight;
}
int main(int argc, char* argv[])
{
glutInit(&argc, argv);
glutInitWindowPosition(100, 100);
glutInitWindowSize( 400 , 400 ); //设置初始化窗口大小
glutCreateWindow("三维观察");
init();
glutDisplayFunc(display);
glutReshapeFunc(reshape);
glutMainLoopEvent();
/*************以下为评测代码，与本次实验内容无关，请勿修改**************/
GLubyte* pPixelData = (GLubyte*)malloc(800 * 400 * 3);//分配内存
GLint viewport[4] = { 0 };
glReadBuffer(GL_FRONT);
glPixelStorei(GL_UNPACK_ALIGNMENT, 4);
glGetIntegerv(GL_VIEWPORT, viewport);
glReadPixels(viewport[0], viewport[1], viewport[2], viewport[3], GL_RGB, GL_UNSIGNED_BYTE, pPixelData);
cv::Mat img;
std::vector<cv::Mat> imgPlanes;
img.create(400, 400, CV_8UC3);
cv::split(img, imgPlanes);
for (int i = 0; i < 400; i++) {
unsigned char* plane0Ptr = imgPlanes[0].ptr<unsigned char>(i);
unsigned char* plane1Ptr = imgPlanes[1].ptr<unsigned char>(i);
unsigned char* plane2Ptr = imgPlanes[2].ptr<unsigned char>(i);
for (int j = 0; j < 400; j++) {
int k = 3 * (i * 400 + j);
plane2Ptr[j] = pPixelData[k];
plane1Ptr[j] = pPixelData[k + 1];
plane0Ptr[j] = pPixelData[k + 2];
}
}
cv::merge(imgPlanes, img);
cv::flip(img, img, 0);
cv::namedWindow("openglGrab");
cv::imshow("openglGrab", img);
//cv::waitKey();
cv::imwrite("../img_step1/test.jpg", img);
return 0;
}?第2关：立方体观察变换
一.任务描述
根据提示，在右侧修改代码，并自己绘制出图形。平台会对你编写的代码进行测试。
1.本关任务
学习了解三维图形几何变换原理。 理解掌握OpenGL三维图形几何变换的方法。 理解掌握OpenGL程序的模型视图变换。 掌握OpenGL三维图形显示与观察的原理与实现。
2.预期输出
3.具体要求
(1).背景色为黑色，用 glclearcolor 来完成；
(2).运用glPushMatrix()函数和glPopMatrix()函数进行矩阵操作，以中心为绘制原点，设置前景色为红色glColor3f(1.0, 0.0, 0.0)，绘制单位立方体线框，用glutWireCube(1.0)完成;
(3).运用glPushMatrix()函数和glPopMatrix()函数进行矩阵操作，设置前景色为黑色glColor3f(0.0, 1.0, 0.0)，设置线宽为2.0用glLineWidth(2.0)完成，将原单位立方体线框沿X轴正方向平移2.0；
(4).运用glPushMatrix()函数和glPopMatrix()函数进行矩阵操作，沿X轴负方向平移2.0，设置前景色为蓝色glColor3f(0.0, 0.0, 1.0)，绘制单位立方体实体用glutSolidCube(1.0)完成；(5).视点改为（1.0,1.5,8.0)，观察中心改为在(0, 0 ,0)，向上矢量改为(0, 1, 0)；
(6).将glFrustum(xwMin, xwMax, ywMin, ywMax, dnear, dfar);换为透视投影gluPerspective (fovy,aspect,zNear,zFar)函数，参数分别为（视角，宽高比，近处，远处）。要求参数为gluPerspective(45, 1, 1, 100)。
// 提示：在合适的地方修改或添加代码
#include <GL/freeglut.h>
#include<stdio.h>
// 评测代码所用头文件-开始
#include<opencv2/core/core.hpp>
#include<opencv2/highgui/highgui.hpp>
#include<opencv2/imgproc/imgproc.hpp>
// 评测代码所用头文件-结束
GLint winWidth = 400, winHeight =400 ; //设置初始化窗口大小
/*观察坐标系参数设置*/
GLfloat x0 = 1.0, yy = 1.5, z0 = 8.0; //设置观察坐标系原点
GLfloat xref = 0.0, yref = 0.0, zref = 0.0; //设置观察坐标系参考点（视点）
GLfloat Vx = 0.0, Vy = 1.0, Vz = 0.0; //设置观察坐标系向上向量（y轴）
/*观察体参数设置 */
GLfloat xwMin = -1.0, ywMin = -1.0, xwMax = 1.0, ywMax = 1.0;//设置裁剪窗口坐标范围
GLfloat dnear = 1.5, dfar = 20.0; //设置远、近裁剪面深度范围
void init(void)
{
glClearColor(0.0, 0.0, 0.0, 0.0);
}
void display(void)
{
glClear(GL_COLOR_BUFFER_BIT);
glLoadIdentity();
/*观察变换*/
gluLookAt(x0, yy, z0, xref, yref, zref, Vx, Vy, Vz); //指定三维观察参数
// 请在此添加你的代码
/********** Begin ********/
glPushMatrix();
glColor3f(1.0, 0.0, 0.0);
glutWireCube(1.0);
glPopMatrix();
glPushMatrix();
glColor3f(0.0, 1.0, 0.0);
glLineWidth(2.0);
glTranslatef(2.0f,0.0f,0.0f);
glutWireCube(1.0);
glPopMatrix();
glPushMatrix();
glColor3f(0.0, 0.0, 1.0);
glLineWidth(2.0);
glTranslatef(-2.0f,0.0f,0.0f);
glutSolidCube(1.0);
glPopMatrix();
/********** End **********/
glFlush();
}
void reshape(GLint newWidth, GLint newHeight)
{
/*视口变换*/
glViewport(0, 0, newWidth, newHeight); //定义视口大小
/*投影变换*/
glMatrixMode(GL_PROJECTION);
glLoadIdentity();
/*透视投影，设置透视观察体*/
gluPerspective( 45,1,1,100 );
/*模型变换*/
glMatrixMode(GL_MODELVIEW);
winWidth = newWidth;
winHeight = newHeight;
}
int main(int argc, char* argv[])
{
glutInit(&argc, argv);
glutInitWindowPosition(100, 100);
glutInitWindowSize( 400 , 400 ); //设置初始化窗口大小
glutCreateWindow("三维观察");
init();
glutDisplayFunc(display);
glutReshapeFunc(reshape);
glutMainLoopEvent();
/*************以下为评测代码，与本次实验内容无关，请勿修改**************/
GLubyte* pPixelData = (GLubyte*)malloc(800 * 400 * 3);//分配内存
GLint viewport[4] = { 0 };
glReadBuffer(GL_FRONT);
glPixelStorei(GL_UNPACK_ALIGNMENT, 4);
glGetIntegerv(GL_VIEWPORT, viewport);
glReadPixels(viewport[0], viewport[1], viewport[2], viewport[3], GL_RGB, GL_UNSIGNED_BYTE, pPixelData);
cv::Mat img;
std::vector<cv::Mat> imgPlanes;
img.create(400, 400, CV_8UC3);
cv::split(img, imgPlanes);
for (int i = 0; i < 400; i++) {
unsigned char* plane0Ptr = imgPlanes[0].ptr<unsigned char>(i);
unsigned char* plane1Ptr = imgPlanes[1].ptr<unsigned char>(i);
unsigned char* plane2Ptr = imgPlanes[2].ptr<unsigned char>(i);
for (int j = 0; j < 400; j++) {
int k = 3 * (i * 400 + j);
plane2Ptr[j] = pPixelData[k];
plane1Ptr[j] = pPixelData[k + 1];
plane0Ptr[j] = pPixelData[k + 2];
}
}
cv::merge(imgPlanes, img);
cv::flip(img, img, 0);
cv::namedWindow("openglGrab");
cv::imshow("openglGrab", img);
//cv::waitKey();
cv::imwrite("../img_step2/test.jpg", img);
return 0;
}?第3关：立方体视口变换
一.任务描述
根据提示，在右侧修改代码，并自己绘制出图形。平台会对你编写的代码进行测试。
1.本关任务
学习了解三维图形几何变换原理。 理解掌握OpenGL三维图形几何变换的方法。 理解掌握OpenGL程序的模型视图变换。 掌握OpenGL三维图形显示与观察的原理与实现。
2.预期输出
3.具体要求
(1).背景色为黑色，用 glclearcolor 来完成；
(2).运用glPushMatrix()函数和glPopMatrix()函数进行矩阵操作，以中心为绘制原点，设置前景色为红色glColor3f(1.0, 0.0, 0.0)，绘制单位立方体线框，用glutWireCube(1.0)完成;
(3).运用glPushMatrix()函数和glPopMatrix()函数进行矩阵操作，设置前景色为黑色glColor3f(0.0, 1.0, 0.0)，设置线宽为2.0用glLineWidth(2.0)完成，将原单位立方体线框沿X轴正方向平移2.0；
(4).运用glPushMatrix()函数和glPopMatrix()函数进行矩阵操作，沿X轴负方向右平移2.0，设置前景色为蓝色glColor3f(0.0, 0.0, 1.0)，绘制单位立方体实体用glutSolidCube(1.0)完成； (5).进行视口变换视口宽为800，高为400。实验内调整winWidth和winHeight 来设置初始化窗口大小；(6).调用透视投影gluperspective()函数，参数为gluPerspective(45, 2, 1, 100)要求宽高比为2；
(7).在main函数中用glutInitWindowSize()调整视口窗口大小。
// 提示：在合适的地方修改或添加代码
#include <GL/freeglut.h>
#include<stdio.h>
// 评测代码所用头文件-开始
#include<opencv2/core/core.hpp>
#include<opencv2/highgui/highgui.hpp>
#include<opencv2/imgproc/imgproc.hpp>
// 评测代码所用头文件-结束
GLint winWidth =800 , winHeight =400 ; //设置初始化窗口大小
/*观察坐标系参数设置*/
GLfloat x0 = 0.0, yy = 0.0, z0 = 5.0; //设置观察坐标系原点
GLfloat xref = 0.0, yref = 0.0, zref = 0.0; //设置观察坐标系参考点（视点）
GLfloat Vx = 0.0, Vy = 1.0, Vz = 0.0; //设置观察坐标系向上向量（y轴）
/*观察体参数设置 */
GLfloat xwMin = -1.0, ywMin = -1.0, xwMax = 1.0, ywMax = 1.0;//设置裁剪窗口坐标范围
GLfloat dnear = 1.5, dfar = 20.0; //设置远、近裁剪面深度范围
