FlinkSQL窗口实例分析

2023-12-28 17:06:15

Windowing TVFs

Windowing table-valued functions (Windowing TVFs)，即窗口表值函数
注意：窗口函数不可以单独使用，需要聚合函数，按照 window_start、window_end 分区，即存在：group by window_start,window_end

TUMBLE函数采用三个必需参数，一个可选参数：

TUMBLE(TABLE data, DESCRIPTOR(timecol), size [, offset ])

data：是一个表参数，可以是与时间属性列的任何关系。
timecol：是一个列描述符，指示数据的哪些时间属性列应映射到滚动窗口。
size：是指定翻滚窗口宽度的持续时间。
offset: 是一个可选参数，用于指定窗口开始移动的偏移量。
HOP采用 4 个必需参数和 1 个可选参数：

HOP(TABLE data, DESCRIPTOR(timecol), slide, size [, offset ])

data：是一个表参数，可以是与时间属性列的任何关系。
timecol：是一个列描述符，指示数据的哪些时间属性列应映射到跳跃窗口。
slide：是指定连续跳跃窗口开始之间的持续时间的持续时间
size：是指定跳跃窗口宽度的持续时间。
offset: 是一个可选参数，用于指定窗口开始移动的偏移量。
CUMULATE采用 4 个必需参数和 1 个可选参数：

CUMULATE(TABLE data, DESCRIPTOR(timecol), step, size)

data：是一个表参数，可以是与时间属性列的任何关系。
timecol：是一个列描述符，指示数据的哪些时间属性列应映射到累积窗口。
step：是指定连续累积窗口末尾之间增加的窗口大小的持续时间。
size：是指定累积窗口最大宽度的持续时间。size必须是的整数倍step。
offset: 是一个可选参数，用于指定窗口开始移动的偏移量。

滚动窗口

CREATE TABLE kafka_table(
        mid bigint,
        db string,
        sch string,
        tab string,
        opt string,
        ts bigint,
        ddl string,
        err string,
        src map < string, string >,
        cur map < string, string >,
        cus map < string, string >,
        event_time as cast(TO_TIMESTAMP_LTZ(ts,3) AS TIMESTAMP(3)), -- TIMESTAMP(3)/TIMESTAMP_LTZ(3)
        WATERMARK FOR event_time AS event_time - INTERVAL '2' MINUTE     --SECOND
) WITH (
  'connector' = 'kafka',
  'topic' = 't0',
  'properties.bootstrap.servers' = 'xx.xx.xx.xx:9092',
  'scan.startup.mode' = 'earliest-offset',  --group-offsets/earliest-offset/latest-offset
  'format' = 'json'
);

create view tmp as
select
            COALESCE(cur['group_name'], src['group_name']) group_name,
            COALESCE(cur['batch_number'], src['batch_number']) batch_number,
            event_time
from kafka_table
where UPPER(opt) <> 'DELETE';
--注意：窗口函数不可以单独使用，需要聚合函数，按照 window_start、window_end 分区

select window_start,window_end,window_time,group_name,count(*) as cnt from
TABLE(TUMBLE(TABLE tmp, DESCRIPTOR(event_time), INTERVAL '10' MINUTES))
group by window_start,window_end,window_time,group_name

滑动窗口

CREATE TABLE kafka_table(
        mid bigint,
        db string,
        sch string,
        tab string,
        opt string,
        ts bigint,
        ddl string,
        err string,
        src map < string, string >,
        cur map < string, string >,
        cus map < string, string >,
        event_time as cast(TO_TIMESTAMP_LTZ(ts,3) AS TIMESTAMP(3)), -- TIMESTAMP(3)/TIMESTAMP_LTZ(3)
        WATERMARK FOR event_time AS event_time - INTERVAL '2' MINUTE     --SECOND
) WITH (
  'connector' = 'kafka',
  'topic' = 't0',
  'properties.bootstrap.servers' = 'xx.xx.xx.xx:9092',
  'scan.startup.mode' = 'earliest-offset',  --group-offsets/earliest-offset/latest-offset
  'format' = 'json'
);

create view tmp as
select
            COALESCE(cur['group_name'], src['group_name']) group_name,
            COALESCE(cur['batch_number'], src['batch_number']) batch_number,
            event_time
from kafka_table
where UPPER(opt) <> 'DELETE';
--注意：窗口函数不可以单独使用，需要聚合函数，按照 window_start、window_end 分区

select window_start,window_end,window_time,group_name,count(*) as cnt from
TABLE(HOP(TABLE tmp, DESCRIPTOR(event_time), INTERVAL '60' SECOND,INTERVAL '10' MINUTES))
group by window_start,window_end,window_time,group_name