void init(void)
{
glClearColor(0.0, 0.0, 0.0, 0.0);
}
void display(void)
{
glClear(GL_COLOR_BUFFER_BIT);
glLoadIdentity();
/*观察变换*/
gluLookAt(x0, yy, z0, xref, yref, zref, Vx, Vy, Vz); //指定三维观察参数
// 请在此添加你的代码
/********** Begin ********/
glColor3f(1.0, 0.0, 0.0);
glPushMatrix();
glutWireCube(1.0);
glPopMatrix();
glColor3f(0.0, 1.0, 0.0);
glLineWidth(2.0);
glPushMatrix();
glTranslatef(2.0f,0.0f,0.0f);
glutWireCube(1.0);
glPopMatrix();
glColor3f(0.0, 0.0, 1.0);
glPushMatrix();
glTranslatef(-2.0f,0.0f,0.0f);
glutSolidCube(1.0);
glPopMatrix();
/********** End **********/
glFlush();
}
void reshape(GLint newWidth, GLint newHeight)
{
/*视口变换*/
glViewport(0, 0, newWidth, newHeight); //定义视口大小
/*投影变换*/
glMatrixMode(GL_PROJECTION);
glLoadIdentity();
/*透视投影，设置透视观察体*/
gluPerspective( 45,2 ,1 ,100 );
/*模型变换*/
glMatrixMode(GL_MODELVIEW);
winWidth = newWidth;
winHeight = newHeight;
}
int main(int argc, char* argv[])
{
glutInit(&argc, argv);
glutInitWindowPosition(100, 100);
glutInitWindowSize( 800 ,400 ); //设置初始化窗口大小
glutCreateWindow("三维观察");
init();
glutDisplayFunc(display);
glutReshapeFunc(reshape);
glutMainLoopEvent();
/*************以下为评测代码，与本次实验内容无关，请勿修改**************/
GLubyte* pPixelData = (GLubyte*)malloc(800 * 400 * 3);//分配内存
GLint viewport[4] = { 0 };
glReadBuffer(GL_FRONT);
glPixelStorei(GL_UNPACK_ALIGNMENT, 4);
glGetIntegerv(GL_VIEWPORT, viewport);
glReadPixels(viewport[0], viewport[1], viewport[2], viewport[3], GL_RGB, GL_UNSIGNED_BYTE, pPixelData);
cv::Mat img;
std::vector<cv::Mat> imgPlanes;
img.create(400, 800, CV_8UC3);
cv::split(img, imgPlanes);
for (int i = 0; i < 400; i++) {
unsigned char* plane0Ptr = imgPlanes[0].ptr<unsigned char>(i);
unsigned char* plane1Ptr = imgPlanes[1].ptr<unsigned char>(i);
unsigned char* plane2Ptr = imgPlanes[2].ptr<unsigned char>(i);
for (int j = 0; j < 800; j++) {
int k = 3 * (i * 800 + j);
plane2Ptr[j] = pPixelData[k];
plane1Ptr[j] = pPixelData[k + 1];
plane0Ptr[j] = pPixelData[k + 2];
}
}
cv::merge(imgPlanes, img);
cv::flip(img, img, 0);
cv::namedWindow("openglGrab");
cv::imshow("openglGrab", img);
//cv::waitKey();
cv::imwrite("../img_step5/test.jpg", img);
return 0;
}模型、观察及视口变换v2.0
第1关：模型变换-左右两个立方体
一. 任务描述
1. 本关任务
(1) 理解模型变换基本原理,掌握平移和旋转变换的方法; (2) 根据模型变换基本原理,将main函数中的空白部分补充完整。
2. 输入
(1) 代码将自动输入一个边长为1的obj正方体模型，具体模型如下图：
(2) 代码自动将模型投影到二维平面上生成一个边长为1的白色立方体，具体图片如下所示：
(3) 将白色立方体的顶点坐标向x轴正方向平移1.2个单位距离，然后绘制一个红色立方形； (4) 将白色立方体的顶点坐标沿y轴逆时针方向旋转30度，再向x轴负方向平移1.3个单位距离，然后绘制一个绿色正方形。
3. 输出
具体结果如下图所示：
#include <vector>
#include <cmath>
#include <algorithm>
#include <iostream>
#include "model.h"
#include "geometry.h"
#include "pngimage.h"
using namespace std;
const double PI = acos(-1.0);
void line(Vec3i p0, Vec3i p1, PNGImage &image, PNGColor color)
{
bool steep = false;
if (std::abs(p0.x - p1.x) < std::abs(p0.y - p1.y))
{
std::swap(p0.x, p0.y);
std::swap(p1.x, p1.y);
steep = true;
}
if (p0.x > p1.x)
{
std::swap(p0.x, p1.x);
std::swap(p0.y, p1.y);
}
int dx = p1.x - p0.x;
int dy = std::abs(p1.y - p0.y);
int y = p0.y;
int d = -dx;
for (int x = p0.x; x <= p1.x; x++)
{
if (steep)
image.set(y, x, color);
else
image.set(x, y, color);
d = d + 2 * dy;
if (d > 0)
{
y += (p1.y > p0.y ? 1 : -1);
d = d - 2 * dx;
}
}
}
Matrix translation(Vec3f v) {//平移
Matrix Tr = Matrix::identity(4);
Tr[0][3] = v.x;
Tr[1][3] = v.y;
Tr[2][3] = v.z;
return Tr;
}
Matrix scale(float factorX, float factorY, float factorZ)
{
Matrix Z = Matrix::identity(4);
Z[0][0] = factorX;
Z[1][1] = factorY;
Z[2][2] = factorZ;
return Z;
}
Matrix rotation_x(float angle)
{
angle = angle * PI / 180;
float sinangle = sin(angle);
float cosangle = cos(angle);
Matrix R = Matrix::identity(4);
R[1][1] = R[2][2] = cosangle;
R[1][2] = -sinangle;
R[2][1] = sinangle;
return R;
}
Matrix rotation_y(float angle)
{
angle = angle * PI / 180;
float sinangle = sin(angle);
float cosangle = cos(angle);
Matrix R = Matrix::identity(4);
R[0][0] = R[2][2] = cosangle;
R[0][2] = sinangle;
R[2][0] = -sinangle;
return R;
}
Matrix rotation_z(float angle) {
angle = angle * PI / 180;
float sinangle = sin(angle);
float cosangle = cos(angle);
Matrix R = Matrix::identity(4);
R[0][0] = R[1][1] = cosangle;
R[0][1] = -sinangle;
R[1][0] = sinangle;
return R;
}
int main(int argc, char** argv)
{
const PNGColor white = PNGColor(255, 255, 255, 255);
const PNGColor black = PNGColor(0, 0, 0, 255);
const PNGColor red = PNGColor(255, 0, 0, 255);
const PNGColor green = PNGColor(0, 255, 0, 255);
const PNGColor blue = PNGColor(0, 0, 255, 255);
const PNGColor yellow = PNGColor(255, 255, 0, 255);
Model *model = NULL;
const int width = 500;
const int height = 500;
const int depth = 255;
Vec3f eye(0.5, 1.5, 4);
Vec3f center(0, 0, 0);
Matrix Projection = Matrix::projection(eye, center);
Matrix ViewPort = Matrix::viewport(width / 4, width / 4, width / 2, height / 2, depth);
//generate some image
PNGImage image(width, height, PNGImage::RGBA); //Error when RGB because lodepng_get_raw_size_lct(w, h, colortype, bitdepth) > in.size() in encode
image.init(black);
model = new Model("cube.obj");
for (int i = 0; i < model->nfaces(); i++)
{
std::vector<int> face = model->face(i);
for (int j = 0; j < (int)face.size(); j++)
{
Vec3f wp0 = model->vert(face[j]);
Vec3f wp1 = model->vert(face[(j + 1) % face.size()]);
Matrix S0 = scale(0.5, 0.5, 0.5);
Vec3f swp0 = S0 * wp0;
Vec3f swp1 = S0 * wp1;
// for comparing - draw the model after scaled
Vec3f op0 = ViewPort * Projection * swp0;
Vec3f op1 = ViewPort * Projection * swp1;
line(op0, op1, image, white);
// Please add the code here
/********** Begin ********/
//3) 将白色立方体的顶点坐标向x轴正方向平移1.2个单位距离，然后绘制一个红色立方形
Matrix S1 = translation(Vec3f(1.2,0.0,0.0));
op0 = ViewPort * Projection *S1 * swp0;
op1 = ViewPort * Projection *S1 * swp1;
line(op0, op1, image, red);
// (4) 将白色立方体的顶点坐标沿y轴逆时针方向旋转30度，再向x轴负方向平移1.3个单位距离，然后绘制一个绿色正方形
// Matrix rotation_y(float angle)
Matrix S3 = rotation_y(30.0);
Matrix S4 = translation(Vec3f(-1.3,0.0,0.0));
op0 = ViewPort * Projection *S4 *S3 * swp0;
op1 = ViewPort * Projection *S4 *S3 * swp1;
line(op0, op1, image,green );
/********** End *********/
}
}
image.flip_vertically(); // i want to have the origin at the left bottom corner of the image
image.write_png_file("../img_step1/test.png");
delete model;
return 0;
}第2关：观察变换
一. 任务描述
1. 本关任务
(1) 理解观察变换基本原理,将lookat函数中空白部分补充完整; (2) 将main函数中的参数补充完整。
2. 输入
(1) 代码将自动输入一个边长为1的obj正方体模型，具体模型如下图：
(2) 相机坐标为(0, 1.5, 4)，中心点坐标为（0，0，0），向上的矢量为Vec3f(0, 1, 0)
3. 输出
具体结果如下图所示：
#include <vector>
#include <cmath>
#include <algorithm>
#include <iostream>
#include "model.h"
#include "geometry.h"
#include "pngimage.h"
using namespace std;
const double PI = acos(-1.0);
void line(Vec3i p0, Vec3i p1, PNGImage &image, PNGColor color)
{
bool steep = false;
if (std::abs(p0.x - p1.x) < std::abs(p0.y - p1.y))
{
std::swap(p0.x, p0.y);
std::swap(p1.x, p1.y);
steep = true;
}
if (p0.x > p1.x)
{
std::swap(p0.x, p1.x);
std::swap(p0.y, p1.y);
}
int dx = p1.x - p0.x;
int dy = std::abs(p1.y - p0.y);
int y = p0.y;
int d = -dx;
for (int x = p0.x; x <= p1.x; x++)
{
if (steep)
image.set(y, x, color);
else
image.set(x, y, color);
d = d + 2 * dy;
if (d > 0)
{
y += (p1.y > p0.y ? 1 : -1);
d = d - 2 * dx;
}
}
}
Matrix lookat(Vec3f eye, Vec3f center, Vec3f up) {
Matrix res = Matrix::identity(4);
// Please add the code here
/********** Begin ********/
Vec3f z = (eye - center).normalize();
Vec3f x = (up^z).normalize();
Vec3f y = (z^x).normalize();
for (int i = 0; i < 3; i++) {
res[0][i] = x[i];
res[1][i] = y[i];
res[2][i] = z[i];
res[i][3] = -center[i];
}
/********** End ********/
return res;
}
Matrix translation(Vec3f v) {
Matrix Tr = Matrix::identity(4);
Tr[0][3] = v.x;
Tr[1][3] = v.y;
Tr[2][3] = v.z;
return Tr;
}
Matrix scale(float factorX, float factorY, float factorZ)
{
Matrix Z = Matrix::identity(4);
Z[0][0] = factorX;
Z[1][1] = factorY;
Z[2][2] = factorZ;
return Z;
}
Matrix rotation_x(float angle)
{
angle = angle * PI / 180;
float sinangle = sin(angle);
float cosangle = cos(angle);
Matrix R = Matrix::identity(4);
R[1][1] = R[2][2] = cosangle;
R[1][2] = -sinangle;
R[2][1] = sinangle;
return R;
}
Matrix rotation_y(float angle)
{
angle = angle * PI / 180;
float sinangle = sin(angle);
float cosangle = cos(angle);
Matrix R = Matrix::identity(4);
R[0][0] = R[2][2] = cosangle;
R[0][2] = sinangle;
R[2][0] = -sinangle;
return R;
}
Matrix rotation_z(float angle) {
angle = angle * PI / 180;
float sinangle = sin(angle);
float cosangle = cos(angle);
Matrix R = Matrix::identity(4);
R[0][0] = R[1][1] = cosangle;
R[0][1] = -sinangle;
R[1][0] = sinangle;
return R;
}
int main(int argc, char** argv)
{
const PNGColor white = PNGColor(255, 255, 255, 255);
const PNGColor black = PNGColor(0, 0, 0, 255);
const PNGColor red = PNGColor(255, 0, 0, 255);
const PNGColor green = PNGColor(0, 255, 0, 255);
const PNGColor blue = PNGColor(0, 0, 255, 255);
const PNGColor yellow = PNGColor(255, 255, 0, 255);
Model *model = NULL;
const int width = 500;
const int height = 500;
const int depth = 255;
// Please add the code here
/********** Begin ********/
Vec3f eye(0 ,1.5 ,4 );
Vec3f center( 0, 0 ,0 );
Matrix ModelView = lookat(eye, center, Vec3f( 0, 1 ,0 ));
// Please add the code here
/********** Begin ********/
Matrix Projection = Matrix::projection(eye, center);
Matrix ViewPort = Matrix::viewport(width / 4, width / 4, width / 2, height / 2, depth);
//generate some image
PNGImage image(width, height, PNGImage::RGBA); //Error when RGB because lodepng_get_raw_size_lct(w, h, colortype, bitdepth) > in.size() in encode
image.init(black);
model = new Model("cube.obj");
for (int i = 0; i < model->nfaces(); i++)
{
std::vector<int> face = model->face(i);
for (int j = 0; j < (int)face.size(); j++)
{
Vec3f wp0 = model->vert(face[j]);
Vec3f wp1 = model->vert(face[(j + 1) % face.size()]);
Matrix S0 = scale(0.5, 0.5, 0.5);
Vec3f swp0 = S0 * wp0;
Vec3f swp1 = S0 * wp1;
Vec3f sp0 = ViewPort*Projection*ModelView*swp0;
Vec3f sp1 = ViewPort*Projection*ModelView*swp1;
line(sp0, sp1, image, red);
}
}
image.flip_vertically(); // i want to have the origin at the left bottom corner of the image
image.write_png_file("../img_step2/test.png");
delete model;
return 0;
}?第3关：视口变换
一. 任务描述
1. 本关任务
(1) 理解视口变换的方法; (3) 根据视口变换的方法将viewport函数中的空白部分补充完整，并将main函数中的参数补充完整。
2. 输入
(1) 代码将自动输入一个边长为1的obj正方体模型，具体模型如下图：
(2) 视口矩阵中参数x、y的大小为宽度(width)的四分之一，参数w的大小为宽度的一半(width)，参数h的大小为高度的一半(height)，参数d=255。
3. 输出
具体结果如下图所示：
#include <vector>
#include <cmath>
#include <algorithm>
#include <iostream>
#include "model.h"
#include "geometry.h"
#include "pngimage.h"
using namespace std;
const double PI = acos(-1.0);
void line(Vec3i p0, Vec3i p1, PNGImage &image, PNGColor color)
{
bool steep = false;
if (std::abs(p0.x - p1.x) < std::abs(p0.y - p1.y))
{
std::swap(p0.x, p0.y);
std::swap(p1.x, p1.y);
steep = true;
}
if (p0.x > p1.x)
{
std::swap(p0.x, p1.x);
std::swap(p0.y, p1.y);
}
int dx = p1.x - p0.x;
int dy = std::abs(p1.y - p0.y);
int y = p0.y;
int d = -dx;
for (int x = p0.x; x <= p1.x; x++)
{
if (steep)
image.set(y, x, color);
else
image.set(x, y, color);
d = d + 2 * dy;
if (d > 0)
{
y += (p1.y > p0.y ? 1 : -1);
d = d - 2 * dx;
}
}
}
Matrix viewport(int x, int y, int w, int h, int depth) {
Matrix m = Matrix::identity(4);
// Please add the code here
/********** Begin ********/
m[0][0]=w/2;
m[0][3]=x+(w/2);
m[1][1]=h/2;
m[1][3]=y+h/2;
m[2][2]=255/2;
m[2][3]=255/2;
m[3][3]=1;
/********** End **********/
return m;
}
Matrix lookat(Vec3f eye, Vec3f center, Vec3f up) {
Vec3f z = (eye - center).normalize();
Vec3f x = (up^z).normalize();
Vec3f y = (z^x).normalize();
Matrix res = Matrix::identity(4);
for (int i = 0; i < 3; i++) {
res[0][i] = x[i];
res[1][i] = y[i];
res[2][i] = z[i];
res[i][3] = -center[i];
}
return res;
}
Matrix translation(Vec3f v) {
Matrix Tr = Matrix::identity(4);
Tr[0][3] = v.x;
Tr[1][3] = v.y;
Tr[2][3] = v.z;
return Tr;
}
Matrix scale(float factorX, float factorY, float factorZ)
{
Matrix Z = Matrix::identity(4);
Z[0][0] = factorX;
Z[1][1] = factorY;
Z[2][2] = factorZ;
return Z;
}
Matrix rotation_x(float angle)
{
angle = angle * PI / 180;
float sinangle = sin(angle);
float cosangle = cos(angle);
Matrix R = Matrix::identity(4);
R[1][1] = R[2][2] = cosangle;
R[1][2] = -sinangle;
R[2][1] = sinangle;
return R;
}