累计窗口

CREATE TABLE kafka_table(
        mid bigint,
        db string,
        sch string,
        tab string,
        opt string,
        ts bigint,
        ddl string,
        err string,
        src map < string, string >,
        cur map < string, string >,
        cus map < string, string >,
        event_time as cast(TO_TIMESTAMP_LTZ(ts,3) AS TIMESTAMP(3)), -- TIMESTAMP(3)/TIMESTAMP_LTZ(3)
        WATERMARK FOR event_time AS event_time - INTERVAL '2' MINUTE     --SECOND
) WITH (
  'connector' = 'kafka',
  'topic' = 't0',
  'properties.bootstrap.servers' = 'xx.xx.xx.xx:9092',
  'scan.startup.mode' = 'earliest-offset',  --group-offsets/earliest-offset/latest-offset
  'format' = 'json'
);

create view tmp as
select
            COALESCE(cur['group_name'], src['group_name']) group_name,
            COALESCE(cur['batch_number'], src['batch_number']) batch_number,
            event_time
from kafka_table
where UPPER(opt) <> 'DELETE';
--注意：窗口函数不可以单独使用，需要聚合函数，按照 window_start、window_end 分区

select window_start,window_end,window_time,group_name,count(*) as cnt from
TABLE(CUMULATE(TABLE tmp, DESCRIPTOR(event_time), INTERVAL '1' HOUR,INTERVAL '24' HOURS)) --从零点开始累计
TABLE(CUMULATE(TABLE tmp, DESCRIPTOR(event_time), INTERVAL '60' SECOND,INTERVAL '10' MINUTES))
TABLE(CUMULATE(TABLE tmp, DESCRIPTOR(event_time), INTERVAL '1' MINUTE,INTERVAL '1' HOURS))
group by window_start,window_end,window_time,group_name

窗口聚合-多维分析

CREATE TABLE kafka_table(
        mid bigint,
        db string,
        sch string,
        tab string,
        opt string,
        ts bigint,
        ddl string,
        err string,
        src map < string, string >,
        cur map < string, string >,
        cus map < string, string >,
        event_time as cast(TO_TIMESTAMP_LTZ(ts,3) AS TIMESTAMP(3)), -- TIMESTAMP(3)/TIMESTAMP_LTZ(3)
        WATERMARK FOR event_time AS event_time - INTERVAL '2' MINUTE     --SECOND
) WITH (
  'connector' = 'kafka',
  'topic' = 't0',
  'properties.bootstrap.servers' = 'xx.xx.xx.xx:9092',
  'scan.startup.mode' = 'earliest-offset',  --group-offsets/earliest-offset/latest-offset
  'format' = 'json'
);

create view tmp as
select
            COALESCE(cur['group_name'], src['group_name']) group_name,
            COALESCE(cur['batch_number'], src['batch_number']) batch_number,
            event_time
from kafka_table
where UPPER(opt) <> 'DELETE';
--注意：窗口函数不可以单独使用，需要聚合函数，按照 window_start、window_end 分区


--实例1：整体聚合
select window_start,window_end,count(*) as cnt from
TABLE(TUMBLE(TABLE tmp, DESCRIPTOR(event_time), INTERVAL '10' MINUTES))
group by window_start,window_end

--实例2：根据字段聚合,n个维度
select window_start,window_end,group_name,count(*) as cnt from
TABLE(TUMBLE(TABLE tmp, DESCRIPTOR(event_time), INTERVAL '10' MINUTES))
group by window_start,window_end,group_name

--实例3：多维分析GROUPING SETS
select window_start,window_end,group_name,count(*) as cnt from
TABLE(TUMBLE(TABLE tmp, DESCRIPTOR(event_time), INTERVAL '10' MINUTES))
group by window_start,window_end,GROUPING SETS((group_name)) --等同于 实例2
group by window_start,window_end,GROUPING SETS((group_name), ()) --等同于 实例1 union all 实例2


--实例4：多维分析GROUPING SETS,多个字段
select window_start,window_end,group_name,batch_number,count(*) as cnt from
TABLE(TUMBLE(TABLE tmp, DESCRIPTOR(event_time), INTERVAL '10' MINUTES))
group by window_start,window_end,GROUPING SETS((group_name,batch_number),(group_name),(batch_number),())

--实例5：多维分析CUBE 2^n个维度
select window_start,window_end,group_name,batch_number,count(*) as cnt from
TABLE(TUMBLE(TABLE tmp, DESCRIPTOR(event_time), INTERVAL '10' MINUTES))
group by window_start,window_end,CUBE(group_name) --等同于group by window_start,window_end,GROUPING SETS((group_name), ())
group by window_start,window_end,CUBE(group_name,batch_number) --等同于实例4

--实例6：多维分析ROLLUP  n+1个维度
select window_start,window_end,group_name,batch_number,count(*) as cnt from
TABLE(TUMBLE(TABLE tmp, DESCRIPTOR(event_time), INTERVAL '10' MINUTES))
group by window_start,window_end,ROLLUP(group_name) --等同于 实例1 union all 实例2
group by window_start,window_end,ROLLUP(group_name,batch_number) --等同于GROUPING SETS((group_name,batch_number),(group_name),())