Matrix rotation_y(float angle)
{
angle = angle * PI / 180;
float sinangle = sin(angle);
float cosangle = cos(angle);
Matrix R = Matrix::identity(4);
R[0][0] = R[2][2] = cosangle;
R[0][2] = sinangle;
R[2][0] = -sinangle;
return R;
}
Matrix rotation_z(float angle) {
angle = angle * PI / 180;
float sinangle = sin(angle);
float cosangle = cos(angle);
Matrix R = Matrix::identity(4);
R[0][0] = R[1][1] = cosangle;
R[0][1] = -sinangle;
R[1][0] = sinangle;
return R;
}
int main(int argc, char** argv)
{
const PNGColor white = PNGColor(255, 255, 255, 255);
const PNGColor black = PNGColor(0, 0, 0, 255);
const PNGColor red = PNGColor(255, 0, 0, 255);
const PNGColor green = PNGColor(0, 255, 0, 255);
const PNGColor blue = PNGColor(0, 0, 255, 255);
const PNGColor yellow = PNGColor(255, 255, 0, 255);
Model *model = NULL;
Vec3f eye(0, 1.5, 4);
Vec3f center(0, 0, 0);
Matrix ModelView = lookat(eye, center, Vec3f(0, 1, 0));
Matrix Projection = Matrix::projection(eye, center);
const int width = 500;
const int height = 500;
const int depth = 255;
// Please add the code here
/********** Begin ********/
Matrix ViewPort = viewport(width/4,width/4,width/2,height/2,depth);
/********** End **********/
//generate some image
PNGImage image(width, height, PNGImage::RGBA); //Error when RGB because lodepng_get_raw_size_lct(w, h, colortype, bitdepth) > in.size() in encode
image.init(black);
model = new Model("cube.obj");
for (int i = 0; i < model->nfaces(); i++)
{
std::vector<int> face = model->face(i);
for (int j = 0; j < (int)face.size(); j++)
{
Vec3f wp0 = model->vert(face[j]);
Vec3f wp1 = model->vert(face[(j + 1) % face.size()]);
Matrix S0 = scale(0.5, 0.5, 0.5);
Vec3f swp0 = S0 * wp0;
Vec3f swp1 = S0 * wp1;
Vec3f sp0 = ViewPort*Projection*ModelView*swp0;
Vec3f sp1 = ViewPort*Projection*ModelView*swp1;
line(sp0, sp1, image, red);
}
}
image.flip_vertically(); // i want to have the origin at the left bottom corner of the image
image.write_png_file("../img_step3/test.png");
delete model;
return 0;
}投影变换v1.0
第1关：立方体透视投影
一.任务描述
根据提示，在右侧修改代码，并自己绘制出图形。平台会对你编写的代码进行测试。
1.本关任务
学习了解三维图形几何变换原理。 理解掌握OpenGL三维图形几何变换的方法。 理解掌握OpenGL程序的模型视图变换。 掌握OpenGL三维图形显示与观察的原理与实现。
2.预期输出
3.具体要求
(1).背景色为黑色，用 glclearcolor 来完成； (2).运用glPushMatrix()函数和glPopMatrix()函数进行矩阵操作，以中心为绘制原点，设置前景色为红色glColor3f(1.0, 0.0, 0.0)，绘制单位立方体线框，用glutWireCube(1.0)完成; (3).运用glPushMatrix()函数和glPopMatrix()函数进行矩阵操作，设置前景色为黑色glColor3f(0.0, 1.0, 0.0)，设置线宽为2.0用glLineWidth(2.0)完成，将原单位立方体线框沿X轴正方向平移2.0；
(4).运用glPushMatrix()函数和glPopMatrix()函数进行矩阵操作，沿X轴负方向平移2.0，设置前景色为蓝色glColor3f(0.0, 0.0, 1.0)，绘制单位立方体实体用glutSolidCube(1.0)完成； (5).由图可知，中间红色为一点透视。右边绿色和左边蓝色为两点透视。通过glRotatef()旋转绿色立方体来，完成蓝色立方体的三点透视。将绿色立方体绕X轴旋转+30度。
// 提示：在合适的地方修改或添加代码
#include <GL/freeglut.h>
#include<stdio.h>
// 评测代码所用头文件-开始
#include<opencv2/core/core.hpp>
#include<opencv2/highgui/highgui.hpp>
#include<opencv2/imgproc/imgproc.hpp>
// 评测代码所用头文件-结束
GLint winWidth = 400, winHeight =400 ; //设置初始化窗口大小
/*观察坐标系参数设置*/
GLfloat x0 = 0.0, yy = 0.0, z0 = 5.0; //设置观察坐标系原点
GLfloat xref = 0.0, yref = 0.0, zref = 0.0; //设置观察坐标系参考点（视点）
GLfloat Vx = 0.0, Vy = 1.0, Vz = 0.0; //设置观察坐标系向上向量（y轴）
/*观察体参数设置 */
GLfloat xwMin = -1.0, ywMin = -1.0, xwMax = 1.0, ywMax = 1.0;//设置裁剪窗口坐标范围
GLfloat dnear = 1.5, dfar = 20.0; //设置远、近裁剪面深度范围
void init(void)
{
glClearColor(0.0, 0.0, 0.0, 0.0);
}
void display(void)
{
glClear(GL_COLOR_BUFFER_BIT);
glLoadIdentity();
/*观察变换*/
gluLookAt(x0, yy, z0, xref, yref, zref, Vx, Vy, Vz); //指定三维观察参数
// 请在此添加你的代码
/********** Begin ********/
glPushMatrix();
glColor3f(1.0, 0.0, 0.0); //设置前景色为红色
glutWireCube(1.0); //绘制单位立方体线框
glPopMatrix();
glPushMatrix();
glColor3f(0.0, 1.0, 0.0); //设置前景色为黑色
glLineWidth(2.0); //设置线宽
glRotatef(30,1,0,0);
glTranslatef(2.0f, 0.0f, 0.0f);
glutWireCube(1.0); //绘制单位立方体线框
glPopMatrix();
glPushMatrix();
glTranslatef(-2.0f, 0.0f, 0.0f);
glColor3f(0.0, 0.0, 1.0);
glutSolidCube(1.0); //绘制单位立方体实体
glPopMatrix();
/********** End **********/
glFlush();
}
void reshape(GLint newWidth, GLint newHeight)
{
/*视口变换*/
glViewport(0, 0, newWidth, newHeight); //定义视口大小
/*投影变换*/
glMatrixMode(GL_PROJECTION);
glLoadIdentity();
/*透视投影，设置透视观察体*/
glFrustum(xwMin, xwMax, ywMin, ywMax, dnear, dfar);
/*模型变换*/
glMatrixMode(GL_MODELVIEW);
winWidth = newWidth;
winHeight = newHeight;
}
int main(int argc, char* argv[])
{
glutInit(&argc, argv);
glutInitWindowPosition(100, 100);
glutInitWindowSize( 400 , 400 ); //设置初始化窗口大小
glutCreateWindow("三维观察");
init();
glutDisplayFunc(display);
glutReshapeFunc(reshape);
glutMainLoopEvent();
/*************以下为评测代码，与本次实验内容无关，请勿修改**************/
GLubyte* pPixelData = (GLubyte*)malloc(800 * 400 * 3);//分配内存
GLint viewport[4] = { 0 };
glReadBuffer(GL_FRONT);
glPixelStorei(GL_UNPACK_ALIGNMENT, 4);
glGetIntegerv(GL_VIEWPORT, viewport);
glReadPixels(viewport[0], viewport[1], viewport[2], viewport[3], GL_RGB, GL_UNSIGNED_BYTE, pPixelData);
cv::Mat img;
std::vector<cv::Mat> imgPlanes;
img.create(400, 400, CV_8UC3);
cv::split(img, imgPlanes);
for (int i = 0; i < 400; i++) {
unsigned char* plane0Ptr = imgPlanes[0].ptr<unsigned char>(i);
unsigned char* plane1Ptr = imgPlanes[1].ptr<unsigned char>(i);
unsigned char* plane2Ptr = imgPlanes[2].ptr<unsigned char>(i);
for (int j = 0; j < 400; j++) {
int k = 3 * (i * 400 + j);
plane2Ptr[j] = pPixelData[k];
plane1Ptr[j] = pPixelData[k + 1];
plane0Ptr[j] = pPixelData[k + 2];
}
}
cv::merge(imgPlanes, img);
cv::flip(img, img, 0);
cv::namedWindow("openglGrab");
cv::imshow("openglGrab", img);
//cv::waitKey();
cv::imwrite("../img_step4/test.jpg", img);
return 0;
}
第2关：立方体平行投影
一.任务描述
根据提示，在右侧修改代码，并自己绘制出图形。平台会对你编写的代码进行测试。
1.本关任务
学习了解三维图形几何变换原理。 理解掌握OpenGL三维图形几何变换的方法。 理解掌握OpenGL程序的模型视图变换。 掌握OpenGL三维图形显示与观察的原理与实现。
2.预期输出
3.具体要求
(1).背景色为黑色，用 glclearcolor 来完成；
(2).运用glPushMatrix()函数和glPopMatrix()函数进行矩阵操作，以中心为绘制原点，设置前景色为红色glColor3f(1.0, 0.0, 0.0)，绘制单位立方体线框，用glutWireCube(1.0)完成;
(3).运用glPushMatrix()函数和glPopMatrix()函数进行矩阵操作，设置前景色为黑色glColor3f(0.0, 1.0, 0.0)，设置线宽为2.0用glLineWidth(2.0)完成，将原单位立方体线框沿X轴正方向平移2.0；
(4).运用glPushMatrix()函数和glPopMatrix()函数进行矩阵操作，沿X轴负方向平移2.0，设置前景色为蓝色glColor3f(0.0, 0.0, 1.0)，绘制单位立方体实体用glutSolidCube(1.0)完成；(5).进行平行投影调用glOrtho()函数，坐标为(左，右，下，上，近，远)，坐标为glOrtho(-3.0, 3.0, -3.0, 3.0,-100.0, 100.0);
// 提示：在合适的地方修改或添加代码
#include <GL/freeglut.h>
#include<stdio.h>
// 评测代码所用头文件-开始
#include<opencv2/core/core.hpp>
#include<opencv2/highgui/highgui.hpp>
#include<opencv2/imgproc/imgproc.hpp>
// 评测代码所用头文件-结束
GLint winWidth = 400, winHeight =400 ; //设置初始化窗口大小
/*观察坐标系参数设置*/
GLfloat x0 = 0.0, yy = 0.0, z0 = 5.0; //设置观察坐标系原点
GLfloat xref = 0.0, yref = 0.0, zref = 0.0; //设置观察坐标系参考点（视点）
GLfloat Vx = 0.0, Vy = 1.0, Vz = 0.0; //设置观察坐标系向上向量（y轴）
/*观察体参数设置 */
GLfloat xwMin = -1.0, ywMin = -1.0, xwMax = 1.0, ywMax = 1.0;//设置裁剪窗口坐标范围
GLfloat dnear = 1.5, dfar = 20.0; //设置远、近裁剪面深度范围
void init(void)
{
glClearColor(0.0, 0.0, 0.0, 0.0);
}
void display(void)
{
glClear(GL_COLOR_BUFFER_BIT);
glLoadIdentity();
/*观察变换*/
gluLookAt(x0, yy, z0, xref, yref, zref, Vx, Vy, Vz); //指定三维观察参数
// 请在此添加你的代码
/********** Begin ********/
glPushMatrix();
glColor3f(1.0, 0.0, 0.0); //设置前景色为红色
glutWireCube(1.0); //绘制单位立方体线框
glPopMatrix();
glPushMatrix();
glColor3f(0.0, 1.0, 0.0); //设置前景色为黑色
glLineWidth(2.0); //设置线宽
glTranslatef(2.0f, 0.0f, 0.0f);
glutWireCube(1.0); //绘制单位立方体线框
glPopMatrix();
glPushMatrix();
glTranslatef(-2.0f, 0.0f, 0.0f);
glColor3f(0.0, 0.0, 1.0);
glutSolidCube(1.0); //绘制单位立方体实体
glPopMatrix();
/********** End **********/
glFlush();
}
void reshape(GLint newWidth, GLint newHeight)
{
/*视口变换*/
glViewport(0, 0, newWidth, newHeight); //定义视口大小
/*投影变换*/
glMatrixMode(GL_PROJECTION);
glLoadIdentity();
/*平行投影*/
glOrtho( -3,3 ,-3 ,3 ,-100 ,100 );
/*模型变换*/
glMatrixMode(GL_MODELVIEW);
winWidth = newWidth;
winHeight = newHeight;
}
int main(int argc, char* argv[])
{
glutInit(&argc, argv);
glutInitWindowPosition(100, 100);
glutInitWindowSize( 400 , 400 ); //设置初始化窗口大小
glutCreateWindow("三维观察");
init();
glutDisplayFunc(display);
glutReshapeFunc(reshape);
glutMainLoopEvent();
/*************以下为评测代码，与本次实验内容无关，请勿修改**************/
GLubyte* pPixelData = (GLubyte*)malloc(800 * 400 * 3);//分配内存
GLint viewport[4] = { 0 };
glReadBuffer(GL_FRONT);
glPixelStorei(GL_UNPACK_ALIGNMENT, 4);
glGetIntegerv(GL_VIEWPORT, viewport);
glReadPixels(viewport[0], viewport[1], viewport[2], viewport[3], GL_RGB, GL_UNSIGNED_BYTE, pPixelData);
cv::Mat img;
std::vector<cv::Mat> imgPlanes;
img.create(400, 400, CV_8UC3);
cv::split(img, imgPlanes);
for (int i = 0; i < 400; i++) {
unsigned char* plane0Ptr = imgPlanes[0].ptr<unsigned char>(i);
unsigned char* plane1Ptr = imgPlanes[1].ptr<unsigned char>(i);
unsigned char* plane2Ptr = imgPlanes[2].ptr<unsigned char>(i);
for (int j = 0; j < 400; j++) {
int k = 3 * (i * 400 + j);
plane2Ptr[j] = pPixelData[k];
plane1Ptr[j] = pPixelData[k + 1];
plane0Ptr[j] = pPixelData[k + 2];
}
}
cv::merge(imgPlanes, img);
cv::flip(img, img, 0);
cv::namedWindow("openglGrab");
cv::imshow("openglGrab", img);
//cv::waitKey();
cv::imwrite("../img_step3/test.jpg", img);
return 0;
}投影变换v2.0
第1关：一点透视
一. 任务描述
1. 本关任务
(1) 理解透视投影变换的方法; (2) 将projection函数和main函数中的空白部分补充完整。
2. 输入
(1) 代码将自动输入一个边长为1的obj正方体模型，具体模型如下图：
(2) 代码自动将模型投影到二维平面中心生成一个边长为1的立方体，经过模型变换和投影变换后生成三个绿色的方体，三个立方体的投影变换eye的坐标均为(0,0,5)，具体图片如下所示：
(3) 参考已有代码，将中心立绿色方体的顶点分别向y轴负方向平移1.2个单位，绘制一个红色立方体。再将红色立方体顶点分别向x轴正，负两个方向平移1.2个单位，绘制两个红色立方体。三个立方体的投影变换eye的坐标均为(0,0,4)； (4) 将中心绿色立方体的顶点分别向y轴正方向平移1.2个单位，绘制一个黄色立方体。再将黄色立方体顶点分别向x轴正，负两个方向平移1.2个单位，绘制两个黄色立方体。三个立方体的投影变换eye的坐标均为(0,0,8)；
3. 输出
具体结果如下图所示：
#include <vector>
#include <cmath>
#include <algorithm>
#include <iostream>
#include "model.h"
#include "geometry.h"
#include "pngimage.h"
using namespace std;
const double PI = acos(-1.0);
void line(Vec3i p0, Vec3i p1, PNGImage &image, PNGColor color)
{
bool steep = false;
if (std::abs(p0.x - p1.x) < std::abs(p0.y - p1.y))
{
std::swap(p0.x, p0.y);
std::swap(p1.x, p1.y);
steep = true;
}
if (p0.x > p1.x)
{
std::swap(p0.x, p1.x);
std::swap(p0.y, p1.y);
}
int dx = p1.x - p0.x;
int dy = std::abs(p1.y - p0.y);
int y = p0.y;
int d = -dx;
for (int x = p0.x; x <= p1.x; x++)
{
if (steep)
image.set(y, x, color);
else
image.set(x, y, color);
d = d + 2 * dy;
if (d > 0)
{
y += (p1.y > p0.y ? 1 : -1);
d = d - 2 * dx;
}
}
}
Matrix projection(Vec3f eye, Vec3f center)
{
Matrix m = Matrix::identity(4);
// Please add the code here
/********** Begin ********/
m[3][2] = -1.f / (eye - center).norm();
/********** End **********/
return m;
}
Matrix viewport(int x, int y, int w, int h, int depth) {
Matrix m = Matrix::identity(4);
m[0][3] = x + w / 2.f;
m[1][3] = y + h / 2.f;
m[2][3] = depth / 2.f;
m[0][0] = w / 2.f;
m[1][1] = h / 2.f;
m[2][2] = depth / 2.f;
return m;
}
Matrix lookat(Vec3f eye, Vec3f center, Vec3f up) {
Vec3f z = (eye - center).normalize();
Vec3f x = (up^z).normalize();
Vec3f y = (z^x).normalize();
Matrix res = Matrix::identity(4);
for (int i = 0; i < 3; i++) {
res[0][i] = x[i];
res[1][i] = y[i];
res[2][i] = z[i];
res[i][3] = -center[i];
}
return res;
}
Matrix translation(Vec3f v) {
Matrix Tr = Matrix::identity(4);
Tr[0][3] = v.x;
Tr[1][3] = v.y;
Tr[2][3] = v.z;
return Tr;
}
Matrix scale(float factorX, float factorY, float factorZ)
{
Matrix Z = Matrix::identity(4);
Z[0][0] = factorX;
Z[1][1] = factorY;
Z[2][2] = factorZ;
return Z;
}
Matrix rotation_x(float angle)
{
angle = angle * PI / 180;
float sinangle = sin(angle);
float cosangle = cos(angle);
Matrix R = Matrix::identity(4);
R[1][1] = R[2][2] = cosangle;
R[1][2] = -sinangle;
R[2][1] = sinangle;
return R;
}
Matrix rotation_y(float angle)
{
angle = angle * PI / 180;
float sinangle = sin(angle);
float cosangle = cos(angle);
Matrix R = Matrix::identity(4);
R[0][0] = R[2][2] = cosangle;
R[0][2] = sinangle;
R[2][0] = -sinangle;
return R;
}
Matrix rotation_z(float angle) {
angle = angle * PI / 180;
float sinangle = sin(angle);
float cosangle = cos(angle);
Matrix R = Matrix::identity(4);
R[0][0] = R[1][1] = cosangle;
R[0][1] = -sinangle;
R[1][0] = sinangle;
return R;
}
int main(int argc, char** argv)
{
const PNGColor white = PNGColor(255, 255, 255, 255);
const PNGColor black = PNGColor(0, 0, 0, 255);
const PNGColor red = PNGColor(255, 0, 0, 255);
const PNGColor green = PNGColor(0, 255, 0, 255);
const PNGColor blue = PNGColor(0, 0, 255, 255);
const PNGColor yellow = PNGColor(255, 255, 0, 255);