窗口topN

Window Top-N 语句的语法：

SELECT [column_list]
FROM (
   SELECT [column_list],
     ROW_NUMBER() OVER (PARTITION BY window_start, window_end [, col_key1...]
       ORDER BY col1 [asc|desc][, col2 [asc|desc]...]) AS rownum
   FROM table_name) -- relation applied windowing TVF
WHERE rownum <= N [AND conditions]

CREATE TABLE kafka_table(
        mid bigint,
        db string,
        sch string,
        tab string,
        opt string,
        ts bigint,
        ddl string,
        err string,
        src map < string, string >,
        cur map < string, string >,
        cus map < string, string >,
        event_time as cast(TO_TIMESTAMP_LTZ(ts,3) AS TIMESTAMP(3)), -- TIMESTAMP(3)/TIMESTAMP_LTZ(3)
        WATERMARK FOR event_time AS event_time - INTERVAL '2' MINUTE     --SECOND
) WITH (
  'connector' = 'kafka',
  'topic' = 't0',
  'properties.bootstrap.servers' = 'xx.xx.xx.xx:9092',
  'scan.startup.mode' = 'earliest-offset',  --group-offsets/earliest-offset/latest-offset
  'format' = 'json'
);

create view tmp as
select
            COALESCE(cur['group_name'], src['group_name']) group_name,
            COALESCE(cur['batch_number'], src['batch_number']) batch_number,
            event_time
from kafka_table
where UPPER(opt) <> 'DELETE';
--注意：窗口函数不可以单独使用，需要聚合函数，按照 window_start、window_end 分区


--方式1：窗口 Top-N 紧随窗口聚合之后
create view tmp_window as
select window_start,window_end,window_time,group_name,count(*) as cnt from
TABLE(TUMBLE(TABLE tmp, DESCRIPTOR(event_time), INTERVAL '24' HOURS))
group by window_start,window_end,window_time,group_name;

--计算每个翻滚 24小时窗口内pv最高的前 3 名机构(即每天PV最高的前三名)
select * from
    (
    select * ,ROW_NUMBER() OVER (PARTITION BY window_start, window_end ORDER BY cnt DESC) as rn
    from tmp_window
    ) t
where rn <=3

--计算每个机构pv最高的前 3天
select * from
    (
    select * ,ROW_NUMBER() OVER (PARTITION BY group_name ORDER BY cnt DESC) as rn
    from tmp_window
    ) t
where rn <=3

--方式2：窗口 Top-N 紧随窗口 TVF 之后
select *
from
    (
    select
    window_start
    ,window_end
    ,window_time
    ,group_name
    ,ts
    ,ROW_NUMBER() OVER (PARTITION BY window_start, window_end ORDER BY ts DESC) AS rn
    from TABLE(TUMBLE(TABLE tmp, DESCRIPTOR(event_time), INTERVAL '24' HOURS))
    )
where rn <=3

窗口去重

Flink使用去重的方式，就像Window Top-N查询ROW_NUMBER()的方式一样。理论上，
窗口重复数据删除是窗口 Top-N 的一种特殊情况，其中 N 为 1，并且按处理时间或事件时间排序
Window Deduplication 语句的语法：

SELECT [column_list]
FROM (
   SELECT [column_list],
     ROW_NUMBER() OVER (PARTITION BY window_start, window_end [, col_key1...]
       ORDER BY time_attr [asc|desc]) AS rownum
   FROM table_name) -- relation applied windowing TVF
WHERE (rownum = 1 | rownum <=1 | rownum < 2) [AND conditions]

CREATE TABLE kafka_table(
        mid bigint,
        db string,
        sch string,
        tab string,
        opt string,
        ts bigint,
        ddl string,
        err string,
        src map < string, string >,
        cur map < string, string >,
        cus map < string, string >,
        group_name as COALESCE(cur['group_name'], src['group_name']),
        batch_number as COALESCE(cur['batch_number'], src['batch_number']),
        event_time as cast(TO_TIMESTAMP_LTZ(ts,3) AS TIMESTAMP(3)), -- TIMESTAMP(3)/TIMESTAMP_LTZ(3)
        WATERMARK FOR event_time AS event_time - INTERVAL '2' MINUTE     --SECOND
) WITH (
  'connector' = 'kafka',
  'topic' = 't0',
  'properties.bootstrap.servers' = 'xx.xx.xx.xx:9092',
  'scan.startup.mode' = 'earliest-offset',  --group-offsets/earliest-offset/latest-offset
  'format' = 'json'
);

select *
from
    (
    select
    window_start
    ,window_end
    ,group_name
    ,event_time
    ,ROW_NUMBER() OVER (PARTITION BY window_start, window_end ORDER BY event_time DESC) AS rn
    from TABLE(TUMBLE(TABLE kafka_table, DESCRIPTOR(event_time), INTERVAL '24' HOURS))
    )
where rn =1

文章来源:https://blog.csdn.net/weixin_38251332/article/details/135269551
本文来自互联网用户投稿，该文观点仅代表作者本人，不代表本站立场。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如若内容造成侵权/违法违规/事实不符，请联系我的编程经验分享网邮箱：veading@qq.com进行投诉反馈，一经查实，立即删除！