Model *model = NULL;
const int width = 800;
const int height = 800;
const int depth = 255;
Vec3f center(0, 0, 0);
Matrix ViewPort = viewport(width / 4, width / 4, width / 2, height / 2, depth);
//generate some image
PNGImage image(width, height, PNGImage::RGBA);
image.init(black);
model = new Model("cube.obj");
for (int i = 0; i < model->nfaces(); i++)
{
std::vector<int> face = model->face(i);
for (int j = 0; j < (int)face.size(); j++)
{
Vec3f wp0 = model->vert(face[j]);
Vec3f wp1 = model->vert(face[(j + 1) % face.size()]);
Matrix S0 = scale(0.5, 0.5, 0.5);
Vec3f swp0 = S0 * wp0;
Vec3f swp1 = S0 * wp1;
// 一点透视
float t[3] = { -1.2, 0, 1.2 };
Matrix ModelView = Matrix::identity(4);
PNGColor clr[3] = { red, green, yellow };
Vec3f eye2(0, 0, 5);
Matrix Projection2 = projection(eye2, center);
for (int j = 0; j < 3; j++)
{
ModelView = translation(Vec3f(t[j], t[1], 0));
Vec3f op0 = ViewPort * Projection2 * ModelView * swp0;
Vec3f op1 = ViewPort * Projection2 * ModelView *swp1;
line(op0, op1, image, green);
}
// Please add the code here
/********** Begin ********/
Vec3f eye1(0, 0, 4);
Matrix Projection1 = projection(eye1, center);
for (int j = 0; j < 3; j++)
{
ModelView = translation(Vec3f(t[j], t[0], 0));
Vec3f op0 = ViewPort * Projection1 * ModelView * swp0;
Vec3f op1 = ViewPort * Projection1 * ModelView *swp1;
line(op0, op1, image, red);
}
Vec3f eye3(0, 0, 8);
Matrix Projection3 = projection(eye3, center);
for (int j = 0; j < 3; j++)
{
ModelView = translation(Vec3f(t[j], t[2], 0));
Vec3f op0 = ViewPort * Projection3 * ModelView * swp0;
Vec3f op1 = ViewPort * Projection3 * ModelView *swp1;
line(op0, op1, image, yellow);
}
/********** End **********/
}
}
image.flip_vertically(); // i want to have the origin at the left bottom corner of the image
image.write_png_file("../img_step1/test.png");
delete model;
return 0;
}第2关：两点透视
一. 任务描述
1. 本关任务
(1) 理解透视投影变换的方法; (2) 将main函数中的空白部分补充完整。
2. 输入
(1) 代码将自动输入一个边长为1的obj正方体模型，具体模型如下图：
(2) 代码自动将模型投影到二维平面中心生成一个边长为1的绿色立方体； (3) 改变模型位置，产生两点透视: 将绿色立方体顶点分别沿z轴逆时针旋转45度，向y轴正方向平移1.2个单位，绘制一个红色立方体。再将红色立方体顶点分别向x轴正，负两个方向平移1.2个单位，绘制两个红色立方体。最后对三个红立方体进行投影变换，变换矩阵Projection已给出； (4) 改变视点与模型位置，产生两点透视(先模型变换再观察变换)： 首先将立绿色方体的顶点分别向x轴正，负两个方向平移1.2个单位，绘制两个绿色立方体。然后对三个绿色立方体分别进行观察变换，将参数eye沿y轴顺时针旋转45度作为相机坐标，中心点坐标为center，向上矢量为Vec3f(0, 1, 0)。最后对三个绿立方体进行投影变换，变换矩阵Projection已给出； (5) 改变视点与模型位置，产生两点透视(先观察变换再模型变换)： 首先对绿色立方体分别进行观察变换，将参数eye沿y轴顺时针旋转45度作为相机坐标，中心点坐标为center，向上矢量为Vec3f(0, 1, 0)。将绿色立方体向y轴负方向平移1.2个单位，绘制一个黄色立方体。再将黄色立方体顶点分别向x轴正，负两个方向平移1.2个单位，绘制两个黄色立方体。最后对三个黄立方体进行投影变换，变换矩阵Projection已给出。
3. 输出
具体结果如下图所示：
#include <vector>
#include <cmath>
#include <algorithm>
#include <iostream>
#include "model.h"
#include "geometry.h"
#include "pngimage.h"
using namespace std;
const double PI = acos(-1.0);
void line(Vec3i p0, Vec3i p1, PNGImage &image, PNGColor color)
{
bool steep = false;
if (std::abs(p0.x - p1.x) < std::abs(p0.y - p1.y))
{
std::swap(p0.x, p0.y);
std::swap(p1.x, p1.y);
steep = true;
}
if (p0.x > p1.x)
{
std::swap(p0.x, p1.x);
std::swap(p0.y, p1.y);
}
int dx = p1.x - p0.x;
int dy = std::abs(p1.y - p0.y);
int y = p0.y;
int d = -dx;
for (int x = p0.x; x <= p1.x; x++)
{
if (steep)
image.set(y, x, color);
else
image.set(x, y, color);
d = d + 2 * dy;
if (d > 0)
{
y += (p1.y > p0.y ? 1 : -1);
d = d - 2 * dx;
}
}
}
Matrix projection(Vec3f eye, Vec3f center)
{
Matrix m = Matrix::identity(4);
m[3][2] = -1.f / (eye - center).norm();
return m;
}
Matrix viewport(int x, int y, int w, int h, int depth) {
Matrix m = Matrix::identity(4);
m[0][3] = x + w / 2.f;
m[1][3] = y + h / 2.f;
m[2][3] = depth / 2.f;
m[0][0] = w / 2.f;
m[1][1] = h / 2.f;
m[2][2] = depth / 2.f;
return m;
}
Matrix lookat(Vec3f eye, Vec3f center, Vec3f up) {
Vec3f z = (eye - center).normalize();
Vec3f x = (up^z).normalize();
Vec3f y = (z^x).normalize();
Matrix res = Matrix::identity(4);
for (int i = 0; i < 3; i++) {
res[0][i] = x[i];
res[1][i] = y[i];
res[2][i] = z[i];
res[i][3] = -center[i];
}
return res;
}
Matrix translation(Vec3f v) {
Matrix Tr = Matrix::identity(4);
Tr[0][3] = v.x;
Tr[1][3] = v.y;
Tr[2][3] = v.z;
return Tr;
}
Matrix scale(float factorX, float factorY, float factorZ)
{
Matrix Z = Matrix::identity(4);
Z[0][0] = factorX;
Z[1][1] = factorY;
Z[2][2] = factorZ;
return Z;
}
Matrix rotation_x(float angle)
{
angle = angle * PI / 180;
float sinangle = sin(angle);
float cosangle = cos(angle);
Matrix R = Matrix::identity(4);
R[1][1] = R[2][2] = cosangle;
R[1][2] = -sinangle;
R[2][1] = sinangle;
return R;
}
Matrix rotation_y(float angle)
{
angle = angle * PI / 180;
float sinangle = sin(angle);
float cosangle = cos(angle);
Matrix R = Matrix::identity(4);
R[0][0] = R[2][2] = cosangle;
R[0][2] = sinangle;
R[2][0] = -sinangle;
return R;
}
Matrix rotation_z(float angle) {
angle = angle * PI / 180;
float sinangle = sin(angle);
float cosangle = cos(angle);
Matrix R = Matrix::identity(4);
R[0][0] = R[1][1] = cosangle;
R[0][1] = -sinangle;
R[1][0] = sinangle;
return R;
}
int main(int argc, char** argv)
{
const PNGColor white = PNGColor(255, 255, 255, 255);
const PNGColor black = PNGColor(0, 0, 0, 255);
const PNGColor red = PNGColor(255, 0, 0, 255);
const PNGColor green = PNGColor(0, 255, 0, 255);
const PNGColor blue = PNGColor(0, 0, 255, 255);
const PNGColor yellow = PNGColor(255, 255, 0, 255);
Model *model = NULL;
const int width = 800;
const int height = 800;
const int depth = 255;
//generate some image
PNGImage image(width, height, PNGImage::RGBA); //Error when RGB because lodepng_get_raw_size_lct(w, h, colortype, bitdepth) > in.size() in encode
image.init(black);
model = new Model("cube.obj");
Vec3f eye(0, 0, 4);
Vec3f center(0, 0, 0);
Matrix ModelView = Matrix::identity(4);
Matrix Projection = projection(eye, center);
Matrix ViewPort = viewport(width / 4, width / 4, width / 2, height / 2, depth);
for (int i = 0; i < model->nfaces(); i++)
{
std::vector<int> face = model->face(i);
for (int j = 0; j < (int)face.size(); j++)
{
Vec3f wp0 = model->vert(face[j]);
Vec3f wp1 = model->vert(face[(j + 1) % face.size()]);
Matrix S0 = scale(0.4, 0.4, 0.4);
Vec3f swp0 = S0 * wp0;
Vec3f swp1 = S0 * wp1;
// Please add the code here
/********** Begin ********/
float tx[3] = { -1.2, 0, 1.2 };
for (int i = 0; i < 3; i++)
{
ModelView = translation(Vec3f(tx[i], 1.2, 0)) * rotation_y(45);
Vec3f op0 = ViewPort * Projection * ModelView * swp0;
Vec3f op1 = ViewPort * Projection * ModelView * swp1;
line(op0, op1, image, red);
}
// 改变视点与模型位置，产生两点透视
// 先模型变换，再视点变换
Vec3f eye1 = rotation_y(-45) * eye;
for (int j = 0; j < 3; j++)
{
Matrix ModelView1 = lookat(eye1, center, Vec3f(0, 1, 0)) * translation(Vec3f(tx[j], 0, 0));
Vec3f vp0 = ViewPort * Projection * ModelView1 * swp0;
Vec3f vp1 = ViewPort * Projection * ModelView1 *swp1;
line(vp0, vp1, image, green);
}
// 改变视点与模型位置，产生两点透视
// 先视点变换，再模型变换
for (int k = 0; k < 3; k++)
{
Matrix ModelView1 = translation(Vec3f(tx[k], -1.2, 0)) * lookat(eye1, center, Vec3f(0, 1, 0));
Vec3f vp0 = ViewPort * Projection * ModelView1 * swp0;
Vec3f vp1 = ViewPort * Projection * ModelView1 *swp1;
line(vp0, vp1, image, yellow);
}
/********** End ********/
}
}
image.flip_vertically(); // i want to have the origin at the left bottom corner of the image
image.write_png_file("../img_step2/test.png");
delete model;
return 0;
}?第3关：三视图与正等测投影
一. 任务描述
1. 本关任务
(1) 理解投影变换的方法; (2) 将main函数中的空白部分补充完整。
2. 输入
(1) 代码将自动输入一个边长为1的obj正方体模型，具体模型如下图：
(2) 代码自动将模型投影到二维平面，经过模型变换，生成一个长宽高不等的立方体； (3) 将立方体沿Z轴向XOY平面正投影，并绘制出一个白色矩形； (4) 将立方体沿Y轴向XOZ平面正投影，然后沿X轴逆时针旋转90度，最后沿着Y轴负方向平移1.2个单位长度，绘制一个红色矩形； (5) 将立方体沿X轴向YOZ平面正投影，然后沿Y轴顺时针旋转90度，最后沿着X轴负方向平移1.2个单位长度，绘制一个绿色矩形； (6) 绘制正等测投影图，将立方体沿Z轴逆时针旋转45度，再沿X轴逆时针旋转35.25度，然后沿Z轴向XOY平面正投影。最后沿着Y轴正方向平移1.2个单位长度，绘制一个黄色立方体；
3. 输出
具体结果如下图所示：
#include <vector>
#include <cmath>
#include <algorithm>
#include <iostream>
#include "model.h"
#include "geometry.h"
#include "pngimage.h"
using namespace std;
const double PI = acos(-1.0);
void line(Vec3i p0, Vec3i p1, PNGImage &image, PNGColor color)
{
bool steep = false;
if (std::abs(p0.x - p1.x) < std::abs(p0.y - p1.y))
{
std::swap(p0.x, p0.y);
std::swap(p1.x, p1.y);
steep = true;
}
if (p0.x > p1.x)
{
std::swap(p0.x, p1.x);
std::swap(p0.y, p1.y);
}
int dx = p1.x - p0.x;
int dy = std::abs(p1.y - p0.y);
int y = p0.y;
int d = -dx;
for (int x = p0.x; x <= p1.x; x++)
{
if (steep)
image.set(y, x, color);
else
image.set(x, y, color);
d = d + 2 * dy;
if (d > 0)
{
y += (p1.y > p0.y ? 1 : -1);
d = d - 2 * dx;
}
}
}
Matrix projection(Vec3f eye, Vec3f center)
{
Matrix m = Matrix::identity(4);
m[3][2] = -1.f / (eye - center).norm();
return m;
}
Matrix viewport(int x, int y, int w, int h, int depth) {
Matrix m = Matrix::identity(4);
m[0][3] = x + w / 2.f;
m[1][3] = y + h / 2.f;
m[2][3] = depth / 2.f;
m[0][0] = w / 2.f;
m[1][1] = h / 2.f;
m[2][2] = depth / 2.f;
return m;
}
Matrix lookat(Vec3f eye, Vec3f center, Vec3f up) {
Vec3f z = (eye - center).normalize();
Vec3f x = (up^z).normalize();
Vec3f y = (z^x).normalize();
Matrix res = Matrix::identity(4);
for (int i = 0; i < 3; i++) {
res[0][i] = x[i];
res[1][i] = y[i];
res[2][i] = z[i];
res[i][3] = -center[i];
}
return res;
}
Matrix translation(Vec3f v) {
Matrix Tr = Matrix::identity(4);
Tr[0][3] = v.x;
Tr[1][3] = v.y;
Tr[2][3] = v.z;
return Tr;
}
Matrix scale(float factorX, float factorY, float factorZ)
{
Matrix Z = Matrix::identity(4);
Z[0][0] = factorX;
Z[1][1] = factorY;
Z[2][2] = factorZ;
return Z;
}
Matrix rotation_x(float angle)
{
angle = angle * PI / 180;
float sinangle = sin(angle);
float cosangle = cos(angle);
Matrix R = Matrix::identity(4);
R[1][1] = R[2][2] = cosangle;
R[1][2] = -sinangle;
R[2][1] = sinangle;
return R;
}
Matrix rotation_y(float angle)
{
angle = angle * PI / 180;
float sinangle = sin(angle);
float cosangle = cos(angle);
Matrix R = Matrix::identity(4);
R[0][0] = R[2][2] = cosangle;
R[0][2] = sinangle;
R[2][0] = -sinangle;
return R;
}
Matrix rotation_z(float angle) {
angle = angle * PI / 180;
float sinangle = sin(angle);
float cosangle = cos(angle);
Matrix R = Matrix::identity(4);
R[0][0] = R[1][1] = cosangle;
R[0][1] = -sinangle;
R[1][0] = sinangle;
return R;
}
int main(int argc, char** argv)
{
const PNGColor white = PNGColor(255, 255, 255, 255);
const PNGColor black = PNGColor(0, 0, 0, 255);
const PNGColor red = PNGColor(255, 0, 0, 255);
const PNGColor green = PNGColor(0, 255, 0, 255);
const PNGColor blue = PNGColor(0, 0, 255, 255);
const PNGColor yellow = PNGColor(255, 255, 0, 255);
Model *model = NULL;
const int width = 800;
const int height = 800;
const int depth = 255;
//generate some image
PNGImage image(width, height, PNGImage::RGBA); //Error when RGB because lodepng_get_raw_size_lct(w, h, colortype, bitdepth) > in.size() in encode
image.init(black);
model = new Model("cube.obj");
Matrix ViewPort = viewport(width / 4, width / 4, width / 2, height / 2, depth);
for (int i = 0; i < model->nfaces(); i++)
{
std::vector<int> face = model->face(i);
for (int j = 0; j < (int)face.size(); j++)
{
Vec3f wp0 = model->vert(face[j]);
Vec3f wp1 = model->vert(face[(j + 1) % face.size()]);
Matrix S0 = scale(0.5, 0.4, 0.3);
Vec3f swp0 = S0 * wp0;
Vec3f swp1 = S0 * wp1;
/********** Begin ********/
Matrix ProjectionX = Matrix::identity(4);
ProjectionX[0][0] = 0.0f;
Matrix ProjectionY = Matrix::identity(4);
ProjectionY[1][1] = 0.0f;
Matrix ProjectionZ = Matrix::identity(4);
ProjectionZ[2][2] = 0.0f;
//沿Z轴向XOY平面投影
Vec3f zp0 = ViewPort * ProjectionZ * swp0;
Vec3f zp1 = ViewPort * ProjectionZ * swp1;
line(zp0, zp1, image, white);
//沿Y轴向XOZ平面投影，再旋转与平移
Matrix rx = rotation_x(90);
Matrix ty = translation(Vec3f(0, -1.2f, 0));
Vec3f yp0 = ViewPort * ty * rx * ProjectionY * swp0;
Vec3f yp1 = ViewPort * ty * rx * ProjectionY * swp1;
line(yp0, yp1, image, red);
//沿X轴向YOZ平面投影，再旋转与平移
Matrix ry = rotation_y(-90);
Matrix tx = translation(Vec3f(-1.2f, 0, 0));
Vec3f xp0 = ViewPort * tx * ry * ProjectionX * swp0;
Vec3f xp1 = ViewPort * tx * ry * ProjectionX * swp1;
line(xp0, xp1, image, green);
//正等测投影图
Matrix rz = rotation_z(45);
Matrix rx1 = rotation_x(35.25);
Matrix ty1 = translation(Vec3f(0, 1.2f, 0));
Vec3f rp0 = ViewPort * ty1 * ProjectionZ * rx1 * rz *swp0;
Vec3f rp1 = ViewPort * ty1 * ProjectionZ * rx1 * rz *swp1;
line(rp0, rp1, image, yellow);
/********** end ********/
}
}
image.flip_vertically(); // i want to have the origin at the left bottom corner of the image
image.write_png_file("../img_step3/test.png");
delete model;
return 0;
}?第4关：视口变换与三视图
一. 任务描述
1. 本关任务
(1) 理解投影变换的方法; (2) 将main函数中的空白部分补充完整。
2. 输入
(1) 代码将自动输入一个边长为1的obj正方体模型，具体模型如下图：
(2) 代码自动将模型投影到二维平面，经过模型变换，生成一个长宽高不等的立方体，并将显示窗口一分为四，分为四个视口，每个视口大小均为原窗口大小的一半。红绿两线为四个视口的分隔线； (3) 在第一视口ViewPort中，首先将立方体沿Z轴向XOY平面投影。然后进行视口变换ViewPort，并绘制出一个白色矩形； (4) 在第二视口ViewPort1中，首先将立方体沿X轴向YOZ平面投影。然后沿Y轴顺时针旋转90度，最后进行视口变换ViewPort1，绘制一个绿色矩形； (5) 在第三视口ViewPort2中，首先将立方体沿Y轴向XOZ平面投影。然后沿X轴逆时针旋转90度，最后进行视口变换ViewPort2，绘制一个红矩形； (6) 在第四视口ViewPort3中，首先将立方体沿Y轴顺时针旋转45度，然后进行投影变换，投影变换参数eye和center已给出。最后进行视口变换ViewPort3，绘制一个黄色立方体。
3. 输出
具体结果如下图所示：
#include <vector>
#include <cmath>
#include <algorithm>
#include <iostream>
#include "model.h"
#include "geometry.h"
#include "pngimage.h"
using namespace std;
const double PI = acos(-1.0);
void line(Vec3i p0, Vec3i p1, PNGImage &image, PNGColor color)
{
bool steep = false;
if (std::abs(p0.x - p1.x) < std::abs(p0.y - p1.y))
{
std::swap(p0.x, p0.y);
std::swap(p1.x, p1.y);
steep = true;
}
if (p0.x > p1.x)
{
std::swap(p0.x, p1.x);
std::swap(p0.y, p1.y);
}
int dx = p1.x - p0.x;
int dy = std::abs(p1.y - p0.y);
int y = p0.y;
int d = -dx;
for (int x = p0.x; x <= p1.x; x++)
{
if (steep)
image.set(y, x, color);
else
image.set(x, y, color);
d = d + 2 * dy;
if (d > 0)
{
y += (p1.y > p0.y ? 1 : -1);
d = d - 2 * dx;
}
}
}
Matrix projection(Vec3f eye, Vec3f center)
{
Matrix m = Matrix::identity(4);
m[3][2] = -1.f / (eye - center).norm();
return m;
}
Matrix viewport(int x, int y, int w, int h, int depth) {
Matrix m = Matrix::identity(4);
m[0][3] = x + w / 2.f;
m[1][3] = y + h / 2.f;
m[2][3] = depth / 2.f;
m[0][0] = w / 2.f;
m[1][1] = h / 2.f;
m[2][2] = depth / 2.f;
return m;
}
Matrix lookat(Vec3f eye, Vec3f center, Vec3f up) {
Vec3f z = (eye - center).normalize();
Vec3f x = (up^z).normalize();
Vec3f y = (z^x).normalize();
Matrix res = Matrix::identity(4);
for (int i = 0; i < 3; i++) {
res[0][i] = x[i];
res[1][i] = y[i];
res[2][i] = z[i];
res[i][3] = -center[i];
}
return res;
}
Matrix translation(Vec3f v) {
Matrix Tr = Matrix::identity(4);
Tr[0][3] = v.x;
Tr[1][3] = v.y;
Tr[2][3] = v.z;
return Tr;
}
Matrix scale(float factorX, float factorY, float factorZ)
{
Matrix Z = Matrix::identity(4);
Z[0][0] = factorX;
Z[1][1] = factorY;
Z[2][2] = factorZ;
return Z;
}
Matrix rotation_x(float angle)
{
angle = angle * PI / 180;
float sinangle = sin(angle);
float cosangle = cos(angle);
Matrix R = Matrix::identity(4);
R[1][1] = R[2][2] = cosangle;
R[1][2] = -sinangle;
R[2][1] = sinangle;
return R;
}
Matrix rotation_y(float angle)
{
angle = angle * PI / 180;
float sinangle = sin(angle);
float cosangle = cos(angle);
Matrix R = Matrix::identity(4);
R[0][0] = R[2][2] = cosangle;
R[0][2] = sinangle;
R[2][0] = -sinangle;
return R;
}
Matrix rotation_z(float angle) {
angle = angle * PI / 180;
float sinangle = sin(angle);
float cosangle = cos(angle);
Matrix R = Matrix::identity(4);
R[0][0] = R[1][1] = cosangle;
R[0][1] = -sinangle;
R[1][0] = sinangle;
return R;
}
int main(int argc, char** argv)
{
const PNGColor white = PNGColor(255, 255, 255, 255);
const PNGColor black = PNGColor(0, 0, 0, 255);
const PNGColor red = PNGColor(255, 0, 0, 255);
const PNGColor green = PNGColor(0, 255, 0, 255);
const PNGColor blue = PNGColor(0, 0, 255, 255);
const PNGColor yellow = PNGColor(255, 255, 0, 255);
Model *model = NULL;
const int width = 800;
const int height = 800;
const int depth = 255;
//generate some image
PNGImage image(width, height, PNGImage::RGBA); //Error when RGB because lodepng_get_raw_size_lct(w, h, colortype, bitdepth) > in.size() in encode
image.init(black);
model = new Model("cube.obj");
Vec3f eye(0, 0, 4);
Vec3f center(0, 0, 0);
Matrix ProjectionX = Matrix::identity(4);
ProjectionX[0][0] = 0.0f;
Matrix ProjectionY = Matrix::identity(4);
ProjectionY[1][1] = 0.0f;
Matrix ProjectionZ = Matrix::identity(4);
ProjectionZ[2][2] = 0.0f;
Matrix ViewPort = viewport(0, height / 2, width / 2, height / 2, depth);
Matrix ViewPort1 = viewport(width / 2, height / 2, width / 2, height / 2, depth);
Matrix ViewPort2 = viewport(0, 0, width / 2, height / 2, depth);
Matrix ViewPort3 = viewport(width / 2, 0, width / 2, height / 2, depth);
// 绘制视口分隔线
Vec3f x1(0.f, height / 2, 0.f), x2(width, height / 2, 0.f);
Vec3f y1(width / 2, 0.f, 0.f), y2(width / 2, height, 0.f);
line(x1, x2, image, red);
line(y1, y2, image, green);
for (int i = 0; i < model->nfaces(); i++)
{
std::vector<int> face = model->face(i);
for (int j = 0; j < (int)face.size(); j++)
{
Vec3f wp0 = model->vert(face[j]);
Vec3f wp1 = model->vert(face[(j + 1) % face.size()]);
Matrix S0 = scale(0.5, 0.4, 0.3);
Vec3f swp0 = S0 * wp0;
Vec3f swp1 = S0 * wp1;
// Please add the code here
/********** Begin ********/
//沿Z轴向XOY平面投影
Vec3f zp0 = ViewPort * ProjectionZ * swp0;
Vec3f zp1 = ViewPort * ProjectionZ * swp1;
line(zp0, zp1, image, white);
//沿X轴向YOZ平面投影，再旋转与平移
Matrix ry = rotation_y(-90);
Vec3f xp0 = ViewPort1 * ry * ProjectionX * swp0;
Vec3f xp1 = ViewPort1 * ry * ProjectionX * swp1;
line(xp0, xp1, image, green);
//沿Y轴向XOZ平面投影，再旋转与平移
Matrix rx = rotation_x(90);
Vec3f yp0 = ViewPort2 * rx * ProjectionY * swp0;
Vec3f yp1 = ViewPort2 * rx * ProjectionY * swp1;
line(yp0, yp1, image, red);
//两点透视图
Matrix ModelView = rotation_y(-45);
Matrix Projection = projection(eye, center);
Vec3f vp0 = ViewPort3 * Projection * ModelView * swp0;
Vec3f vp1 = ViewPort3 * Projection * ModelView * swp1;
line(vp0, vp1, image, yellow);
/************End**********/
}
}
image.flip_vertically(); // i want to have the origin at the left bottom corner of the image
image.write_png_file("../img_step4/test.png");
delete model;
return 0;
}
文章来源:https://blog.csdn.net/m0_63794226/article/details/135057080
本文来自互联网用户投稿，该文观点仅代表作者本人，不代表本站立场。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。 如若内容造成侵权/违法违规/事实不符，请联系我的编程经验分享网邮箱：veading@qq.com进行投诉反馈，一经查实，立即删除！
本文来自互联网用户投稿，该文观点仅代表作者本人，不代表本站立场。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。 如若内容造成侵权/违法违规/事实不符，请联系我的编程经验分享网邮箱：veading@qq.com进行投诉反馈，一经查实，立即删除！